From mboxrd@z Thu Jan 1 00:00:00 1970 From: sricharan@codeaurora.org (Sricharan R) Date: Tue, 6 Feb 2018 10:14:29 +0530 Subject: [PATCH v6 15/15] dt-bindings: cpufreq: Document operating-points-v2-krait-cpu In-Reply-To: <20180206042729.GH28462@vireshk-i7> References: <1517890108-8140-1-git-send-email-sricharan@codeaurora.org> <1517890108-8140-16-git-send-email-sricharan@codeaurora.org> <20180206042729.GH28462@vireshk-i7> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Viresh, On 2/6/2018 9:57 AM, Viresh Kumar wrote: > On 06-02-18, 09:38, Sricharan R wrote: >> In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974 >> that has KRAIT processors the voltage/current value of each OPP >> varies based on the silicon variant in use. >> operating-points-v2-krait-cpu specifies the phandle to nvmem efuse cells >> and the operating-points-v2 table for each opp. The qcom-cpufreq driver >> reads the efuse value from the SoC to provide the required information >> that is used to determine the voltage and current value for each OPP of >> operating-points-v2 table when it is parsed by the OPP framework. >> >> Signed-off-by: Sricharan R >> --- >> .../devicetree/bindings/cpufreq/krait-cpufreq.txt | 363 +++++++++++++++++++++ >> 1 file changed, 363 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/cpufreq/krait-cpufreq.txt > > You can add my Ack if Rob also finds everything to be fine here. > > Acked-by: Viresh Kumar Thanks !! Regards, Sricharan -- "QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation