* [PATCH v2 1/3] dt-bindings: arm: fsl: add Variscite DART-MX93 Boards
2026-03-27 9:08 [PATCH v2 0/3] Add support for Variscite DART-MX93 and Sonata board Stefano Radaelli
@ 2026-03-27 9:08 ` Stefano Radaelli
2026-03-27 9:08 ` [PATCH v2 2/3] arm64: dts: freescale: Add support for Variscite DART-MX93 Stefano Radaelli
2026-03-27 9:08 ` [PATCH v2 3/3] arm64: dts: imx93-var-dart: Add support for Variscite Sonata board Stefano Radaelli
2 siblings, 0 replies; 4+ messages in thread
From: Stefano Radaelli @ 2026-03-27 9:08 UTC (permalink / raw)
To: linux-kernel, devicetree, imx, linux-arm-kernel
Cc: pierluigi.p, Stefano Radaelli, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Frank Li, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, Shawn Guo, Dario Binacchi, Alexander Stein,
Maud Spierings, Josua Mayer, Markus Niebel, Primoz Fiser,
Francesco Dolcini, Conor Dooley
From: Stefano Radaelli <stefano.r@variscite.com>
Add DT compatible strings for Variscite DART-MX93 SoM and Variscite
development carrier Board.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
-
Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index da2be7114f64..77497a261fd5 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1587,6 +1587,12 @@ properties:
- const: variscite,var-dart-mx91 # Variscite DART-MX91 SOM
- const: fsl,imx91
+ - description: Variscite DART-MX93 based boards
+ items:
+ - const: variscite,var-dart-mx93-sonata # Variscite DART-MX93 on Sonata Development Board
+ - const: variscite,var-dart-mx93 # Variscite DART-MX93 SOM
+ - const: fsl,imx93
+
- description: Variscite VAR-SOM-MX93 based boards
items:
- const: variscite,var-som-mx93-symphony
--
2.47.3
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v2 2/3] arm64: dts: freescale: Add support for Variscite DART-MX93
2026-03-27 9:08 [PATCH v2 0/3] Add support for Variscite DART-MX93 and Sonata board Stefano Radaelli
2026-03-27 9:08 ` [PATCH v2 1/3] dt-bindings: arm: fsl: add Variscite DART-MX93 Boards Stefano Radaelli
@ 2026-03-27 9:08 ` Stefano Radaelli
2026-03-27 9:08 ` [PATCH v2 3/3] arm64: dts: imx93-var-dart: Add support for Variscite Sonata board Stefano Radaelli
2 siblings, 0 replies; 4+ messages in thread
From: Stefano Radaelli @ 2026-03-27 9:08 UTC (permalink / raw)
To: linux-kernel, devicetree, imx, linux-arm-kernel
Cc: pierluigi.p, Stefano Radaelli, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Frank Li, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, Shawn Guo, Dario Binacchi, Alexander Stein,
Maud Spierings, Josua Mayer, Markus Niebel, Primoz Fiser,
Francesco Dolcini
From: Stefano Radaelli <stefano.r@variscite.com>
Add device tree support for the Variscite DART-MX93 system on module.
This SOM is designed to be used with various carrier boards.
The module includes:
- NXP i.MX93 MPU processor
- Up to 2GB of LPDDR4 memory
- Up to 128GB of eMMC storage memory
- Integrated 10/100/1000 Mbps Ethernet Transceiver
- Codec audio WM8904
- WIFI6 dual-band 802.11ax/ac/a/b/g/n with optional 802.15.4 and Bluetooth
Only SOM-specific peripherals are enabled by default. Carrier board
specific interfaces are left disabled to be enabled in the respective
carrier board device trees.
Link: https://variscite.com/system-on-module-som/i-mx-9/i-mx-93/dart-mx93/
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
- Remove clock-frequency property from eqos node
.../boot/dts/freescale/imx93-var-dart.dtsi | 461 ++++++++++++++++++
1 file changed, 461 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi
new file mode 100644
index 000000000000..69495bb7fc9f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common dtsi for Variscite DART-MX93
+ *
+ * Link: https://variscite.com/system-on-module-som/i-mx-9/i-mx-93/dart-mx93/
+ *
+ * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx93.dtsi"
+
+/ {
+ model = "Variscite DART-MX93 Module";
+ compatible = "variscite,var-dart-mx93", "fsl,imx93";
+
+ sound-wm8904 {
+ compatible = "simple-audio-card";
+ simple-audio-card,bitclock-master = <&codec_dai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&codec_dai>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "wm8904-audio";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "IN2L", "Line In Jack",
+ "IN2R", "Line In Jack",
+ "IN1L", "Microphone Jack",
+ "IN1R", "Microphone Jack";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Line", "Line In Jack";
+
+ codec_dai: simple-audio-card,codec {
+ sound-dai = <&wm8904>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai1>;
+ };
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ post-power-on-delay-ms = <100>;
+ power-off-delay-us = <10000>;
+ reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>, /* WIFI_RESET */
+ <&gpio3 7 GPIO_ACTIVE_LOW>; /* WIFI_PWR_EN */
+ };
+};
+
+&cm33 {
+ mbox-names = "tx", "rx", "rxdb";
+ mboxes = <&mu1 0 1>,
+ <&mu1 1 1>,
+ <&mu1 3 1>;
+ memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+ <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+ status = "okay";
+};
+
+&eqos {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_eqos>;
+ pinctrl-1 = <&pinctrl_eqos_sleep>;
+ /*
+ * The required RGMII TX and RX 2ns delays are implemented directly
+ * in hardware via passive delay elements on the SOM PCB.
+ * No delay configuration is needed in software via PHY driver.
+ */
+ phy-mode = "rgmii";
+ phy-handle = <ðphy0>;
+ snps,clk-csr = <5>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <100000>;
+ };
+ };
+};
+
+&lpi2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep", "gpio";
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ pinctrl-1 = <&pinctrl_lpi2c3_gpio>;
+ pinctrl-2 = <&pinctrl_lpi2c3_gpio>;
+ scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ wm8904: audio-codec@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ #sound-dai-cells = <0>;
+ clocks = <&clk IMX93_CLK_SAI1_GATE>;
+ clock-names = "mclk";
+ AVDD-supply = <&buck5>;
+ CPVDD-supply = <&buck5>;
+ DBVDD-supply = <&buck4>;
+ DCVDD-supply = <&buck5>;
+ MICVDD-supply = <&buck5>;
+ wlf,drc-cfg-names = "default", "peaklimiter", "tradition",
+ "soft", "music";
+ /*
+ * Config registers per name, respectively:
+ * KNEE_IP = 0, KNEE_OP = 0, HI_COMP = 1, LO_COMP = 1
+ * KNEE_IP = -24, KNEE_OP = -6, HI_COMP = 1/4, LO_COMP = 1
+ * KNEE_IP = -42, KNEE_OP = -3, HI_COMP = 0, LO_COMP = 1
+ * KNEE_IP = -45, KNEE_OP = -9, HI_COMP = 1/8, LO_COMP = 1
+ * KNEE_IP = -30, KNEE_OP = -10.5, HI_COMP = 1/4, LO_COMP = 1
+ */
+ wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>,
+ /bits/ 16 <0x04af 0x324b 0x0010 0x0408>,
+ /bits/ 16 <0x04af 0x324b 0x0028 0x0704>,
+ /bits/ 16 <0x04af 0x324b 0x0018 0x078c>,
+ /bits/ 16 <0x04af 0x324b 0x0010 0x050e>;
+ /* GPIO1 = DMIC_CLK, don't touch others */
+ wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>;
+ /* DMIC is connected to IN1L */
+ wlf,in1l-as-dmicdat1;
+ };
+
+ pmic@25 {
+ compatible = "nxp,pca9451a";
+ reg = <0x25>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <2237500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck2: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck4: BUCK4 {
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5: BUCK5 {
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6: BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5: LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+/* BT module */
+&lpuart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>, <&pinctrl_bt>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "nxp,88w8987-bt";
+ };
+};
+
+&mu1 {
+ status = "okay";
+};
+
+&mu2 {
+ status = "okay";
+};
+
+&sai1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_sai1>;
+ pinctrl-1 = <&pinctrl_sai1_sleep>;
+ assigned-clocks = <&clk IMX93_CLK_SAI1>;
+ assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+ assigned-clock-rates = <12288000>;
+ #sound-dai-cells = <0>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+/* WiFi */
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
+ pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ keep-power-in-suspend;
+ bus-width = <4>;
+ non-removable;
+ wakeup-source;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_bt: btgrp {
+ fsl,pins = <
+ MX93_PAD_ENET2_MDIO__GPIO4_IO15 0x51e
+ >;
+ };
+
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e
+ MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e
+ MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
+ MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
+ MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
+ MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
+ MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x58e
+ MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
+ MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e
+ MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e
+ MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e
+ MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e
+ MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e
+ MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e
+ MX93_PAD_UART2_TXD__GPIO1_IO07 0x51e
+ >;
+ };
+
+ pinctrl_eqos_sleep: eqos-sleepgrp {
+ fsl,pins = <
+ MX93_PAD_ENET1_MDC__GPIO4_IO00 0x31e
+ MX93_PAD_ENET1_MDIO__GPIO4_IO01 0x31e
+ MX93_PAD_ENET1_RD0__GPIO4_IO10 0x31e
+ MX93_PAD_ENET1_RD1__GPIO4_IO11 0x31e
+ MX93_PAD_ENET1_RD2__GPIO4_IO12 0x31e
+ MX93_PAD_ENET1_RD3__GPIO4_IO13 0x31e
+ MX93_PAD_ENET1_RXC__GPIO4_IO09 0x31e
+ MX93_PAD_ENET1_RX_CTL__GPIO4_IO08 0x31e
+ MX93_PAD_ENET1_TD0__GPIO4_IO05 0x31e
+ MX93_PAD_ENET1_TD1__GPIO4_IO04 0x31e
+ MX93_PAD_ENET1_TD2__GPIO4_IO03 0x31e
+ MX93_PAD_ENET1_TD3__GPIO4_IO02 0x31e
+ MX93_PAD_ENET1_TXC__GPIO4_IO07 0x31e
+ MX93_PAD_ENET1_TX_CTL__GPIO4_IO06 0x31e
+ >;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
+ MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c3_gpio: lpi2c3gpiogrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO28__GPIO2_IO28 0x40000b9e
+ MX93_PAD_GPIO_IO29__GPIO2_IO29 0x40000b9e
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x31e
+ MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e
+ MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x31e
+ MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x31e
+ MX93_PAD_I2C2_SDA__SAI1_RX_BCLK 0x31e
+ MX93_PAD_I2C2_SCL__SAI1_RX_SYNC 0x31e
+ MX93_PAD_UART2_RXD__SAI1_MCLK 0x31e
+ >;
+ };
+
+ pinctrl_sai1_sleep: sai1-sleepgrp {
+ fsl,pins = <
+ MX93_PAD_SAI1_TXC__GPIO1_IO12 0x31e
+ MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x31e
+ MX93_PAD_SAI1_TXD0__GPIO1_IO13 0x31e
+ MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x31e
+ MX93_PAD_UART2_RXD__GPIO1_IO06 0x31e
+ MX93_PAD_I2C2_SDA__GPIO1_IO03 0x31e
+ MX93_PAD_I2C2_SCL__GPIO1_IO02 0x31e
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e
+ MX93_PAD_DAP_TDI__LPUART5_RX 0x31e
+ MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e
+ MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x1582
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001382
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x40001382
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001382
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x40001382
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001382
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001382
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001382
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001382
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001382
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1582
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x158e
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000138e
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000138e
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000138e
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000138e
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000138e
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000138e
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000138e
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe
+ >;
+ };
+
+ pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__GPIO3_IO20 0x400
+ MX93_PAD_SD3_CMD__GPIO3_IO21 0x400
+ MX93_PAD_SD3_DATA0__GPIO3_IO22 0x400
+ MX93_PAD_SD3_DATA1__GPIO3_IO23 0x400
+ MX93_PAD_SD3_DATA2__GPIO3_IO24 0x400
+ MX93_PAD_SD3_DATA3__GPIO3_IO25 0x400
+ >;
+ };
+
+ pinctrl_usdhc3_wlan: usdhc3wlangrp {
+ fsl,pins = <
+ MX93_PAD_ENET2_MDC__GPIO4_IO14 0x51e
+ MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x51e
+ >;
+ };
+};
--
2.47.3
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v2 3/3] arm64: dts: imx93-var-dart: Add support for Variscite Sonata board
2026-03-27 9:08 [PATCH v2 0/3] Add support for Variscite DART-MX93 and Sonata board Stefano Radaelli
2026-03-27 9:08 ` [PATCH v2 1/3] dt-bindings: arm: fsl: add Variscite DART-MX93 Boards Stefano Radaelli
2026-03-27 9:08 ` [PATCH v2 2/3] arm64: dts: freescale: Add support for Variscite DART-MX93 Stefano Radaelli
@ 2026-03-27 9:08 ` Stefano Radaelli
2 siblings, 0 replies; 4+ messages in thread
From: Stefano Radaelli @ 2026-03-27 9:08 UTC (permalink / raw)
To: linux-kernel, devicetree, imx, linux-arm-kernel
Cc: pierluigi.p, Stefano Radaelli, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Frank Li, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, Shawn Guo, Dario Binacchi, Alexander Stein,
Maud Spierings, Josua Mayer, Markus Niebel, Primoz Fiser,
Francesco Dolcini
From: Stefano Radaelli <stefano.r@variscite.com>
Add device tree support for the Variscite Sonata carrier board with the
DART-MX93 system on module.
The Sonata board includes
- uSD Card support
- USB ports and OTG
- Additional Gigabit Ethernet interface
- Uart, SPI and I2C interfaces
- GPIO Expanders
- RTC module
- TPM module
- CAN peripherals
Link: https://variscite.com/carrier-boards/sonata-board/
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
-
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../dts/freescale/imx93-var-dart-sonata.dts | 654 ++++++++++++++++++
2 files changed, 655 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 2da6dc4f8a14..266eddd745c9 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -487,6 +487,7 @@ imx93-tqma9352-mba91xxca-rgb-cdtech-dc44-dtbs := imx93-tqma9352-mba91xxca.dtb im
dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba91xxca-lvds-tm070jvhg33.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba91xxca-rgb-cdtech-dc44.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-var-dart-sonata.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93w-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts b/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts
new file mode 100644
index 000000000000..5513d3b148a2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts
@@ -0,0 +1,654 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Variscite Sonata carrier board for DART-MX93
+ *
+ * Link: https://variscite.com/carrier-boards/sonata-board/
+ *
+ * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "imx93-var-dart.dtsi"
+
+/ {
+ model = "Variscite DART-MX93 on Sonata-Board";
+ compatible = "variscite,var-dart-mx93-sonata",
+ "variscite,var-dart-mx93",
+ "fsl,imx93";
+
+ aliases {
+ ethernet0 = &eqos;
+ ethernet1 = &fec;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ i2c0 = &lpi2c1;
+ i2c1 = &lpi2c2;
+ i2c2 = &lpi2c3;
+ i2c3 = &lpi2c4;
+ i2c4 = &lpi2c5;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ serial0 = &lpuart1;
+ serial1 = &lpuart2;
+ serial2 = &lpuart3;
+ serial3 = &lpuart4;
+ serial4 = &lpuart5;
+ serial5 = &lpuart6;
+ serial6 = &lpuart7;
+ };
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-home {
+ label = "Home";
+ linux,code = <KEY_HOME>;
+ gpios = <&pca6408_1 4 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button-up {
+ label = "Up";
+ linux,code = <KEY_UP>;
+ gpios = <&pca6408_1 5 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button-down {
+ label = "Down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&pca6408_1 6 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button-back {
+ label = "Back";
+ linux,code = <KEY_BACK>;
+ gpios = <&pca6408_1 7 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds_gpio>;
+
+ led-emmc {
+ gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ label = "eMMC";
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ clk40m: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ clock-output-names = "can_osc";
+ };
+
+ reg_vref_1v8: regulator-adc-vref {
+ compatible = "regulator-fixed";
+ regulator-name = "vref_1v8";
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ };
+
+ reg_usdhc2_vmmc: regulator-vmmc-usdhc2 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_SD2_3V3";
+ off-on-delay-us = <20000>;
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ pinctrl-names = "default";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ethosu_mem: ethosu-region@88000000 {
+ compatible = "shared-dma-pool";
+ reusable;
+ reg = <0x0 0x88000000 0x0 0x8000000>;
+ };
+
+ vdev0vring0: vdev0vring0@87ee0000 {
+ reg = <0 0x87ee0000 0 0x8000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@87ee8000 {
+ reg = <0 0x87ee8000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring0: vdev1vring0@87ef0000 {
+ reg = <0 0x87ef0000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring1: vdev1vring1@87ef8000 {
+ reg = <0 0x87ef8000 0 0x8000>;
+ no-map;
+ };
+
+ rsc_table: rsc-table@2021e000 {
+ reg = <0 0x2021e000 0 0x1000>;
+ no-map;
+ };
+
+ vdevbuffer: vdevbuffer@87f00000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x87f00000 0 0x100000>;
+ no-map;
+ };
+
+ ele_reserved: ele-reserved@87de0000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x87de0000 0 0x100000>;
+ no-map;
+ };
+ };
+};
+
+&adc1 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+/* Use external instead of internal RTC */
+&bbnsm_rtc {
+ status = "disabled";
+};
+
+&eqos {
+ mdio {
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ reset-assert-us = <15000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&pca6408_2 0 GPIO_ACTIVE_LOW>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+ };
+ };
+ };
+};
+
+ðphy0 {
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_fec>;
+ pinctrl-1 = <&pinctrl_fec_sleep>;
+ /*
+ * The required RGMII TX and RX 2ns delays are implemented directly
+ * in hardware via passive delay elements on the SOM PCB.
+ * No delay configuration is needed in software via PHY driver.
+ */
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+ status = "okay";
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&lpi2c1 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c1>;
+ pinctrl-1 = <&pinctrl_lpi2c1_gpio>;
+ pinctrl-2 = <&pinctrl_lpi2c1_gpio>;
+ pinctrl-names = "default", "sleep", "gpio";
+ scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ pca9534: gpio@22 {
+ compatible = "nxp,pca9534";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ /* Capacitive touch controller */
+ ft5x06_ts: touchscreen@38 {
+ compatible = "edt,edt-ft5206";
+ reg = <0x38>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-0 = <&pinctrl_captouch>;
+ pinctrl-names = "default";
+ reset-gpios = <&pca6408_2 4 GPIO_ACTIVE_LOW>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ wakeup-source;
+ };
+
+ /* USB Type-C Controller */
+ typec@3d {
+ compatible = "nxp,ptn5150";
+ reg = <0x3d>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&pinctrl_extcon>;
+ pinctrl-names = "default";
+
+ port {
+ typec1_dr_sw: endpoint {
+ remote-endpoint = <&usb1_drd_sw>;
+ };
+ };
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ wakeup-source;
+ };
+};
+
+&lpi2c5 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep", "gpio";
+ pinctrl-0 = <&pinctrl_lpi2c5>;
+ pinctrl-1 = <&pinctrl_lpi2c5_gpio>;
+ pinctrl-2 = <&pinctrl_lpi2c5_gpio>;
+ scl-gpios = <&gpio2 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio2 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&lpi2c7 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep", "gpio";
+ pinctrl-0 = <&pinctrl_lpi2c7>;
+ pinctrl-1 = <&pinctrl_lpi2c7_gpio>;
+ pinctrl-2 = <&pinctrl_lpi2c7_gpio>;
+ scl-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ pca6408_1: gpio@20 {
+ compatible = "nxp,pcal6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pca6408_2: gpio@21 {
+ compatible = "nxp,pcal6408";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ st33ktpm2xi2c: tpm@2e {
+ compatible = "st,st33ktpm2xi2c", "tcg,tpm-tis-i2c";
+ reg = <0x2e>;
+ };
+};
+
+&lpspi8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpspi8>;
+ cs-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ /* CAN controller */
+ can0: can@0 {
+ compatible = "microchip,mcp251xfd";
+ reg = <0>;
+ clocks = <&clk40m>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+/* Console (J10) */
+&lpuart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+/* Header (J12.4, J12.6) */
+&lpuart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ status = "okay";
+};
+
+/* Header (J12.11, J12.13) */
+&lpuart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart7>;
+ status = "okay";
+};
+
+&tpm3 {
+ pinctrl-0 = <&pinctrl_tpm3>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ usb-role-switch;
+ disable-over-current;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ status = "okay";
+
+ port {
+ usb1_drd_sw: endpoint {
+ remote-endpoint = <&typec1_dr_sw>;
+ };
+ };
+};
+
+&usbotg2 {
+ disable-over-current;
+ dr_mode = "host";
+ status = "okay";
+};
+
+/* SD */
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+ status = "okay";
+};
+
+&wdog3 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_can: cangrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO03__GPIO2_IO03 0x31e
+ >;
+ };
+
+ pinctrl_captouch: captouchgrp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e
+ >;
+ };
+
+ pinctrl_extcon: extcongrp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x31e
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e
+ MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e
+ MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e
+ MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x37e
+ MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x58e
+ MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e
+ MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e
+ MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e
+ MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e
+ MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e
+ MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e
+ MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e
+ >;
+ };
+
+ pinctrl_fec_sleep: fecsleepgrp {
+ fsl,pins = <
+ MX93_PAD_ENET2_RD0__GPIO4_IO24 0x51e
+ MX93_PAD_ENET2_RD1__GPIO4_IO25 0x51e
+ MX93_PAD_ENET2_RD2__GPIO4_IO26 0x51e
+ MX93_PAD_ENET2_RD3__GPIO4_IO27 0x51e
+ MX93_PAD_ENET2_RXC__GPIO4_IO23 0x51e
+ MX93_PAD_ENET2_RX_CTL__GPIO4_IO22 0x51e
+ MX93_PAD_ENET2_TD0__GPIO4_IO19 0x51e
+ MX93_PAD_ENET2_TD1__GPIO4_IO18 0x51e
+ MX93_PAD_ENET2_TD2__GPIO4_IO17 0x51e
+ MX93_PAD_ENET2_TD3__GPIO4_IO16 0x51e
+ MX93_PAD_ENET2_TXC__GPIO4_IO21 0x51e
+ MX93_PAD_ENET2_TX_CTL__GPIO4_IO20 0x51e
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX93_PAD_PDM_CLK__CAN1_TX 0x139e
+ MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* GPIO Expanders shared IRQ */
+ MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x31e
+ >;
+ };
+
+ pinctrl_leds_gpio: ledgrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO11__GPIO2_IO11 0x31e
+ >;
+ };
+
+ pinctrl_lpi2c1: lpi2c1grp {
+ fsl,pins = <
+ MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e
+ MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c1_gpio: lpi2c1-gpiogrp {
+ fsl,pins = <
+ MX93_PAD_I2C1_SCL__GPIO1_IO00 0x31e
+ MX93_PAD_I2C1_SDA__GPIO1_IO01 0x31e
+ >;
+ };
+
+ pinctrl_lpi2c5: lpi2c5grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e
+ MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c5_gpio: lpi2c5-gpiogrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO22__GPIO2_IO22 0x31e
+ MX93_PAD_GPIO_IO23__GPIO2_IO23 0x31e
+ >;
+ };
+
+ pinctrl_lpi2c7: lpi2c7grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO07__LPI2C7_SCL 0x40000b9e
+ MX93_PAD_GPIO_IO06__LPI2C7_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c7_gpio: lpi2c7-gpiogrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO07__GPIO2_IO07 0x31e
+ MX93_PAD_GPIO_IO06__GPIO2_IO06 0x31e
+ >;
+ };
+
+ pinctrl_lpspi8: lpspi8grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO00__GPIO2_IO00 0x31e
+ MX93_PAD_GPIO_IO01__GPIO2_IO01 0x31e
+ MX93_PAD_GPIO_IO12__GPIO2_IO12 0x31e
+ MX93_PAD_GPIO_IO13__LPSPI8_SIN 0x31e
+ MX93_PAD_GPIO_IO14__LPSPI8_SOUT 0x31e
+ MX93_PAD_GPIO_IO15__LPSPI8_SCK 0x31e
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO3__GPIO4_IO28 0x31e
+ >;
+ };
+
+ pinctrl_rtc: rtcgrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO02__GPIO2_IO02 0x31e
+ >;
+ };
+
+ pinctrl_tpm3: tpm3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO24__TPM3_CH3 0x51e
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
+ MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO05__LPUART6_RX 0x31e
+ MX93_PAD_GPIO_IO04__LPUART6_TX 0x31e
+ >;
+ };
+
+ pinctrl_uart7: uart7grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO09__LPUART7_RX 0x31e
+ MX93_PAD_GPIO_IO08__LPUART7_TX 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x1582
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x40001382
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001382
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001382
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001382
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x40001382
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
+ >;
+ };
+};
--
2.47.3
^ permalink raw reply related [flat|nested] 4+ messages in thread