From mboxrd@z Thu Jan  1 00:00:00 1970
From: narmstrong@baylibre.com (Neil Armstrong)
Date: Tue, 23 Aug 2016 10:09:26 +0200
Subject: [PATCH 02/13] scpi: Add alternative legacy structures and macros
In-Reply-To: <2b345fec-4dbd-2144-cd34-d8451bb314c0@arm.com>
References: <1471515066-3626-1-git-send-email-narmstrong@baylibre.com>
 <1471515066-3626-3-git-send-email-narmstrong@baylibre.com>
 <2b345fec-4dbd-2144-cd34-d8451bb314c0@arm.com>
Message-ID: <d6b03881-8afc-051d-6cab-01f95640526e@baylibre.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 08/18/2016 07:16 PM, Sudeep Holla wrote:
> 
> 
> On 18/08/16 11:10, Neil Armstrong wrote:
>> In order to support the legacy SCPI protocol variant, add back the structures
>> and macros that varies against the final specification.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> I checked against Amlogic implementation documentation and on-device, the channel selection
>> via legacy_scpi_get_chan() is needed and fails without it.
>> The sender_id is not needed so it was dropped.
>>
>>  drivers/firmware/arm_scpi.c | 84 +++++++++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 84 insertions(+)
>>
>> diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
>> index 403783a..0bb6134 100644
>> --- a/drivers/firmware/arm_scpi.c
>> +++ b/drivers/firmware/arm_scpi.c
> 
> [...]
> 
>> @@ -183,6 +224,11 @@ struct scpi_shared_mem {
>>      u8 payload[0];
>>  } __packed;
>>
>> +struct legacy_scpi_shared_mem {
>> +    __le32 status;
>> +    u8 payload[0];
>> +} __packed;
>> +
>>  struct scp_capabilities {
>>      __le32 protocol_version;
>>      __le32 event_version;
>> @@ -208,6 +254,12 @@ struct clk_set_value {
>>      __le32 rate;
>>  } __packed;
>>
>> +struct legacy_clk_set_value {
>> +    __le32 rate;
>> +    __le16 id;
>> +    __le16 reserved;
>> +} __packed;
>> +
>>  struct dvfs_info {
>>      __le32 header;
>>      struct {
>> @@ -237,6 +289,10 @@ struct sensor_value {
>>      __le32 hi_val;
>>  } __packed;
>>
>> +struct legacy_sensor_value {
>> +    __le32 val;
>> +} __packed;
>> +
> 
> Not required, new one is backward compatible. Otherwise this patch looks
> fine.

Indeed, will use the non-legacy structure.

Thanks,
Neil