Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Arnd Bergmann" <arnd@arndb.de>
To: "Karl Mehltretter" <kmehltretter@gmail.com>,
	"Russell King" <linux@armlinux.org.uk>
Cc: "Linus Walleij" <linusw@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ARM: mm: compare ARM926 cache range sizes as unsigned
Date: Tue, 06 Oct 2026 11:06:29 +0200	[thread overview]
Message-ID: <dcc948ad-a718-4ee2-87d7-f4dc7536b4bc@app.fastmail.com> (raw)
In-Reply-To: <20261006055223.9299-1-kmehltretter@gmail.com>

On Tue, Oct 6, 2026, at 07:52, Karl Mehltretter wrote:
> arm926_flush_user_cache_range() uses BGT to compare end - start
> with CACHE_DLIMIT. Sizes of 2 GiB or more are treated as negative
> and take the cache-line loop instead of the whole-cache path.
>
> Use BHI for an unsigned comparison, keeping the line-by-line path
> at exactly CACHE_DLIMIT.
>
> With the default 3G/1G split, unmapping an untouched 2 GiB
> PROT_NONE mapping flushes the range through tlb_start_vma().
> On a SAM9X75 Curiosity board, munmap() took about 1.3 seconds
> unpatched and 20 ms patched.

Good catch!

> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
> Assisted-by: LLM
> Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>

Acked-by: Arnd Bergmann <arnd@arndb.de>
CC: stable@vger.kernel.org

> ---
> Based on v7.3-rc6. Tested on a Microchip EV31H43A SAM9X75 Curiosity
> LAN Kit with two kernels built from Linux4Microchip revision
> 8f2c610093aa3d5a7bd50a8d0597be4f0b7a3eda. The vendor function matches
> mainline.
>
> Both builds used Clang/LLD 22.1.3, the same DTB and an
> at91_dt_defconfig-derived config: ARM926T, MMU, CPU_CACHE_VIVT,
> VMSPLIT_3G, CPU_DCACHE_WRITETHROUGH=n. proc-arm926.o differs
> by one byte, the branch condition.
>
> An unprivileged test timed munmap() of untouched mappings made with
> mmap(PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS). Boot order was
> original, patched, original. Each cell is one munmap() call:
>
> Range              Original A1     Patched B     Original A2
> 16 KiB               0.0840 ms      0.0852 ms       0.0844 ms
> 20 KiB               0.0656 ms      0.0636 ms       0.0632 ms
> 1 GiB                9.7688 ms      9.7702 ms       9.7716 ms
> 2 GiB - 4 KiB       19.4054 ms     19.3928 ms      19.4066 ms
> 2 GiB             1323.2802 ms     19.6478 ms    1331.8680 ms
> 2 GiB + 4 KiB     1322.2016 ms     19.3972 ms    1322.2146 ms

I would suggest moving the extra text into the actual changelog,
as this seems useful information.

> ARM925, Feroceon and Mohawk have the same BGT but were not tested.
> Their fixes are left for a separate patch.

My feeling here would be that a single patch for all four
is best, since you have conclusively shown the solution to
be correct for one of them and it easily translates to the
others. I don't object to separate patches either, it just
seems more work for everyone.

       Arnd


  reply	other threads:[~2026-10-06  9:07 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-06  5:52 [PATCH] ARM: mm: compare ARM926 cache range sizes as unsigned Karl Mehltretter
2026-10-06  9:06 ` Arnd Bergmann [this message]
2026-10-06 10:15 ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=dcc948ad-a718-4ee2-87d7-f4dc7536b4bc@app.fastmail.com \
    --to=arnd@arndb.de \
    --cc=kmehltretter@gmail.com \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox