From mboxrd@z Thu Jan 1 00:00:00 1970 From: embed3d@gmail.com (Philipp Rossak) Date: Mon, 29 Jan 2018 12:56:38 +0100 Subject: [PATCH v2 13/16] arm: dts: sun8i: h3: add thermal zone to H3 In-Reply-To: <20180129095034.5crx7ydq5k6f7omv@flea.lan> References: <20180128232919.12639-1-embed3d@gmail.com> <20180128232919.12639-14-embed3d@gmail.com> <20180129095034.5crx7ydq5k6f7omv@flea.lan> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 29.01.2018 10:50, Maxime Ripard wrote: > On Mon, Jan 29, 2018 at 12:29:16AM +0100, Philipp Rossak wrote: >> This patch adds the thermal zones to the H3. We have only one sensor and >> that is placed in the cpu. >> >> Signed-off-by: Philipp Rossak >> --- >> arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++ >> 1 file changed, 9 insertions(+) >> >> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi >> index fbb007e5798e..3f83f6a27c74 100644 >> --- a/arch/arm/boot/dts/sun8i-h3.dtsi >> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi >> @@ -72,6 +72,15 @@ >> }; >> }; >> >> + thermal-zones { >> + cpu-thermal { >> + /* milliseconds */ >> + polling-delay-passive = <250>; >> + polling-delay = <1000>; >> + thermal-sensors = <&ths 0>; > > if the thermal-sensor-cells value is indeed 0, the phandle parsing > will be broken here. > > Maxime > Ok, then I will remove the 0. Thanks, Philipp