From mboxrd@z Thu Jan  1 00:00:00 1970
From: matthias.bgg@gmail.com (Matthias Brugger)
Date: Fri, 9 Jun 2017 10:22:01 +0200
Subject: [PATCH 1/3] arm: dts: mt2701: Add ethernet device node
In-Reply-To: <1496297324-21091-2-git-send-email-erin.lo@mediatek.com>
References: <1496297324-21091-1-git-send-email-erin.lo@mediatek.com>
 <1496297324-21091-2-git-send-email-erin.lo@mediatek.com>
Message-ID: <d0a1217b-7761-fea6-888a-da06573400b8@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org



On 01/06/17 08:08, Erin Lo wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Add ethernet device node for MT2701
> 
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> Signed-off-by: Erin Lo <erin.lo@mediatek.com>
> ---
>   arch/arm/boot/dts/mt2701.dtsi | 20 ++++++++++++++++++++
>   1 file changed, 20 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
> index 8037210..de88bd7 100644
> --- a/arch/arm/boot/dts/mt2701.dtsi
> +++ b/arch/arm/boot/dts/mt2701.dtsi
> @@ -420,6 +420,26 @@
>   		#clock-cells = <1>;
>   	};
>   
> +	eth: ethernet at 1b100000 {
> +		compatible = "mediatek,mt2701-eth", "syscon";
> +		reg = <0 0x1b100000 0 0x20000>;
> +		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
> +			 <&ethsys CLK_ETHSYS_ESW>,
> +			 <&ethsys CLK_ETHSYS_GP1>,
> +			 <&ethsys CLK_ETHSYS_GP2>,
> +			 <&apmixedsys CLK_APMIXED_TRGPLL>;
> +		clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
> +		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
> +		mediatek,ethsys = <&ethsys>;
> +		mediatek,pctl = <&syscfg_pctl_a>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		status = "disabled";
> +	};
> +

I'm missing the reset properties.

Regards,
Matthias