[PATCH 1/6] clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469 boards

[gabriel.fernandez@st.com (Gabriel Fernandez)]

On 11/09/2016 09:10 AM, Rados?aw Pietrzyk wrote:
> I would expect that VCO clock will force recalculation for all its
> children if I am not mistaken.
Sure

BR
Gabriel.
>
> 2016-11-08 17:19 GMT+01:00 Gabriel Fernandez <gabriel.fernandez@st.com>:
>> On 11/08/2016 09:52 AM, Rados?aw Pietrzyk wrote:
>>> 2016-11-08 9:35 GMT+01:00 Gabriel Fernandez <gabriel.fernandez@st.com>:
>>>> Hi Rados?aw
>>>>
>>>> Many thanks for reviewing.
>>>>
>>>> On 11/07/2016 03:57 PM, Rados?aw Pietrzyk wrote:
>>>>>> +static struct clk_hw *clk_register_pll_div(const char *name,
>>>>>> +               const char *parent_name, unsigned long flags,
>>>>>> +               void __iomem *reg, u8 shift, u8 width,
>>>>>> +               u8 clk_divider_flags, const struct clk_div_table
>>>>>> *table,
>>>>>> +               struct clk_hw *pll_hw, spinlock_t *lock)
>>>>>> +{
>>>>>> +       struct stm32f4_pll_div *pll_div;
>>>>>> +       struct clk_hw *hw;
>>>>>> +       struct clk_init_data init;
>>>>>> +       int ret;
>>>>>> +
>>>>>> +       /* allocate the divider */
>>>>>> +       pll_div = kzalloc(sizeof(*pll_div), GFP_KERNEL);
>>>>>> +       if (!pll_div)
>>>>>> +               return ERR_PTR(-ENOMEM);
>>>>>> +
>>>>>> +       init.name = name;
>>>>>> +       init.ops = &stm32f4_pll_div_ops;
>>>>>> +       init.flags = flags;
>>>>> Maybe it's worth to have CLK_SET_RATE_PARENT here and the VCO clock
>>>>> should have CLK_SET_RATE_GATE flag and we can get rid of custom
>>>>> divider ops.
>>>> I don't want to offer the possibility to change the vco clock through the
>>>> divisor of the pll (only by a boot-loader or by DT).
>>>>
>>>> e.g. if i make a set rate on lcd-tft clock, i don't want to change the
>>>> SAI
>>>> frequencies.
>>>>
>>>> I used same structure for internal divisors of the pll (p, q, r) and for
>>>> post divisors (plli2s-q-div, pllsai-q-div & pllsai-r-div).
>>>> That why the CLK_SET_RATE_PARENT flag is transmit by parameter.
>>>>
>>>> These divisors are similar because we have to switch off the pll before
>>>> changing the rate.
>>>>
>>> But changing pll and lcd dividers only may not be enough for getting
>>> very specific pixelclocks and that might require changing the VCO
>>> frequency itself. The rest of the SAI tree should be recalculated
>>> then.
>> I agree but it seems to be too much complicated to recalculate all PLL
>> divisors if we change the vco clock.
>> You mean to use Clock notifier callback ?