From: Geert Uytterhoeven <geert+renesas@glider.be>
To: soc@lists.linux.dev
Cc: Magnus Damm <magnus.damm@gmail.com>,
linux-arm-kernel@lists.infradead.org,
linux-renesas-soc@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [GIT PULL 4/4] Renesas DTS updates for v7.1
Date: Fri, 13 Mar 2026 12:13:00 +0100 [thread overview]
Message-ID: <cover.1773399675.git.geert+renesas@glider.be> (raw)
In-Reply-To: <cover.1773399669.git.geert+renesas@glider.be>
The following changes since commit 85c2601e2c2feb60980c7ca23de28c49472f61f1:
arm64: dts: renesas: r8a78000: Fix out-of-range SPI interrupt numbers (2026-03-06 13:15:21 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git tags/renesas-dts-for-v7.1-tag1
for you to fetch changes up to 0928a28daf017504e14920f4131bb99e3bc39dba:
ARM: dts: renesas: armadillo800eva: Add wakeup-source to st1232 (2026-03-13 11:00:48 +0100)
----------------------------------------------------------------
Renesas DTS updates for v7.1
- Add CPU frequency scaling and QSPI NOR FLASH support on the RZ/N1
SoC and the RZN1D-DB development board,
- Add PCIe slot power control on the R-Car H3, M3-W(+), M3-N, and E3
SoCs,
- Add USB3.0 PHY support on the R-Car E3 SoC and the Ebisu development
board,
- Add PCIe/USB3.0 clock generator support on the Salvator-X(S), ULCB
King Fisher extension, and Ebisu development boards,
- Add RTC support on the RZ/V2N SoC and its EVK board,
- Add SPI DMA support on the RZ/T2H, RZ/N2H, RZ/V2H(P), and RZ/V2N
SoCs,
- Add support for the second SDHI channel on the Atmark Techno
Armadillo-800-EVA board,
- Miscellaneous fixes and improvements.
Note that this PR is based on "[GIT PULL] Renesas SoC fixes for v7.0".
----------------------------------------------------------------
Cosmin Tanislav (2):
arm64: dts: renesas: r9a09g077: Wire up DMA support for SPI
arm64: dts: renesas: r9a09g087: Wire up DMA support for SPI
Geert Uytterhoeven (1):
ARM: dts: renesas: r9a06g032-rzn1d400-db: Do not use underscores in node names
Herve Codina (Schneider Electric) (1):
ARM: dts: renesas: r9a06g032: Add support for CPU frequency scaling
Lad Prabhakar (2):
arm64: dts: renesas: r9a09g056: Add DMA support for RSPI channels
arm64: dts: renesas: r9a09g057: Add DMA support for RSPI channels
Marek Vasut (10):
arm64: dts: renesas: sparrow-hawk: Mark OTP and HSCIF0 pins as bootph-all
arm64: dts: renesas: r8a77951: Describe PCIe root ports
arm64: dts: renesas: r8a77960: Describe PCIe root ports
arm64: dts: renesas: r8a77961: Describe PCIe root ports
arm64: dts: renesas: r8a77965: Describe PCIe root ports
arm64: dts: renesas: r8a77990: Describe PCIe root port
arm64: dts: renesas: r8a77990: Add USB 3.0 PHY and USB3S0 clock nodes
arm64: dts: renesas: salvator-common: Describe PCIe/USB3.0 clock generator
arm64: dts: renesas: ulcb: ulcb-kf: Describe PCIe/USB3.0 clock generator
arm64: dts: renesas: ebisu: Describe PCIe/USB3.0 clock generator
Miquel Raynal (Schneider Electric) (1):
ARM: dts: renesas: r9a06g032: Describe the QSPI controller
Ovidiu Panait (2):
arm64: dts: renesas: r9a09g056: Add RTC node
arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Enable RTC
Wolfram Sang (2):
ARM: dts: renesas: r9a06g032-rzn1d400-db: Add QSPI node including NOR flash
ARM: dts: renesas: r9a06g032-rzn1d400-db: Use interrupts for Micrel PHYs
bui duc phuc (2):
ARM: dts: renesas: armadillo800eva: Enable SDHI1
ARM: dts: renesas: armadillo800eva: Add wakeup-source to st1232
.../boot/dts/renesas/r8a7740-armadillo800eva.dts | 32 ++++++
.../arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts | 111 +++++++++++++++++++--
arch/arm/boot/dts/renesas/r9a06g032.dtsi | 47 +++++++++
arch/arm64/boot/dts/renesas/ebisu.dtsi | 43 +++++++-
arch/arm64/boot/dts/renesas/r8a77951.dtsi | 20 ++++
arch/arm64/boot/dts/renesas/r8a77960.dtsi | 20 ++++
arch/arm64/boot/dts/renesas/r8a77961.dtsi | 20 ++++
arch/arm64/boot/dts/renesas/r8a77965.dtsi | 20 ++++
arch/arm64/boot/dts/renesas/r8a77990.dtsi | 27 +++++
.../boot/dts/renesas/r8a779g3-sparrow-hawk.dts | 5 +
arch/arm64/boot/dts/renesas/r9a09g056.dtsi | 36 +++++++
.../boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts | 4 +
arch/arm64/boot/dts/renesas/r9a09g057.dtsi | 21 ++++
arch/arm64/boot/dts/renesas/r9a09g077.dtsi | 16 +++
arch/arm64/boot/dts/renesas/r9a09g087.dtsi | 16 +++
arch/arm64/boot/dts/renesas/salvator-common.dtsi | 28 +++++-
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 21 +++-
arch/arm64/boot/dts/renesas/ulcb.dtsi | 13 +++
18 files changed, 490 insertions(+), 10 deletions(-)
next prev parent reply other threads:[~2026-03-13 11:13 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-13 11:12 [GIT PULL 0/4] Renesas SoC updates for v7.1 Geert Uytterhoeven
2026-03-13 11:12 ` [GIT PULL 1/4] Renesas ARM defconfig " Geert Uytterhoeven
2026-03-13 11:12 ` [GIT PULL 2/4] Renesas driver " Geert Uytterhoeven
2026-03-13 11:12 ` [GIT PULL 3/4] Renesas DT binding " Geert Uytterhoeven
2026-03-14 11:09 ` Krzysztof Kozlowski
2026-03-16 8:51 ` Geert Uytterhoeven
2026-03-17 9:29 ` Krzysztof Kozlowski
2026-03-17 9:53 ` Krzysztof Kozlowski
2026-03-18 12:58 ` Arnd Bergmann
2026-03-13 11:13 ` Geert Uytterhoeven [this message]
2026-03-14 11:13 ` [GIT PULL 4/4] Renesas DTS " Krzysztof Kozlowski
2026-03-16 8:15 ` Geert Uytterhoeven
2026-03-14 11:23 ` Krzysztof Kozlowski
2026-03-16 8:18 ` Geert Uytterhoeven
2026-03-16 8:22 ` Krzysztof Kozlowski
2026-03-16 8:25 ` Geert Uytterhoeven
2026-03-17 8:32 ` [GIT PULL 0/4] Renesas SoC " Krzysztof Kozlowski
2026-03-17 8:46 ` Geert Uytterhoeven
2026-03-17 9:11 ` Krzysztof Kozlowski
2026-03-18 12:56 ` Arnd Bergmann
2026-03-18 13:12 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1773399675.git.geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=soc@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox