[PATCH] can: flexcan: add vf61x support for flexcan

[stefan@agner.ch (Stefan Agner)]

Hi Marc,

Am 2014-07-11 14:09, schrieb Marc Kleine-Budde:
> IMHO it should be 4 seperate patches:
> - dt
> - clocks
> - flexcan_get_berr_counter fixes
> - your flexcan enhancements

Ok, will split.

>> @@ -362,7 +374,7 @@
>>
>>  			esdhc1: esdhc at 400b2000 {
>>  				compatible = "fsl,imx53-esdhc";
>> -				reg = <0x400b2000 0x4000>;
>> +				reg = <0x400b2000 0x1000>;
> 
> What's that doing here? :)

That's an error I just stumbled upon. I know it's not related but it's
such a small change... Do I need to make a separate patch for that or
can I include it in the FlexCAN dt commit?

>> @@ -150,18 +171,20 @@
>>   * FLEXCAN hardware feature flags
>>   *
>>   * Below is some version info we got:
>> - *    SOC   Version   IP-Version  Glitch-  [TR]WRN_INT
>> - *                                Filter?   connected?
>> - *   MX25  FlexCAN2  03.00.00.00     no         no
>> - *   MX28  FlexCAN2  03.00.04.00    yes        yes
>> - *   MX35  FlexCAN2  03.00.00.00     no         no
>> - *   MX53  FlexCAN2  03.00.00.00    yes         no
>> - *   MX6s  FlexCAN3  10.00.12.00    yes        yes
>> + *    SOC   Version   IP-Version  Glitch-  [TR]WRN_INT  Memory err
>> + *                                Filter?   connected?  detection
>> + *   MX25  FlexCAN2  03.00.00.00     no         no	   no
>> + *   MX28  FlexCAN2  03.00.04.00    yes        yes	   no
>> + *   MX35  FlexCAN2  03.00.00.00     no         no	   no
>> + *   MX53  FlexCAN2  03.00.00.00    yes         no	   no
>> + *   MX6s  FlexCAN3  10.00.12.00    yes        yes	   no
>> + *   VFxx  FlexCAN3  ?		     no		no	  yes
> 
> Please use either tabs or space to indent in this table.

Ok, btw, do you know how I can obtain the IP version?

--
Stefan