From mboxrd@z Thu Jan 1 00:00:00 1970 From: f.fainelli@gmail.com (Florian Fainelli) Date: Wed, 6 Jun 2018 12:29:06 -0700 Subject: [PATCH v4 0/6] Enhance support for the SP805 WDT In-Reply-To: <1527530497-10392-1-git-send-email-ray.jui@broadcom.com> References: <1527530497-10392-1-git-send-email-ray.jui@broadcom.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 05/28/2018 11:01 AM, Ray Jui wrote: > This patch series enhances the support for the SP805 watchdog timer. > First of all, 'timeout-sec' devicetree property is added. In addition, > support is also added to allow the driver to reset the watchdog if it > has been detected that watchdot has been started in the bootloader. In > this case, the driver will initiate the ping service from the kernel > watchdog subsystem, before a user mode daemon takes over. This series > also enables SP805 in the default ARM64 defconfig > > This patch series is based off v4.17-rc5 and is available on GIHUB: > repo: https://github.com/Broadcom/arm64-linux.git > branch: sp805-wdt-v4 > > Changes since v3: > - Improve description of 'timeout-sec' in the binding document, per > recommendation from Guenter Roeck > > Changes since v2: > - Fix indent and format to make them consistent within arm,sp805.txt > > Changes since v1: > - Consolidate two duplicated SP805 binding documents into one > - Slight change of the wdt_is_running implementation per discussion > > Ray Jui (6): > Documentation: DT: Consolidate SP805 binding docs > Documentation: DT: Add optional 'timeout-sec' property for sp805 > watchdog: sp805: add 'timeout-sec' DT property support > watchdog: sp805: set WDOG_HW_RUNNING when appropriate > arm64: dt: set initial SR watchdog timeout to 60 seconds > arm64: defconfig: add CONFIG_ARM_SP805_WATCHDOG I can take the last two patches and Guenter would take the first 4 or would you want to proceed differently? -- Florian