[PATCH] ARM64: zynqmp: Fix i2c node's compatible string

[PATCH] ARM64: zynqmp: Fix i2c node's compatible string

[Moritz Fischer]

From: Moritz Fischer <mdf@kernel.org>

The Zynq Ultrascale MP uses version 1.4 of the Cadence IP core
which fixes some silicon bugs that needed software workarounds
in Version 1.0 that was used on Zynq systems.

Signed-off-by: Moritz Fischer <mdf@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: S?ren Brinkmann <soren.brinkmann@xilinx.com>
Cc: U-Boot List <u-boot@lists.denx.de>
Cc: Rob Herring <robh+dt@kernel.org>
---

Hi Michal,

I think this is a slip up and should be r1p14 for
Ultrascale ZynqMP. drivers/i2c/i2c-cadence.c already uses this.
I Cc'd the u-boot list, because the same change would be required there.

Cheers,

Moritz

---
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 68a90833..a5a5f91 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -175,7 +175,7 @@
 		};
 
 		i2c0: i2c at ff020000 {
-			compatible = "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 17 4>;
@@ -185,7 +185,7 @@
 		};
 
 		i2c1: i2c at ff030000 {
-			compatible = "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 18 4>;
-- 
2.4.11

[PATCH] ARM64: zynqmp: Fix i2c node's compatible string

[Michal Simek]

On 22.12.2016 06:49, Moritz Fischer wrote:
> From: Moritz Fischer <mdf@kernel.org>
> 
> The Zynq Ultrascale MP uses version 1.4 of the Cadence IP core
> which fixes some silicon bugs that needed software workarounds
> in Version 1.0 that was used on Zynq systems.
> 
> Signed-off-by: Moritz Fischer <mdf@kernel.org>
> Cc: Michal Simek <michal.simek@xilinx.com>
> Cc: S?ren Brinkmann <soren.brinkmann@xilinx.com>
> Cc: U-Boot List <u-boot@lists.denx.de>
> Cc: Rob Herring <robh+dt@kernel.org>
> ---
> 
> Hi Michal,
> 
> I think this is a slip up and should be r1p14 for
> Ultrascale ZynqMP. drivers/i2c/i2c-cadence.c already uses this.
> I Cc'd the u-boot list, because the same change would be required there.
> 
> Cheers,
> 
> Moritz
> 
> ---
>  arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 68a90833..a5a5f91 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -175,7 +175,7 @@
>  		};
>  
>  		i2c0: i2c at ff020000 {
> -			compatible = "cdns,i2c-r1p10";
> +			compatible = "cdns,i2c-r1p14";

I was checking this internally and p10 is doing something what p14
doesn't need to do. That's why this should be

compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";

The same of course for u-boot where also p14 should be added to the driver.

Thanks,
Michal

[PATCH] ARM64: zynqmp: Fix i2c node's compatible string

[Moritz Fischer]

Hi Michal,

On Wed, Dec 21, 2016 at 11:35 PM, Michal Simek <michal.simek@xilinx.com> wrote:

> compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";

I keep getting that wrong .. .damn ... :) Will resubmit.

> The same of course for u-boot where also p14 should be added to the driver.

Yeah, I realized that part after submitting...

Thanks