From mboxrd@z Thu Jan 1 00:00:00 1970 From: alexandre.torgue@st.com (Alexandre Torgue) Date: Tue, 13 Nov 2018 09:09:48 +0100 Subject: [PATCH v3 0/4] Add support of STM32 hwspinlock In-Reply-To: <20181112152342.6561-1-benjamin.gaignard@st.com> References: <20181112152342.6561-1-benjamin.gaignard@st.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Benjamin On 11/12/18 4:23 PM, Benjamin Gaignard wrote: > This serie adds the support of the hardware semaphore block for stm32mp1 SoC. > > version 3: > - fix clock name in properties description. > - use postcore_initcall() instead of module_platform_driver() > > version 2: > - fix comments done by Bjorn about clock naming, license terms in header, > alphabetic ordering in Makefile and Kconfig and remove function > - Do not push test module in this version while waiting for feedbacks about it > > > Benjamin Gaignard (4): > dt-bindings: hwlock: Document STM32 hwspinlock bindings > hwspinlock: add STM32 hwspinlock device > ARM: dts: stm32: Add hwspinlock node for stm32mp157 SoC > ARM: dts: stm32: enable hwspinlock on stm32mp157c-ed1 DT patches applied on stm32-next. Regards Alex > > .../bindings/hwlock/st,stm32-hwspinlock.txt | 23 +++ > arch/arm/boot/dts/stm32mp157c-ed1.dts | 4 + > arch/arm/boot/dts/stm32mp157c.dtsi | 9 ++ > drivers/hwspinlock/Kconfig | 9 ++ > drivers/hwspinlock/Makefile | 1 + > drivers/hwspinlock/stm32_hwspinlock.c | 156 +++++++++++++++++++++ > 6 files changed, 202 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt > create mode 100644 drivers/hwspinlock/stm32_hwspinlock.c >