[PATCH v2 2/3] ARM: omap4: Correct definition of do_wfi() forCONFIG_THUMB2_KERNEL

[santosh.shilimkar@ti.com (Santosh Shilimkar)]

> -----Original Message-----
> From: Dave Martin [mailto:dave.martin at linaro.org]
> Sent: Wednesday, December 08, 2010 4:35 PM
> To: Santosh Shilimkar
> Cc: Tony Lindgren; linux-omap at vger.kernel.org; linaro-
> dev at lists.linaro.org; linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH v2 2/3] ARM: omap4: Correct definition of do_wfi()
> forCONFIG_THUMB2_KERNEL
>
> On Wed, Dec 8, 2010 at 10:45 AM, Santosh Shilimkar
> <santosh.shilimkar@ti.com> wrote:
> >> -----Original Message-----
> >> From: Dave Martin [mailto:dave.martin at linaro.org]
> >> Sent: Wednesday, December 08, 2010 4:11 PM
> >> To: Santosh Shilimkar
> >> Cc: linux-arm-kernel at lists.infradead.org; Tony Lindgren; linux-
> >> omap at vger.kernel.org; linaro-dev at lists.linaro.org
> >> Subject: Re: [PATCH v2 2/3] ARM: omap4: Correct definition of
do_wfi()
> >> forCONFIG_THUMB2_KERNEL
> >>
> >> On Wed, Dec 8, 2010 at 5:59 AM, Santosh Shilimkar
> >> <santosh.shilimkar@ti.com> wrote:
> >> > Dave,
> >> >
> >> >> -----Original Message-----
> >> >> From: Santosh Shilimkar [mailto:santosh.shilimkar at ti.com]
> >> >> Sent: Wednesday, December 08, 2010 11:27 AM
> >> >> To: Dave Martin
> >> >> Cc: linux-arm-kernel at lists.infradead.org; Tony Lindgren; linux-
> >> >> omap at vger.kernel.org; linaro-dev at lists.linaro.org
> >> >> Subject: RE: [PATCH v2 2/3] ARM: omap4: Correct definition of
> > do_wfi()
> >> >> forCONFIG_THUMB2_KERNEL
> >> >>
> >> >> > -----Original Message-----
> >> >> > From: Dave Martin [mailto:dave.martin at linaro.org]
> >> >> > Sent: Tuesday, December 07, 2010 10:21 PM
> >> >> > To: Santosh Shilimkar
> >> >> > Cc: linux-arm-kernel at lists.infradead.org; Tony Lindgren; linux-
> >> >> > omap at vger.kernel.org; linaro-dev at lists.linaro.org
> >> >> > Subject: Re: [PATCH v2 2/3] ARM: omap4: Correct definition of
> >> do_wfi()
> >> >> > forCONFIG_THUMB2_KERNEL
> >> >> >
> >> >> > Hi,
> >> >> >
> >> >> > On Tue, Dec 7, 2010 at 6:28 AM, Santosh Shilimkar
> >> >> > <santosh.shilimkar@ti.com> wrote:
> >> >> > > Dave,
> >> >
> >> > [.....]
> >> >>
> >> >> > So anything inside #ifdef CONFIG_THUMB2_KERNEL can assume
> > v7/Thumb-2
> >> >> > capable (and hence reasonably new) tools.
> >> >> >
> >> >> > I'll follow up shortly with a patch to the generic ARM Kconfig
to
> >> make
> >> >> > this explicit, so that ARCH_OMAP2 and THUMB2_KERNEL can't
> >> accidentally
> >> >> > be configured together.
> >> >> >
> >> >> sure
> >> >
> >> > When you are doing the changes can you please check if you could
> build
> >> > the THUMB2 kernel with omap2plus_defconfig. I suspect the build
will
> >> > fail.
> >>
> >> With my Kconfig patch, kconfig won't let you turn on Thumb-2 in that
> >> configuration:
> >>
> >>
> >
>
http://lists.arm.linux.org.uk/lurker/message/20101207.165737.0897658f.en.h
> >> tml
> >>
> >> If you want to turn on Thumb-2, you must disable ARCH_OMAP2 first.
?If
> >> my understanding is correct, this is the right behaviour.
> >>
> >>
> > Ofcourse it will build with ARCH_OMAP2 disabled :) (ARMv6 dependency)
> > In other words, I wanted to say that "omap2plus_defconfig" can't
> > be used as is to build THUMB kernel binary.
>
> Well, yes, that's another way of looking at it.  Anyway, I think this
> is the intended result -- is it OK for you?
>
Should be ok considering you can't do much with it. But I let Tony comment
on it.

Regards,
Santosh