public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Akihiko Odaki <akihiko.odaki@daynix.com>
To: Oliver Upton <oliver.upton@linux.dev>
Cc: Mark Brown <broonie@kernel.org>, Marc Zyngier <maz@kernel.org>,
	linux-kernel@vger.kernel.org, kvmarm@lists.linux.dev,
	kvmarm@lists.cs.columbia.edu,
	linux-arm-kernel@lists.infradead.org,
	Mathieu Poirier <mathieu.poirier@linaro.org>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Alexandru Elisei <alexandru.elisei@arm.com>,
	James Morse <james.morse@arm.com>, Will Deacon <will@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	asahi@lists.linux.dev, Alyssa Rosenzweig <alyssa@rosenzweig.io>,
	Sven Peter <sven@svenpeter.dev>, Hector Martin <marcan@marcan.st>
Subject: Re: [PATCH v5 7/7] KVM: arm64: Normalize cache configuration
Date: Sat, 7 Jan 2023 19:04:03 +0900	[thread overview]
Message-ID: <df1f5846-dcfe-5b60-bfe3-54d93698831d@daynix.com> (raw)
In-Reply-To: <Y7c3AZJhlxKcc7y2@google.com>

On 2023/01/06 5:45, Oliver Upton wrote:
> Hi Akihiko,
> 
> On Fri, Dec 30, 2022 at 06:54:52PM +0900, Akihiko Odaki wrote:
> 
> [...]
> 
>> @@ -417,6 +418,9 @@ struct kvm_vcpu_arch {
>>   		u64 last_steal;
>>   		gpa_t base;
>>   	} steal;
>> +
>> +	/* Per-vcpu CCSIDR override or NULL */
>> +	u32 *ccsidr;
> 
> I don't believe we need to store this per-vCPU. Of course, it is
> possible to userspace to observe heterogeneous cache topologies
> depending on what core the KVM_GET_ONE_REG ioctl is handled on.
> 
> WDYT about keeping track of this per-VM? The value should be whatever
> was last written by userspace. To avoid breaking userspace this would
> also need to allow mismatched writes (i.e. vCPU0 has a different
> configuration than vCPU1).
A user would expect KVM_SET_ONE_REG will be per-VM so semantically it 
should be per-VM. Also, it should be noted that this change is to allow 
migration from older kernels; an older kernel can set different values 
for CCSIDR if the host has heterogeneous cache though I think nobody 
with big.LITTLE system wants to migrate VMs.

If you care only practicality but semantics, probably you can just 
ignore writes to CCSIDR from the userspace. I don't think any guest will 
care even if CCSIDR values change after migration. Either way is fine 
for me.

> 
> [...]
> 
>> +static u8 get_min_cache_line_size(u32 csselr)
> 
> It would be nice to have a comment indicating that it returns
> Log2(line_size), not line size outright.
> 
>> +{
>> +	u64 ctr_el0;
>> +	int field;
>> +
>> +	ctr_el0 = read_sanitised_ftr_reg(SYS_CTR_EL0);
>> +	field = csselr & CSSELR_EL1_InD ? CTR_EL0_IminLine_SHIFT : CTR_EL0_DminLine_SHIFT;
>> +
>> +	return cpuid_feature_extract_unsigned_field(ctr_el0, field) - 2;
> 
> This probably deserves a comment describing that CTR_EL0 represents line
> size in units of words, not bytes. Furthermore, a subtle reminder on the
> log transformation being done here would help also.
> 
>> +}
>> +
>>   /* Which cache CCSIDR represents depends on CSSELR value. */
>> -static u32 get_ccsidr(u32 csselr)
>> +static u32 get_ccsidr(struct kvm_vcpu *vcpu, u32 csselr)
>>   {
>> -	u32 ccsidr;
>> +	if (vcpu->arch.ccsidr)
>> +		return vcpu->arch.ccsidr[csselr];
>>   
>> -	/* Make sure noone else changes CSSELR during this! */
>> -	local_irq_disable();
>> -	write_sysreg(csselr, csselr_el1);
>> -	isb();
>> -	ccsidr = read_sysreg(ccsidr_el1);
>> -	local_irq_enable();
>> +	/*
>> +	 * Fabricate a CCSIDR value as the overriding value does not exist.
>> +	 * The real CCSIDR value will not be used as it can vary by the
>> +	 * physical CPU which the vcpu currently resides in.
>> +	 *
>> +	 * The line size is determined with get_min_cache_line_size(), which
>> +	 * should be valid for all CPUs even if they have different cache
>> +	 * configuration.
>> +	 *
>> +	 * The associativity bits are cleared, meaning the geometry of all data
>> +	 * and unified caches (which are guaranteed to be PIPT and thus
>> +	 * non-aliasing) are 1 set and 1 way.
>> +	 * Guests should not be doing cache operations by set/way at all, and
>> +	 * for this reason, we trap them and attempt to infer the intent, so
>> +	 * that we can flush the entire guest's address space at the appropriate
>> +	 * time. The exposed geometry minimizes the number of the traps.
>> +	 * [If guests should attempt to infer aliasing properties from the
>> +	 * geometry (which is not permitted by the architecture), they would
>> +	 * only do so for virtually indexed caches.]
>> +	 *
>> +	 * We don't check if the cache level exists as it is allowed to return
>> +	 * an UNKNOWN value if not.
>> +	 */
>> +	return get_min_cache_line_size(csselr) << CCSIDR_EL1_LineSize_SHIFT;
> 
> I don't believe this is correct. The value of CCSIDR_EL1.LineSize is
> actually:
> 
>     Log2(Number of bytes in cache line) - 4 (from DDI0487I.a D17.2.26)
> 
> 
> With that, I'd expect the following instead:
> 
> 	line_size = get_min_cache_line_size(csselr);
> 	return FIELD_PREP(CCSIDR_EL1_LineSize_MASK, line_size - 4);
> 
> --
> Thanks,
> Oliver

I added a comment to get_min_cache_line_size() with v6. Hopefully it 
will clarify the intention.

Regards,
Akihiko Odaki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

      reply	other threads:[~2023-01-07 10:05 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-30  9:54 [PATCH v5 0/7] KVM: arm64: Normalize cache configuration Akihiko Odaki
2022-12-30  9:54 ` [PATCH v5 1/7] arm64: Allow the definition of UNKNOWN system register fields Akihiko Odaki
2022-12-30  9:54 ` [PATCH v5 2/7] arm64/sysreg: Convert CCSIDR_EL1 to automatic generation Akihiko Odaki
2022-12-30  9:54 ` [PATCH v5 3/7] arm64/sysreg: Add CCSIDR2_EL1 Akihiko Odaki
2022-12-30  9:54 ` [PATCH v5 4/7] arm64/cache: Move CLIDR macro definitions Akihiko Odaki
2022-12-30  9:54 ` [PATCH v5 5/7] KVM: arm64: Always set HCR_TID2 Akihiko Odaki
2023-01-06  4:29   ` Reiji Watanabe
2022-12-30  9:54 ` [PATCH v5 6/7] KVM: arm64: Mask FEAT_CCIDX Akihiko Odaki
2023-01-05 22:22   ` Oliver Upton
2023-01-07  9:53     ` Akihiko Odaki
2023-01-08 18:54       ` Oliver Upton
2022-12-30  9:54 ` [PATCH v5 7/7] KVM: arm64: Normalize cache configuration Akihiko Odaki
2023-01-05 20:45   ` Oliver Upton
2023-01-07 10:04     ` Akihiko Odaki [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=df1f5846-dcfe-5b60-bfe3-54d93698831d@daynix.com \
    --to=akihiko.odaki@daynix.com \
    --cc=alexandru.elisei@arm.com \
    --cc=alyssa@rosenzweig.io \
    --cc=asahi@lists.linux.dev \
    --cc=broonie@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=james.morse@arm.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcan@marcan.st \
    --cc=mathieu.poirier@linaro.org \
    --cc=maz@kernel.org \
    --cc=oliver.upton@linux.dev \
    --cc=suzuki.poulose@arm.com \
    --cc=sven@svenpeter.dev \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox