From: "Walter Chang (張維哲)" <Walter.Chang@mediatek.com>
To: "tglx@linutronix.de" <tglx@linutronix.de>,
"daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org>,
"matthias.bgg@gmail.com" <matthias.bgg@gmail.com>,
"krzysztof.kozlowski@linaro.org" <krzysztof.kozlowski@linaro.org>,
"angelogioacchino.delregno@collabora.com"
<angelogioacchino.delregno@collabora.com>,
"jstultz@google.com" <jstultz@google.com>,
"macro@orcam.me.uk" <macro@orcam.me.uk>
Cc: "linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
wsd_upstream <wsd_upstream@mediatek.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"Stanley Chu (朱原陞)" <stanley.chu@mediatek.com>,
"Freddy Hsin (辛恒豐)" <Freddy.Hsin@mediatek.com>,
"linux-mediatek@lists.infradead.org"
<linux-mediatek@lists.infradead.org>,
"Chun-Hung Wu (巫駿宏)" <Chun-hung.Wu@mediatek.com>
Subject: Re: [PATCH] clocksource/drivers/timer-mediatek: Make timer-mediatek become loadable module
Date: Tue, 14 Feb 2023 11:06:07 +0000 [thread overview]
Message-ID: <e533bd12816ec5f1184fcf138f644f7719def962.camel@mediatek.com> (raw)
In-Reply-To: <f2d66681-a7b6-2369-b9f7-f886f8ea6ae5@linaro.org>
On Fri, 2023-02-10 at 11:07 +0100, Krzysztof Kozlowski wrote:
> On 10/02/2023 11:00, walter.chang@mediatek.com wrote:
> > From: Chun-Hung Wu <chun-hung.wu@mediatek.com>
> >
> > This patch makes the timer-mediatek driver which can
>
> Do not use "This commit/patch".
>
https://urldefense.com/v3/__https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst*L95__;Iw!!CTRNKA9wMg0ARbw!g1yigOO6iIpjlr82Ud0dn1yVP_1yqSfLWJ-1GFC7O88n7l7lrb9SlYAw5KHzA3339zyiV-s72Wn_OZrARjlaY0RMmdnOUyQ$
>
>
> > register an always-on timer as tick_broadcast_device
> > on MediaTek SoCs become loadable module in GKI.
>
> Are you planning to answer other parts of that discussion? IOW, does
> the
> system boot fine? What's the impact of this being a module?
>
> >
> > This patch depends on the previous patch.
> >
https://lore.kernel.org/lkml/20230208094813.20874-1-walter.chang@mediatek.com/T/#t
>
> This does not belong to commit msg. What's the point of keeping it in
> commit history forever?
>
> >
> > Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
> > ---
> > drivers/clocksource/Kconfig | 2 +-
> > drivers/clocksource/timer-mediatek.c | 43
> > ++++++++++++++++++++++++++++
> > 2 files changed, 44 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/clocksource/Kconfig
> > b/drivers/clocksource/Kconfig
> > index 4469e7f555e9..41345827055b 100644
> > --- a/drivers/clocksource/Kconfig
> > +++ b/drivers/clocksource/Kconfig
> > @@ -472,7 +472,7 @@ config SYS_SUPPORTS_SH_CMT
> > bool
> >
> > config MTK_TIMER
> > - bool "Mediatek timer driver" if COMPILE_TEST
> > + tristate "Mediatek timer driver"
> > depends on HAS_IOMEM
> > select TIMER_OF
> > select CLKSRC_MMIO
> > diff --git a/drivers/clocksource/timer-mediatek.c
> > b/drivers/clocksource/timer-mediatek.c
> > index d5b29fd03ca2..806044ef391c 100644
> > --- a/drivers/clocksource/timer-mediatek.c
> > +++ b/drivers/clocksource/timer-mediatek.c
> > @@ -13,6 +13,9 @@
> > #include <linux/clocksource.h>
> > #include <linux/interrupt.h>
> > #include <linux/irqreturn.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > #include <linux/sched_clock.h>
> > #include <linux/slab.h>
> > #include "timer-of.h"
> > @@ -450,6 +453,46 @@ static int __init mtk_gpt_init(struct
> > device_node *node)
> >
> > return 0;
> > }
> > +
> > +#ifdef MODULE
> > +static int mtk_timer_probe(struct platform_device *pdev)
> > +{
> > + int (*timer_init)(struct device_node *node);
> > + struct device_node *np = pdev->dev.of_node;
> > +
> > + timer_init = of_device_get_match_data(&pdev->dev);
> > + return timer_init(np);
> > +}
> > +
> > +static const struct of_device_id mtk_timer_match_table[] = {
> > + {
> > + .compatible = "mediatek,mt6577-timer",
> > + .data = mtk_gpt_init,
> > + },
> > + {
> > + .compatible = "mediatek,mt6765-timer",
> > + .data = mtk_syst_init,
> > + },
> > + {
> > + .compatible = "mediatek,mt6795-systimer",
> > + .data = mtk_cpux_init,
> > + },
> > + {}
> > +};
> > +
> > +static struct platform_driver mtk_timer_driver = {
> > + .probe = mtk_timer_probe,
> > + .driver = {
> > + .name = "mtk-timer",
> > + .of_match_table = mtk_timer_match_table,
> > + },
> > +};
> > +MODULE_DESCRIPTION("MEDIATEK Module Timer driver");
> > +MODULE_LICENSE("GPL v2");
>
> I don't think you run checkpatch before sending... please do not use
> humans for review which is done by automatic tools.
>
> > +
> > +module_platform_driver(mtk_timer_driver);
>
> Follow coding convention like in very other driver, so this goes
> immediately after definition of driver structure.
>
> > +#else
>
>
> Best regards,
> Krzysztof
>
Thanks for pointing out the mistake. I have fixed it and submitted
patch v2, which merged the driver and export functions in the same
patch.
https://lore.kernel.org/lkml/20230214105412.5856-1-walter.chang@mediatek.com/T/#t
Thanks,
Walter Chang
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-02-14 11:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-10 10:00 [PATCH] clocksource/drivers/timer-mediatek: Make timer-mediatek become loadable module walter.chang
2023-02-10 10:07 ` Krzysztof Kozlowski
2023-02-14 11:06 ` Walter Chang (張維哲) [this message]
2023-02-14 11:09 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e533bd12816ec5f1184fcf138f644f7719def962.camel@mediatek.com \
--to=walter.chang@mediatek.com \
--cc=Chun-hung.Wu@mediatek.com \
--cc=Freddy.Hsin@mediatek.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=daniel.lezcano@linaro.org \
--cc=jstultz@google.com \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=macro@orcam.me.uk \
--cc=matthias.bgg@gmail.com \
--cc=stanley.chu@mediatek.com \
--cc=tglx@linutronix.de \
--cc=wsd_upstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox