From mboxrd@z Thu Jan 1 00:00:00 1970 From: nicolas.ferre@microchip.com (Nicolas Ferre) Date: Mon, 5 Feb 2018 13:36:02 +0100 Subject: [PATCH] [PATCH] tty/serial: atmel: add new version check for usart In-Reply-To: <20180129113954.12011-1-jonas@orbital-systems.com> References: <20180129113954.12011-1-jonas@orbital-systems.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 29/01/2018 at 12:39, Jonas Danielsson wrote: > On our at91sam9260 based board the usart0 and usart1 ports report > their versions (ATMEL_US_VERSION) as 0x10302. This version is not > included in the current checks in the driver. > > Signed-off-by: Jonas Danielsson Acked-by: Nicolas Ferre It must be the AT91SAM9260 rev. B SoC, isn't it? Thanks for your patch. Best regards, Nicolas > --- > drivers/tty/serial/atmel_serial.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c > index efa25611ca0c..ae9f1dcbf3fc 100644 > --- a/drivers/tty/serial/atmel_serial.c > +++ b/drivers/tty/serial/atmel_serial.c > @@ -1734,6 +1734,7 @@ static void atmel_get_ip_name(struct uart_port *port) > switch (version) { > case 0x302: > case 0x10213: > + case 0x10302: > dev_dbg(port->dev, "This version is usart\n"); > atmel_port->has_frac_baudrate = true; > atmel_port->has_hw_timer = true; > -- Nicolas Ferre