From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] arm64: dts: renesas: r8a77980: add I2C support
Date: Thu, 31 May 2018 23:22:39 +0300 [thread overview]
Message-ID: <e2b58145-bdcc-758e-75da-b079543cfe80@cogentembedded.com> (raw)
In-Reply-To: <2a88f4e9-0a86-8e6f-0ef2-20913dc9431d@cogentembedded.com>
Define the generic R8A77980 parts of the I2C[0-5] device nodes.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Changes in version 2:
- removed the DMA props for I2C3/4;
- fixed a typo in the patch description;
- added Geert's tag.
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 105 ++++++++++++++++++++++++++++++
1 file changed, 105 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -16,6 +16,15 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -135,6 +144,102 @@
#power-domain-cells = <1>;
};
+ i2c0: i2c at e6500000 {
+ compatible = "renesas,i2c-r8a77980",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
+ dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+ <&dmac2 0x91>, <&dmac2 0x90>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at e6508000 {
+ compatible = "renesas,i2c-r8a77980",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
+ dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+ <&dmac2 0x93>, <&dmac2 0x92>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at e6510000 {
+ compatible = "renesas,i2c-r8a77980",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
+ dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+ <&dmac2 0x95>, <&dmac2 0x94>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c at e66d0000 {
+ compatible = "renesas,i2c-r8a77980",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
+ i2c-scl-internal-delay-ns = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c at e66d8000 {
+ compatible = "renesas,i2c-r8a77980",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
+ i2c-scl-internal-delay-ns = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c at e66e0000 {
+ compatible = "renesas,i2c-r8a77980",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ dmas = <&dmac1 0x9b>, <&dmac1 0x9a>,
+ <&dmac2 0x9b>, <&dmac2 0x9a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
hscif0: serial at e6540000 {
compatible = "renesas,hscif-r8a77980",
"renesas,rcar-gen3-hscif",
next prev parent reply other threads:[~2018-05-31 20:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-31 20:18 [PATCH v2 0/2] Add R8A77980/Condor I2C support Sergei Shtylyov
2018-05-31 20:22 ` Sergei Shtylyov [this message]
2018-05-31 20:26 ` [PATCH v2 2/2] arm64: dts: renesas: condor: add I2C0 support Sergei Shtylyov
2018-06-04 9:46 ` [PATCH v2 0/2] Add R8A77980/Condor I2C support Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e2b58145-bdcc-758e-75da-b079543cfe80@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox