From: nicolas.ferre@microchip.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/5] Add SoM1 support
Date: Thu, 6 Jul 2017 14:29:36 +0200 [thread overview]
Message-ID: <d8ce4321-90eb-06b3-bed4-50bf3885f58d@microchip.com> (raw)
In-Reply-To: <1499330129-29319-1-git-send-email-claudiu.beznea@microchip.com>
On 06/07/2017 at 10:35, Claudiu Beznea wrote:
> Hi all,
>
> This series adds support for sama5d2 SoM1 devices.
>
> The at91-sama5d27_som1.dtsi add specific bindings for SoM1 board.
> The at91-sama5d27_som1_ek.dts add specific bindings for SoM1 EK board.
>
> Thank you,
> Claudiu
You can add my:
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
for the whole series.
(I remember that we also had Ludovic's one as well).
Regards,
> Changes in v3:
> - remove qspi flash mapping for the moment
> - remove at24 and i2c bindings; this will be introduced when
> "Add at24 functionality to read form different EEPROM offsets" patch will
> be accepted
> - change the title of patch 5 from this series from
> "ARM: dts: sama5d27_som1_ek: Add sama5d27 SoM1 EK support" to
> "ARM: dts: at91: at91-sama5d27_som1_ek: Add sama5d27 SoM1 EK support" to
> match the desired prefix
>
> Changes in v2:
> o in at91-sama5d27_som1.dtsi:
> - increase bootloader and kernel size in flash map (with bootloader
> flash offset the dtb and kernel flash offsets were changed)
> - use right pin for ethernet-phy interrupt
>
> o in at91-sama5d27_som1_ek.dts:
> - removed memory tag and rely on bootloader to fill the right value
> - use pin macros (from arch/arm/boot/dts/sama5d2-pinfunc.h) wherever
> posible instead of pin numbers
> - remove pinctrl_sensor_power and pinctrl_sensor_reset pin muxing
> since they are not of intereset for this board
> - use "pb4" label for user button instead of "bp1"
>
> Claudiu Beznea (2):
> ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support
> ARM: dts: sama5d27_som1_ek: Add sama5d27 SoM1 EK support
>
> Cristian Birsan (1):
> drivers: soc: atmel: Add basic support for new sama5d2 SiPs
>
> Cyrille Pitchen (1):
> ARM: dts: at91: sama5d2: add QSPI nodes
>
> Songjun Wu (1):
> ARM: dts: at91: sama5d2: add isc node
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 178 +++++++++
> arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 551 ++++++++++++++++++++++++++++
> arch/arm/boot/dts/sama5d2.dtsi | 38 ++
> drivers/soc/atmel/soc.c | 8 +
> drivers/soc/atmel/soc.h | 4 +
> 6 files changed, 780 insertions(+)
> create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1.dtsi
> create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
>
--
Nicolas Ferre
next prev parent reply other threads:[~2017-07-06 12:29 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-06 8:35 [PATCH v3 0/5] Add SoM1 support Claudiu Beznea
2017-07-06 8:35 ` [PATCH v3 1/5] ARM: dts: at91: sama5d2: add QSPI nodes Claudiu Beznea
2017-07-06 8:35 ` [PATCH v3 2/5] ARM: dts: at91: sama5d2: add isc node Claudiu Beznea
2017-07-06 8:35 ` [PATCH v3 3/5] drivers: soc: atmel: Add basic support for new sama5d2 SiPs Claudiu Beznea
2017-07-06 8:35 ` [PATCH v3 4/5] ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support Claudiu Beznea
2017-07-06 8:35 ` [PATCH v3 5/5] ARM: dts: at91: at91-sama5d27_som1_ek: Add sama5d27 SoM1 EK support Claudiu Beznea
2017-07-06 12:29 ` Nicolas Ferre [this message]
2017-07-06 12:38 ` [PATCH v3 0/5] Add SoM1 support Ludovic Desroches
2017-07-17 9:13 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d8ce4321-90eb-06b3-bed4-50bf3885f58d@microchip.com \
--to=nicolas.ferre@microchip.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox