linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: <Ryan.Wanner@microchip.com>
To: <mturquette@baylibre.com>, <sboyd@kernel.org>,
	<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<claudiu.beznea@tuxon.dev>
Cc: <varshini.rajendran@microchip.com>, <linux-clk@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <robh@kernel.org>,
	Ryan Wanner <Ryan.Wanner@microchip.com>
Subject: [PATCH v3 00/32] clk: at91: add support for parent_data and
Date: Thu, 10 Jul 2025 13:06:53 -0700	[thread overview]
Message-ID: <cover.1752176711.git.Ryan.Wanner@microchip.com> (raw)

From: Ryan Wanner <Ryan.Wanner@microchip.com>

This series adds support for parent data and parent _hw on the at91
clock drivers. This also updates all the SoC specific clock drivers to
use this format as well.

This is a continuation of the V1 of this series here [1].

This has been tested on the SAMA5* SoCs, the sam9x* SoCs, and the SAMA7*
SoCs.

Changes v1 -> V2:
- Remove all the small sama7g54 SoC driver changes and put them in their
  own patch.
- Add the SAMA7D65 and the SAM9X75 to this update.
- Add a patch to move all common used macros into the pmc.h file.
- Update changes from v6.6 to v6.16.
- Remove patches that where style fixes and include those in the update.

Changes v2 -> v3:
- Adjust each patch so they are fully atomic.
- Add a patch to have the SAMA7D65 systemclocks use parent_data and
  parent_hw.
- Add a formatting cleanup patch for the SAM9X75.
- Adjust commit messages that no longer show invalid information.


1) https://lore.kernel.org/all/20230727053156.13587-1-claudiu.beznea@tuxon.dev/


Claudiu Beznea (28):
  clk: at91: pmc: add macros for clk_parent_data
  clk: at91: clk-sam9x60-pll: use clk_parent_data
  clk: at91: clk-peripheral: switch to clk_parent_data
  clk: at91: clk-main: switch to clk parent data
  clk: at91: clk-utmi: use clk_parent_data
  clk: at91: clk-master: use clk_parent_data
  clk: at91: clk-programmable: use clk_parent_data
  clk: at91: clk-generated: use clk_parent_data
  clk: at91: clk-usb: add support for clk_parent_data
  clk: at91: clk-system: use clk_parent_data
  clk: at91: clk-pll: add support for parent_hw
  clk: at91: clk-audio-pll: add support for parent_hw
  clk: at91: clk-plldiv: add support for parent_hw
  clk: at91: clk-h32mx: add support for parent_hw
  clk: at91: clk-i2s-mux: add support for parent_hw
  clk: at91: clk-smd: add support for clk_parent_data
  clk: at91: clk-slow: add support for parent_hw
  clk: at91: dt-compat: switch to parent_hw and parent_data
  clk: at91: sam9x60: switch to parent_hw and parent_data
  clk: at91: sama5d2: switch to parent_hw and parent_data
  clk: at91: sama5d3: switch to parent_hw and parent_data
  clk: at91: sama5d4: switch to parent_hw and parent_data
  clk: at91: at91sam9x5: switch to parent_hw and parent_data
  clk: at91: at91rm9200: switch to parent_hw and parent_data
  clk: at91: at91sam9260: switch to parent_hw and parent_data
  clk: at91: at91sam9g45: switch to parent_hw and parent_data
  clk: at91: at91sam9n12: switch to parent_hw and parent_data
  clk: at91: at91sam9rl: switch to clk_parent_data

Ryan Wanner (4):
  clk: at91: pmc: Move macro to header file
  clk: at91: sam9x75: switch to parent_hw and parent_data
  clk: at91: sama7d65: switch to parent_hw and parent_data
  clk: at91: sam9x7: Clean up formatting

 drivers/clk/at91/at91rm9200.c       |  95 ++++----
 drivers/clk/at91/at91sam9260.c      | 136 ++++++------
 drivers/clk/at91/at91sam9g45.c      |  89 ++++----
 drivers/clk/at91/at91sam9n12.c      | 106 ++++-----
 drivers/clk/at91/at91sam9rl.c       |  63 +++---
 drivers/clk/at91/at91sam9x5.c       | 125 ++++++-----
 drivers/clk/at91/clk-audio-pll.c    |  28 ++-
 drivers/clk/at91/clk-generated.c    |   8 +-
 drivers/clk/at91/clk-h32mx.c        |  11 +-
 drivers/clk/at91/clk-i2s-mux.c      |   6 +-
 drivers/clk/at91/clk-main.c         |  16 +-
 drivers/clk/at91/clk-master.c       |  24 +-
 drivers/clk/at91/clk-peripheral.c   |  16 +-
 drivers/clk/at91/clk-pll.c          |   9 +-
 drivers/clk/at91/clk-plldiv.c       |  11 +-
 drivers/clk/at91/clk-programmable.c |   8 +-
 drivers/clk/at91/clk-sam9x60-pll.c  |  14 +-
 drivers/clk/at91/clk-slow.c         |   8 +-
 drivers/clk/at91/clk-smd.c          |  10 +-
 drivers/clk/at91/clk-system.c       |   8 +-
 drivers/clk/at91/clk-usb.c          |  41 ++--
 drivers/clk/at91/clk-utmi.c         |  16 +-
 drivers/clk/at91/dt-compat.c        |  80 +++++--
 drivers/clk/at91/pmc.h              |  66 +++---
 drivers/clk/at91/sam9x60.c          | 117 +++++-----
 drivers/clk/at91/sam9x7.c           | 328 ++++++++++++++++------------
 drivers/clk/at91/sama5d2.c          | 168 +++++++-------
 drivers/clk/at91/sama5d3.c          | 122 ++++++-----
 drivers/clk/at91/sama5d4.c          | 129 +++++------
 drivers/clk/at91/sama7d65.c         | 156 ++++++-------
 drivers/clk/at91/sama7g5.c          | 111 +++++-----
 31 files changed, 1134 insertions(+), 991 deletions(-)

-- 
2.43.0



             reply	other threads:[~2025-07-10 22:14 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-10 20:06 Ryan.Wanner [this message]
2025-07-10 20:06 ` [PATCH v3 01/32] clk: at91: pmc: add macros for clk_parent_data Ryan.Wanner
2025-08-28 16:52   ` Brian Masney
2025-09-06 18:33   ` claudiu beznea
2025-07-10 20:06 ` [PATCH v3 02/32] clk: at91: pmc: Move macro to header file Ryan.Wanner
2025-08-28 16:53   ` Brian Masney
2025-07-10 20:06 ` [PATCH v3 03/32] clk: at91: sam9x75: switch to parent_hw and parent_data Ryan.Wanner
2025-08-28 17:38   ` Brian Masney
2025-09-06 18:33   ` Claudiu Beznea
2025-07-10 20:06 ` [PATCH v3 04/32] clk: at91: clk-sam9x60-pll: use clk_parent_data Ryan.Wanner
2025-08-28 17:04   ` Brian Masney
2025-09-06 18:34   ` claudiu beznea
2025-07-10 20:06 ` [PATCH v3 05/32] clk: at91: clk-peripheral: switch to clk_parent_data Ryan.Wanner
2025-09-06 18:34   ` claudiu beznea
2025-07-10 20:06 ` [PATCH v3 06/32] clk: at91: clk-main: switch to clk parent data Ryan.Wanner
2025-09-06 18:35   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 07/32] clk: at91: clk-utmi: use clk_parent_data Ryan.Wanner
2025-09-06 18:36   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 08/32] clk: at91: clk-master: " Ryan.Wanner
2025-09-06 18:36   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 09/32] clk: at91: clk-programmable: " Ryan.Wanner
2025-09-06 18:36   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 10/32] clk: at91: clk-generated: " Ryan.Wanner
2025-09-06 18:37   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 11/32] clk: at91: clk-usb: add support for clk_parent_data Ryan.Wanner
2025-09-06 18:37   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 12/32] clk: at91: clk-system: use clk_parent_data Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 13/32] clk: at91: sama7d65: switch to parent_hw and parent_data Ryan.Wanner
2025-09-06 18:39   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 14/32] clk: at91: clk-pll: add support for parent_hw Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 15/32] clk: at91: clk-audio-pll: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 16/32] clk: at91: clk-plldiv: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 17/32] clk: at91: clk-h32mx: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 18/32] clk: at91: clk-i2s-mux: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 19/32] clk: at91: clk-smd: add support for clk_parent_data Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 20/32] clk: at91: clk-slow: add support for parent_hw Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 21/32] clk: at91: dt-compat: switch to parent_hw and parent_data Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 22/32] clk: at91: sam9x60: " Ryan.Wanner
2025-09-06 18:46   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 23/32] clk: at91: sama5d2: " Ryan.Wanner
2025-09-06 18:48   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 24/32] clk: at91: sama5d3: " Ryan.Wanner
2025-09-06 18:49   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 25/32] clk: at91: sama5d4: " Ryan.Wanner
2025-09-06 18:51   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 26/32] clk: at91: at91sam9x5: " Ryan.Wanner
     [not found]   ` <10f016fd-2ceb-40b0-a81d-9c5663f65191@tuxon.dev>
2025-09-06 18:52     ` Claudiu Beznea
2025-07-10 20:07 ` [PATCH v3 27/32] clk: at91: at91rm9200: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 28/32] clk: at91: at91sam9260: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 29/32] clk: at91: at91sam9g45: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 30/32] clk: at91: at91sam9n12: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 31/32] clk: at91: at91sam9rl: switch to clk_parent_data Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 32/32] clk: at91: sam9x7: Clean up formatting Ryan.Wanner
2025-08-27 20:31 ` [PATCH v3 00/32] clk: at91: add support for parent_data and Ryan Wanner
2025-08-28 15:51 ` Brian Masney
2025-08-28 16:16   ` Ryan Wanner
2025-08-28 16:48     ` Brian Masney
2025-08-28 20:40       ` Konstantin Ryabitsev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1752176711.git.Ryan.Wanner@microchip.com \
    --to=ryan.wanner@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=claudiu.beznea@tuxon.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=varshini.rajendran@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).