From: Ruslan Zalata <rz@fabmicro.ru>
To: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Guenter Roeck <linux@roeck-us.net>,
Jean Delvare <jdelvare@suse.com>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev
Subject: Re: [PATCH v2] hwmon: (sun4i-lradc) Add driver for LRADC found on Allwinner A13/A20 SoC
Date: Tue, 03 May 2022 04:20:03 +0500 [thread overview]
Message-ID: <d3d69373480f95ec7976055b7bb988a4@fabmicro.ru> (raw)
In-Reply-To: <20220429142412.00001e43@Huawei.com>
Hi Jonathan,
Thank you for pointing to DEFINE_SIMPLE_DEV_PM_OPS macros, will use it.
---
Regards,
Ruslan.
Fabmicro, LLC.
On 2022-04-29 18:24, Jonathan Cameron wrote:
> On Thu, 28 Apr 2022 14:30:06 -0700
> Guenter Roeck <linux@roeck-us.net> wrote:
>
>> On 4/28/22 14:09, Ruslan Zalata wrote:
>> > Some Allwinner SoCs like A13, A20 or T2 are equipped with two-channel
>> > low rate (6 bit) ADC that is often used for extra keys. There's a driver
>> > for that already implementing standard input device, but it has these
>> > limitations: 1) it cannot be used for general ADC data equisition, and
>>
>> acquisition
>>
>> > 2) it uses only one LRADC channel of two available.
>> >
>> > This driver provides basic hwmon interface to both channels of LRADC on
>> > such Allwinner SoCs.
>> >
>> > Signed-off-by: Ruslan Zalata <rz@fabmicro.ru>
>>
>> Ok, next phase of review.
>>
>
> One thing noticed whilst randomly glancing at this patch.
>
>
>> > +#ifdef CONFIG_PM
>> > +static int sun4i_lradc_resume(struct device *dev)
>> > +{
>> > + struct sun4i_lradc_data *lradc = dev_get_drvdata(dev);
>> > +
>> > + return sun4i_lradc_start(lradc);
>> > +}
>> > +
>> > +static int sun4i_lradc_suspend(struct device *dev)
>> > +{
>> > + struct sun4i_lradc_data *lradc = dev_get_drvdata(dev);
>> > +
>> > + sun4i_lradc_stop(lradc);
>> > + return 0;
>> > +}
>> > +
>> > +#define SUN4I_LRADC_DEV_PM_OPS (&sun4i_lradc_dev_pm_ops)
>> > +#else
>> > +#define SUN4I_LRADC_DEV_PM_OPS NULL
>> > +#endif /* CONFIG_PM */
>> > +
>> > +static const struct dev_pm_ops sun4i_lradc_dev_pm_ops = {
>
> We have much better infrastructure for this these days.
>
> Take a look at DEFINE_SIMPLE_DEV_PM_OPS()
> and pm_sleep_ptr()
>
> Those two in combination will let you get rid of all the ifdef stuff
> here by letting the compiler remove the unused code automatically.
>
>> > + .suspend = sun4i_lradc_suspend,
>> > + .resume = sun4i_lradc_resume,
>> > +};
>> > +
>> > +static const struct of_device_id sun4i_lradc_of_match[] = {
>> > + { .compatible = "allwinner,sun4i-a10-lradc-keys", .data = &variant_sun4i_a10_lradc},
>> > + { /* sentinel */ }
>> > +};
>> > +MODULE_DEVICE_TABLE(of, sun4i_lradc_of_match);
>> > +
>> > +static struct platform_driver sun4i_lradc_driver = {
>> > + .driver = {
>> > + .name = "sun4i-lradc-hwmon",
>> > + .of_match_table = of_match_ptr(sun4i_lradc_of_match),
>> > + .pm = SUN4I_LRADC_DEV_PM_OPS,
>> > + },
>> > + .probe = sun4i_lradc_probe,
>> > +};
>> > +
>> > +module_platform_driver(sun4i_lradc_driver);
>> > +
>> > +MODULE_DESCRIPTION("Allwinner A13/A20 LRADC hwmon driver");
>> > +MODULE_AUTHOR("Ruslan Zalata <rz@fabmicro.ru>");
>> > +MODULE_LICENSE("GPL");
>> > +No empty line at end, please
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-05-02 23:21 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20220428210906.29527-1-rz@fabmicro.ru>
2022-04-28 21:30 ` [PATCH v2] hwmon: (sun4i-lradc) Add driver for LRADC found on Allwinner A13/A20 SoC Guenter Roeck
2022-04-29 0:28 ` Ruslan Zalata
2022-04-29 5:32 ` Guenter Roeck
2022-04-29 6:03 ` Guenter Roeck
2022-05-02 23:47 ` Ruslan Zalata
2022-04-29 13:24 ` Jonathan Cameron
2022-05-02 23:20 ` Ruslan Zalata [this message]
2022-05-02 11:00 ` Maxime Ripard
2022-05-02 11:15 ` Icenowy Zheng
2022-05-02 11:21 ` Maxime Ripard
2022-05-03 2:02 ` Guenter Roeck
2022-05-03 15:26 ` Ruslan Zalata
2022-05-03 16:14 ` Maxime Ripard
2022-05-03 21:37 ` Ruslan Zalata
2022-05-04 14:12 ` Maxime Ripard
2022-05-02 13:31 ` Guenter Roeck
2022-05-02 13:39 ` Maxime Ripard
2022-05-02 16:21 ` Guenter Roeck
2022-05-03 8:50 ` Ruslan Zalata
2022-05-03 16:07 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d3d69373480f95ec7976055b7bb988a4@fabmicro.ru \
--to=rz@fabmicro.ru \
--cc=Jonathan.Cameron@huawei.com \
--cc=jdelvare@suse.com \
--cc=jernej.skrabec@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=linux@roeck-us.net \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).