From mboxrd@z Thu Jan 1 00:00:00 1970 From: jonathanh@nvidia.com (Jon Hunter) Date: Thu, 3 Nov 2016 13:45:04 +0000 Subject: [PATCH V3 1/6] clk: tegra: add TEGRA20_CLK_NOR to init table In-Reply-To: References: <1477576872-2665-1-git-send-email-mirza.krak@gmail.com> <1477576872-2665-2-git-send-email-mirza.krak@gmail.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 03/11/16 12:30, Mirza Krak wrote: > 2016-11-03 13:26 GMT+01:00 Mirza Krak : >> 2016-11-03 11:06 GMT+01:00 Jon Hunter : >>> Hi Mirza, >>> >>> On 27/10/16 15:01, Mirza Krak wrote: >>>> >>>> From: Mirza Krak >>>> >>>> Add TEGRA20_CLK_NOR to init table and set default rate to 92 MHz which >>>> is max rate. >>>> >>>> The maximum rate value of 92 MHz is pulled from the downstream L4T >>>> kernel. >>> >>> >>> Thanks for adding this. I assume that this is from an L4T r16 release with a >>> v3.1 kernel. I had a quick poke through the kernel sources for v3.1 but was >>> unable to see where this is set. Obviously v3.1 did not have CCF and so >>> everything seems to be in the arch/arm/mach-tegra directory for setting up >>> clocks. Can you point me to the appropriate sources so I can ACK this? >> >> I use the kernel sources provided by Toradex, and these sources are >> based on L4T r16 release. >> >> http://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/mach-tegra/tegra2_clocks.c?h=tegra#n2463 > > Ops, pre-mature send. > > I also added Marcel from Toradex on CC. > > The link to the source are [1] for Tegra2 and [2] for Tegra3. > > [1]. http://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/mach-tegra/tegra2_clocks.c?h=tegra#n2463 > [2]. http://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/mach-tegra/tegra3_clocks.c?h=tegra#n4353 Great. Yes I see the same. Thanks! Jon -- nvpublic