* [PATCH v2] ARM: Add common files of platform definition and cpu implementing
[not found] ` <20090901112130.GB19719@n2100.arm.linux.org.uk>
@ 2009-09-01 13:06 ` Wan ZongShun
0 siblings, 0 replies; only message in thread
From: Wan ZongShun @ 2009-09-01 13:06 UTC (permalink / raw)
To: linux-arm-kernel
Dear Russell,
The "[PATCH v2] ARM: Add common files of platform definition and cpu."
patch is a old one.
I have a updated version below.
I have added the 'ts' driver name changing to this the updated patch.
In fact, I did not re-send it to maillist, but to submit it to your
patch system directly.
This updated patch has been sent to your patch system.
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
---
arch/arm/mach-w90x900/Makefile | 8 +-
arch/arm/mach-w90x900/clksel.c | 12 +-
arch/arm/mach-w90x900/clock.c | 4 +-
arch/arm/mach-w90x900/clock.h | 8 +-
arch/arm/mach-w90x900/{w90p910.c => cpu.c} | 122 ++++----
arch/arm/mach-w90x900/cpu.h | 50 ++--
arch/arm/mach-w90x900/dev.c | 389 ++++++++++++++++++++++
arch/arm/mach-w90x900/gpio.c | 78 +++---
arch/arm/mach-w90x900/irq.c | 30 +-
arch/arm/mach-w90x900/mach-nuc910evb.c | 44 +++
arch/arm/mach-w90x900/mach-w90p910evb.c | 407 ------------------------
arch/arm/mach-w90x900/{mfp-w90p910.c => mfp.c} | 38 ++--
arch/arm/mach-w90x900/nuc910.c | 60 ++++
arch/arm/mach-w90x900/nuc910.h | 28 ++
arch/arm/mach-w90x900/time.c | 70 ++--
drivers/input/touchscreen/w90p910_ts.c | 4 +-
16 files changed, 727 insertions(+), 625 deletions(-)
rename arch/arm/mach-w90x900/{w90p910.c => cpu.c} (53%)
create mode 100644 arch/arm/mach-w90x900/dev.c
create mode 100644 arch/arm/mach-w90x900/mach-nuc910evb.c
delete mode 100644 arch/arm/mach-w90x900/mach-w90p910evb.c
rename arch/arm/mach-w90x900/{mfp-w90p910.c => mfp.c} (77%)
create mode 100644 arch/arm/mach-w90x900/nuc910.c
create mode 100644 arch/arm/mach-w90x900/nuc910.h
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index 3ccd625..e38aa32 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -4,12 +4,12 @@
# Object file lists.
-obj-y := irq.o time.o mfp-w90p910.o gpio.o clock.o
-obj-y += clksel.o
+obj-y := irq.o time.o mfp.o gpio.o clock.o
+obj-y += clksel.o dev.o cpu.o
# W90X900 CPU support files
-obj-$(CONFIG_CPU_W90P910) += w90p910.o
+obj-$(CONFIG_CPU_W90P910) += nuc910.o
# machine support
-obj-$(CONFIG_MACH_W90P910EVB) += mach-w90p910evb.o
+obj-$(CONFIG_MACH_W90P910EVB) += mach-nuc910evb.o
diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c
index 5a77eb9..3de4a52 100644
--- a/arch/arm/mach-w90x900/clksel.c
+++ b/arch/arm/mach-w90x900/clksel.c
@@ -42,13 +42,13 @@ static void clock_source_select(const char
*dev_id, unsigned int clkval)
clksel = __raw_readl(REG_CLKSEL);
- if (strcmp(dev_id, "w90p910-ms") == 0)
+ if (strcmp(dev_id, "nuc900-ms") == 0)
offset = MSOFFSET;
- else if (strcmp(dev_id, "w90p910-atapi") == 0)
+ else if (strcmp(dev_id, "nuc900-atapi") == 0)
offset = ATAOFFSET;
- else if (strcmp(dev_id, "w90p910-lcd") == 0)
+ else if (strcmp(dev_id, "nuc900-lcd") == 0)
offset = LCDOFFSET;
- else if (strcmp(dev_id, "w90p910-audio") == 0)
+ else if (strcmp(dev_id, "nuc900-audio") == 0)
offset = AUDOFFSET;
else
offset = CPUOFFSET;
@@ -59,7 +59,7 @@ static void clock_source_select(const char *dev_id,
unsigned int clkval)
__raw_writel(clksel, REG_CLKSEL);
}
-void w90p910_clock_source(struct device *dev, unsigned char *src)
+void nuc900_clock_source(struct device *dev, unsigned char *src)
{
unsigned int clkval;
const char *dev_id;
@@ -87,5 +87,5 @@ void w90p910_clock_source(struct device *dev,
unsigned char *src)
mutex_unlock(&clksel_sem);
}
-EXPORT_SYMBOL(w90p910_clock_source);
+EXPORT_SYMBOL(nuc900_clock_source);
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index 70b6710..b785994 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -61,7 +61,7 @@ unsigned long clk_get_rate(struct clk *clk)
}
EXPORT_SYMBOL(clk_get_rate);
-void w90x900_clk_enable(struct clk *clk, int enable)
+void nuc900_clk_enable(struct clk *clk, int enable)
{
unsigned int clocks = clk->cken;
unsigned long clken;
@@ -76,7 +76,7 @@ void w90x900_clk_enable(struct clk *clk, int enable)
__raw_writel(clken, W90X900_VA_CLKPWR);
}
-void w90x900_subclk_enable(struct clk *clk, int enable)
+void nuc900_subclk_enable(struct clk *clk, int enable)
{
unsigned int clocks = clk->cken;
unsigned long clken;
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
index d2f0e50..f5816a0 100644
--- a/arch/arm/mach-w90x900/clock.h
+++ b/arch/arm/mach-w90x900/clock.h
@@ -12,8 +12,8 @@
#include <asm/clkdev.h>
-void w90x900_clk_enable(struct clk *clk, int enable);
-void w90x900_subclk_enable(struct clk *clk, int enable);
+void nuc900_clk_enable(struct clk *clk, int enable);
+void nuc900_subclk_enable(struct clk *clk, int enable);
void clks_register(struct clk_lookup *clks, size_t num);
struct clk {
@@ -24,13 +24,13 @@ struct clk {
#define DEFINE_CLK(_name, _ctrlbit) \
struct clk clk_##_name = { \
- .enable = w90x900_clk_enable, \
+ .enable = nuc900_clk_enable, \
.cken = (1 << _ctrlbit), \
}
#define DEFINE_SUBCLK(_name, _ctrlbit) \
struct clk clk_##_name = { \
- .enable = w90x900_subclk_enable, \
+ .enable = nuc900_subclk_enable, \
.cken = (1 << _ctrlbit), \
}
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/cpu.c
similarity index 53%
rename from arch/arm/mach-w90x900/w90p910.c
rename to arch/arm/mach-w90x900/cpu.c
index d33723b..921cef9 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -1,13 +1,11 @@
/*
- * linux/arch/arm/mach-w90x900/w90p910.c
+ * linux/arch/arm/mach-w90x900/cpu.c
*
- * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
+ * Copyright (c) 2009 Nuvoton corporation.
*
* Wan ZongShun <mcuos.com@gmail.com>
*
- * W90P910 cpu support
+ * NUC900 series cpu common support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -41,19 +39,12 @@
/* Initial IO mappings */
-static struct map_desc w90p910_iodesc[] __initdata = {
+static struct map_desc nuc900_iodesc[] __initdata = {
IODESC_ENT(IRQ),
IODESC_ENT(GCR),
IODESC_ENT(UART),
IODESC_ENT(TIMER),
IODESC_ENT(EBI),
- IODESC_ENT(USBEHCIHOST),
- IODESC_ENT(USBOHCIHOST),
- IODESC_ENT(ADC),
- IODESC_ENT(RTC),
- IODESC_ENT(KPI),
- IODESC_ENT(USBDEV),
- /*IODESC_ENT(LCD),*/
};
/* Initial clock declarations. */
@@ -78,58 +69,45 @@ static DEFINE_CLK(adc, 28);
static DEFINE_CLK(usi, 29);
static DEFINE_CLK(ext, 0);
-static struct clk_lookup w90p910_clkregs[] = {
- DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
- DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
- DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
- DEF_CLKLOOK(&clk_ms, "w90p910-fmi", "MS"),
- DEF_CLKLOOK(&clk_sd, "w90p910-fmi", "SD"),
- DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
- DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
- DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
- DEF_CLKLOOK(&clk_rmii, "w90p910-emc", "RMII"),
- DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
- DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
- DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
- DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL),
- DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL),
- DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL),
- DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
- DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
- DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
- DEF_CLKLOOK(&clk_usi, "w90p910-spi", NULL),
+static struct clk_lookup nuc900_clkregs[] = {
+ DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
+ DEF_CLKLOOK(&clk_audio, "nuc900-audio", NULL),
+ DEF_CLKLOOK(&clk_fmi, "nuc900-fmi", NULL),
+ DEF_CLKLOOK(&clk_ms, "nuc900-fmi", "MS"),
+ DEF_CLKLOOK(&clk_sd, "nuc900-fmi", "SD"),
+ DEF_CLKLOOK(&clk_dmac, "nuc900-dmac", NULL),
+ DEF_CLKLOOK(&clk_atapi, "nuc900-atapi", NULL),
+ DEF_CLKLOOK(&clk_emc, "nuc900-emc", NULL),
+ DEF_CLKLOOK(&clk_rmii, "nuc900-emc", "RMII"),
+ DEF_CLKLOOK(&clk_usbd, "nuc900-usbd", NULL),
+ DEF_CLKLOOK(&clk_usbh, "nuc900-usbh", NULL),
+ DEF_CLKLOOK(&clk_g2d, "nuc900-g2d", NULL),
+ DEF_CLKLOOK(&clk_pwm, "nuc900-pwm", NULL),
+ DEF_CLKLOOK(&clk_ps2, "nuc900-ps2", NULL),
+ DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
+ DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
+ DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
+ DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
+ DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
DEF_CLKLOOK(&clk_ext, NULL, "ext"),
};
/* Initial serial platform data */
-struct plat_serial8250_port w90p910_uart_data[] = {
- W90X900_8250PORT(UART0),
+struct plat_serial8250_port nuc900_uart_data[] = {
+ NUC900_8250PORT(UART0),
};
-struct platform_device w90p910_serial_device = {
+struct platform_device nuc900_serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
- .platform_data = w90p910_uart_data,
+ .platform_data = nuc900_uart_data,
},
};
-/*Init W90P910 evb io*/
-
-void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
-{
- unsigned long idcode = 0x0;
-
- iotable_init(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-
- idcode = __raw_readl(W90X900PDID);
- if (idcode != W90P910_CPUID)
- printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode);
-}
-
-/*Set W90P910 cpu frequence*/
-static int __init w90p910_set_clkval(unsigned int cpufreq)
+/*Set NUC900 series cpu frequence*/
+static int __init nuc900_set_clkval(unsigned int cpufreq)
{
unsigned int pllclk, ahbclk, apbclk, val;
@@ -178,7 +156,7 @@ static int __init w90p910_set_clkval(unsigned int cpufreq)
return 0;
}
-static int __init w90p910_set_cpufreq(char *str)
+static int __init nuc900_set_cpufreq(char *str)
{
unsigned long cpufreq, val;
@@ -187,9 +165,9 @@ static int __init w90p910_set_cpufreq(char *str)
strict_strtoul(str, 0, &cpufreq);
- w90p910_clock_source(NULL, "ext");
+ nuc900_clock_source(NULL, "ext");
- w90p910_set_clkval(cpufreq);
+ nuc900_set_clkval(cpufreq);
mdelay(1);
@@ -198,27 +176,37 @@ static int __init w90p910_set_cpufreq(char *str)
val |= DEFAULTSKEW;
__raw_writel(val, REG_CKSKEW);
- w90p910_clock_source(NULL, "pll0");
+ nuc900_clock_source(NULL, "pll0");
return 1;
}
-__setup("cpufreq=", w90p910_set_cpufreq);
+__setup("cpufreq=", nuc900_set_cpufreq);
-/*Init W90P910 clock*/
+/*Init NUC900 evb io*/
-void __init w90p910_init_clocks(void)
+void __init nuc900_map_io(struct map_desc *mach_desc, int mach_size)
{
- clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs));
-}
+ unsigned long idcode = 0x0;
-static int __init w90p910_init_cpu(void)
-{
- return 0;
+ iotable_init(mach_desc, mach_size);
+ iotable_init(nuc900_iodesc, ARRAY_SIZE(nuc900_iodesc));
+
+ idcode = __raw_readl(NUC900PDID);
+ if (idcode == NUC910_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
+ else if (idcode == NUC920_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC920\n", idcode);
+ else if (idcode == NUC950_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC950\n", idcode);
+ else if (idcode == NUC960_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC960\n", idcode);
}
-static int __init w90x900_arch_init(void)
+/*Init NUC900 clock*/
+
+void __init nuc900_init_clocks(void)
{
- return w90p910_init_cpu();
+ clks_register(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
}
-arch_initcall(w90x900_arch_init);
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index ddde959..4d58ba1 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -6,7 +6,7 @@
* Copyright (c) 2008 Nuvoton technology corporation
* All rights reserved.
*
- * Header file for W90X900 CPU support
+ * Header file for NUC900 CPU support
*
* Wan ZongShun <mcuos.com@gmail.com>
*
@@ -24,30 +24,7 @@
.type = MT_DEVICE, \
}
-/*Cpu identifier register*/
-
-#define W90X900PDID W90X900_VA_GCR
-#define W90P910_CPUID 0x02900910
-#define W90P920_CPUID 0x02900920
-#define W90P950_CPUID 0x02900950
-#define W90N960_CPUID 0x02900960
-
-struct w90x900_uartcfg;
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void w90x900_init_irq(void);
-extern void w90p910_init_io(struct map_desc *mach_desc, int size);
-extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
-extern void w90p910_init_clocks(void);
-extern void w90p910_map_io(struct map_desc *mach_desc, int size);
-extern struct platform_device w90p910_serial_device;
-extern struct sys_timer w90x900_timer;
-extern void w90p910_clock_source(struct device *dev, unsigned char *src);
-
-#define W90X900_8250PORT(name) \
+#define NUC900_8250PORT(name) \
{ \
.membase = name##_BA, \
.mapbase = name##_PA, \
@@ -57,3 +34,26 @@ extern void w90p910_clock_source(struct device
*dev, unsigned char *src);
.iotype = UPIO_MEM, \
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
}
+
+/*Cpu identifier register*/
+
+#define NUC900PDID W90X900_VA_GCR
+#define NUC910_CPUID 0x02900910
+#define NUC920_CPUID 0x02900920
+#define NUC950_CPUID 0x02900950
+#define NUC960_CPUID 0x02900960
+
+/* extern file from cpu.c */
+
+extern void nuc900_clock_source(struct device *dev, unsigned char *src);
+extern void nuc900_init_clocks(void);
+extern void nuc900_map_io(struct map_desc *mach_desc, int mach_size);
+extern void nuc900_board_init(struct platform_device **device, int size);
+
+/* for either public between 910 and 920, or between 920 and 950 */
+
+extern struct platform_device nuc900_serial_device;
+extern struct platform_device nuc900_device_fmi;
+extern struct platform_device nuc900_device_kpi;
+extern struct platform_device nuc900_device_rtc;
+extern struct platform_device nuc900_device_ts;
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
new file mode 100644
index 0000000..2a6f98d
--- /dev/null
+++ b/arch/arm/mach-w90x900/dev.c
@@ -0,0 +1,389 @@
+/*
+ * linux/arch/arm/mach-w90x900/dev.c
+ *
+ * Copyright (C) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+
+#include "cpu.h"
+
+/*NUC900 evb norflash driver data */
+
+#define NUC900_FLASH_BASE 0xA0000000
+#define NUC900_FLASH_SIZE 0x400000
+#define SPIOFFSET 0x200
+#define SPIOREG_SIZE 0x100
+
+static struct mtd_partition nuc900_flash_partitions[] = {
+ {
+ .name = "NOR Partition 1 for kernel (960K)",
+ .size = 0xF0000,
+ .offset = 0x10000,
+ },
+ {
+ .name = "NOR Partition 2 for image (1M)",
+ .size = 0x100000,
+ .offset = 0x100000,
+ },
+ {
+ .name = "NOR Partition 3 for user (2M)",
+ .size = 0x200000,
+ .offset = 0x00200000,
+ }
+};
+
+static struct physmap_flash_data nuc900_flash_data = {
+ .width = 2,
+ .parts = nuc900_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nuc900_flash_partitions),
+};
+
+static struct resource nuc900_flash_resources[] = {
+ {
+ .start = NUC900_FLASH_BASE,
+ .end = NUC900_FLASH_BASE + NUC900_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device nuc900_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &nuc900_flash_data,
+ },
+ .resource = nuc900_flash_resources,
+ .num_resources = ARRAY_SIZE(nuc900_flash_resources),
+};
+
+/* USB EHCI Host Controller */
+
+static struct resource nuc900_usb_ehci_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBEHCIHOST,
+ .end = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH,
+ .end = IRQ_USBH,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 nuc900_device_usb_ehci_dmamask = 0xffffffffUL;
+
+static struct platform_device nuc900_device_usb_ehci = {
+ .name = "nuc900-ehci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_usb_ehci_resource),
+ .resource = nuc900_usb_ehci_resource,
+ .dev = {
+ .dma_mask = &nuc900_device_usb_ehci_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+/* USB OHCI Host Controller */
+
+static struct resource nuc900_usb_ohci_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBOHCIHOST,
+ .end = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH,
+ .end = IRQ_USBH,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 nuc900_device_usb_ohci_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_usb_ohci = {
+ .name = "nuc900-ohci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_usb_ohci_resource),
+ .resource = nuc900_usb_ohci_resource,
+ .dev = {
+ .dma_mask = &nuc900_device_usb_ohci_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+/* USB Device (Gadget)*/
+
+static struct resource nuc900_usbgadget_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBDEV,
+ .end = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBD,
+ .end = IRQ_USBD,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device nuc900_device_usbgadget = {
+ .name = "nuc900-usbgadget",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_usbgadget_resource),
+ .resource = nuc900_usbgadget_resource,
+};
+
+/* MAC device */
+
+static struct resource nuc900_emc_resource[] = {
+ [0] = {
+ .start = W90X900_PA_EMC,
+ .end = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EMCTX,
+ .end = IRQ_EMCTX,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_EMCRX,
+ .end = IRQ_EMCRX,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 nuc900_device_emc_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_emc = {
+ .name = "nuc900-emc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_emc_resource),
+ .resource = nuc900_emc_resource,
+ .dev = {
+ .dma_mask = &nuc900_device_emc_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+/* SPI device */
+
+static struct resource nuc900_spi_resource[] = {
+ [0] = {
+ .start = W90X900_PA_I2C + SPIOFFSET,
+ .end = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP,
+ .end = IRQ_SSP,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device nuc900_device_spi = {
+ .name = "nuc900-spi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_spi_resource),
+ .resource = nuc900_spi_resource,
+};
+
+/* spi device, spi flash info */
+
+static struct mtd_partition nuc900_spi_flash_partitions[] = {
+ {
+ .name = "bootloader(spi)",
+ .size = 0x0100000,
+ .offset = 0,
+ },
+};
+
+static struct flash_platform_data nuc900_spi_flash_data = {
+ .name = "m25p80",
+ .parts = nuc900_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nuc900_spi_flash_partitions),
+ .type = "w25x16",
+};
+
+static struct spi_board_info nuc900_spi_board_info[] __initdata = {
+ {
+ .modalias = "m25p80",
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .platform_data = &nuc900_spi_flash_data,
+ .mode = SPI_MODE_0,
+ },
+};
+
+/* WDT Device */
+
+static struct resource nuc900_wdt_resource[] = {
+ [0] = {
+ .start = W90X900_PA_TIMER,
+ .end = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_WDT,
+ .end = IRQ_WDT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device nuc900_device_wdt = {
+ .name = "nuc900-wdt",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_wdt_resource),
+ .resource = nuc900_wdt_resource,
+};
+
+/*
+ * public device definition between 910 and 920, or 910
+ * and 950 or 950 and 960...,their dev platform register
+ * should be in specific file such as nuc950, nuc960 c
+ * files rather than the public dev.c file here. so the
+ * corresponding platform_device definition should not be
+ * static.
+*/
+
+/* RTC controller*/
+
+static struct resource nuc900_rtc_resource[] = {
+ [0] = {
+ .start = W90X900_PA_RTC,
+ .end = W90X900_PA_RTC + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTC,
+ .end = IRQ_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device nuc900_device_rtc = {
+ .name = "nuc900-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_rtc_resource),
+ .resource = nuc900_rtc_resource,
+};
+
+/*TouchScreen controller*/
+
+static struct resource nuc900_ts_resource[] = {
+ [0] = {
+ .start = W90X900_PA_ADC,
+ .end = W90X900_PA_ADC + W90X900_SZ_ADC-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_ADC,
+ .end = IRQ_ADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device nuc900_device_ts = {
+ .name = "nuc900-ts",
+ .id = -1,
+ .resource = nuc900_ts_resource,
+ .num_resources = ARRAY_SIZE(nuc900_ts_resource),
+};
+
+/* FMI Device */
+
+static struct resource nuc900_fmi_resource[] = {
+ [0] = {
+ .start = W90X900_PA_FMI,
+ .end = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_FMI,
+ .end = IRQ_FMI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device nuc900_device_fmi = {
+ .name = "nuc900-fmi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_fmi_resource),
+ .resource = nuc900_fmi_resource,
+};
+
+/* KPI controller*/
+
+static struct resource nuc900_kpi_resource[] = {
+ [0] = {
+ .start = W90X900_PA_KPI,
+ .end = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KPI,
+ .end = IRQ_KPI,
+ .flags = IORESOURCE_IRQ,
+ }
+
+};
+
+struct platform_device nuc900_device_kpi = {
+ .name = "nuc900-kpi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_kpi_resource),
+ .resource = nuc900_kpi_resource,
+};
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *nuc900_public_dev[] __initdata = {
+ &nuc900_serial_device,
+ &nuc900_flash_device,
+ &nuc900_device_usb_ehci,
+ &nuc900_device_usb_ohci,
+ &nuc900_device_usbgadget,
+ &nuc900_device_emc,
+ &nuc900_device_spi,
+ &nuc900_device_wdt,
+};
+
+/* Provide adding specific CPU platform devices API */
+
+void __init nuc900_board_init(struct platform_device **device, int size)
+{
+ platform_add_devices(device, size);
+ platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
+ spi_register_board_info(nuc900_spi_board_info,
+ ARRAY_SIZE(nuc900_spi_board_info));
+}
+
diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c
index c72e0df..ba05aec 100644
--- a/arch/arm/mach-w90x900/gpio.c
+++ b/arch/arm/mach-w90x900/gpio.c
@@ -1,7 +1,7 @@
/*
- * linux/arch/arm/mach-w90p910/gpio.c
+ * linux/arch/arm/mach-w90x900/gpio.c
*
- * Generic w90p910 GPIO handling
+ * Generic nuc900 GPIO handling
*
* Wan ZongShun <mcuos.com@gmail.com>
*
@@ -30,31 +30,31 @@
#define GPIO_IN (0x0C)
#define GROUPINERV (0x10)
#define GPIO_GPIO(Nb) (0x00000001 << (Nb))
-#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip)
+#define to_nuc900_gpio_chip(c) container_of(c, struct nuc900_gpio_chip, chip)
-#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio) \
+#define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio) \
{ \
.chip = { \
.label = name, \
- .direction_input = w90p910_dir_input, \
- .direction_output = w90p910_dir_output, \
- .get = w90p910_gpio_get, \
- .set = w90p910_gpio_set, \
+ .direction_input = nuc900_dir_input, \
+ .direction_output = nuc900_dir_output, \
+ .get = nuc900_gpio_get, \
+ .set = nuc900_gpio_set, \
.base = base_gpio, \
.ngpio = nr_gpio, \
} \
}
-struct w90p910_gpio_chip {
+struct nuc900_gpio_chip {
struct gpio_chip chip;
void __iomem *regbase; /* Base of group register*/
spinlock_t gpio_lock;
};
-static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
+static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
- void __iomem *pio = w90p910_gpio->regbase + GPIO_IN;
+ struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+ void __iomem *pio = nuc900_gpio->regbase + GPIO_IN;
unsigned int regval;
regval = __raw_readl(pio);
@@ -63,14 +63,14 @@ static int w90p910_gpio_get(struct gpio_chip
*chip, unsigned offset)
return (regval != 0);
}
-static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
{
- struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
- void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT;
+ struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+ void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT;
unsigned int regval;
unsigned long flags;
- spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+ spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
regval = __raw_readl(pio);
@@ -81,36 +81,36 @@ static void w90p910_gpio_set(struct gpio_chip
*chip, unsigned offset, int val)
__raw_writel(regval, pio);
- spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+ spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
}
-static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset)
+static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset)
{
- struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
- void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+ struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+ void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
unsigned int regval;
unsigned long flags;
- spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+ spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
regval = __raw_readl(pio);
regval &= ~GPIO_GPIO(offset);
__raw_writel(regval, pio);
- spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+ spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
return 0;
}
-static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
+static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val)
{
- struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
- void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT;
- void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+ struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+ void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT;
+ void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
unsigned int regval;
unsigned long flags;
- spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+ spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
regval = __raw_readl(pio);
regval |= GPIO_GPIO(offset);
@@ -125,28 +125,28 @@ static int w90p910_dir_output(struct gpio_chip
*chip, unsigned offset, int val)
__raw_writel(regval, outreg);
- spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+ spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
return 0;
}
-static struct w90p910_gpio_chip w90p910_gpio[] = {
- W90P910_GPIO_CHIP("GROUPC", 0, 16),
- W90P910_GPIO_CHIP("GROUPD", 16, 10),
- W90P910_GPIO_CHIP("GROUPE", 26, 14),
- W90P910_GPIO_CHIP("GROUPF", 40, 10),
- W90P910_GPIO_CHIP("GROUPG", 50, 17),
- W90P910_GPIO_CHIP("GROUPH", 67, 8),
- W90P910_GPIO_CHIP("GROUPI", 75, 17),
+static struct nuc900_gpio_chip nuc900_gpio[] = {
+ NUC900_GPIO_CHIP("GROUPC", 0, 16),
+ NUC900_GPIO_CHIP("GROUPD", 16, 10),
+ NUC900_GPIO_CHIP("GROUPE", 26, 14),
+ NUC900_GPIO_CHIP("GROUPF", 40, 10),
+ NUC900_GPIO_CHIP("GROUPG", 50, 17),
+ NUC900_GPIO_CHIP("GROUPH", 67, 8),
+ NUC900_GPIO_CHIP("GROUPI", 75, 17),
};
-void __init w90p910_init_gpio(int nr_group)
+void __init nuc900_init_gpio(int nr_group)
{
unsigned i;
- struct w90p910_gpio_chip *gpio_chip;
+ struct nuc900_gpio_chip *gpio_chip;
for (i = 0; i < nr_group; i++) {
- gpio_chip = &w90p910_gpio[i];
+ gpio_chip = &nuc900_gpio[i];
spin_lock_init(&gpio_chip->gpio_lock);
gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
gpiochip_add(&gpio_chip->chip);
diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
index a296c9b..0ce9d8e 100644
--- a/arch/arm/mach-w90x900/irq.c
+++ b/arch/arm/mach-w90x900/irq.c
@@ -36,13 +36,13 @@ struct group_irq {
static DEFINE_SPINLOCK(groupirq_lock);
-#define DEFINE_GROUP(_name, _ctrlbit, _num) \
-struct group_irq group_##_name = { \
- .enable = w90x900_group_enable, \
- .gpen = ((2 ^ _num) - 1) << _ctrlbit, \
+#define DEFINE_GROUP(_name, _ctrlbit, _num) \
+struct group_irq group_##_name = { \
+ .enable = nuc900_group_enable, \
+ .gpen = ((1 << _num) - 1) << _ctrlbit, \
}
-static void w90x900_group_enable(struct group_irq *gpirq, int enable);
+static void nuc900_group_enable(struct group_irq *gpirq, int enable);
static DEFINE_GROUP(nirq0, 0, 4);
static DEFINE_GROUP(nirq1, 4, 4);
@@ -77,7 +77,7 @@ static void group_irq_disable(struct group_irq *group_irq)
spin_unlock_irqrestore(&groupirq_lock, flags);
}
-static void w90x900_group_enable(struct group_irq *gpirq, int enable)
+static void nuc900_group_enable(struct group_irq *gpirq, int enable)
{
unsigned int groupen = gpirq->gpen;
unsigned long regval;
@@ -92,7 +92,7 @@ static void w90x900_group_enable(struct group_irq
*gpirq, int enable)
__raw_writel(regval, REG_AIC_GEN);
}
-static void w90x900_irq_mask(unsigned int irq)
+static void nuc900_irq_mask(unsigned int irq)
{
struct group_irq *group_irq;
@@ -143,12 +143,12 @@ static void w90x900_irq_mask(unsigned int irq)
* to REG_AIC_EOSCR for ACK
*/
-static void w90x900_irq_ack(unsigned int irq)
+static void nuc900_irq_ack(unsigned int irq)
{
__raw_writel(0x01, REG_AIC_EOSCR);
}
-static void w90x900_irq_unmask(unsigned int irq)
+static void nuc900_irq_unmask(unsigned int irq)
{
struct group_irq *group_irq;
@@ -194,20 +194,20 @@ static void w90x900_irq_unmask(unsigned int irq)
group_irq_enable(group_irq);
}
-static struct irq_chip w90x900_irq_chip = {
- .ack = w90x900_irq_ack,
- .mask = w90x900_irq_mask,
- .unmask = w90x900_irq_unmask,
+static struct irq_chip nuc900_irq_chip = {
+ .ack = nuc900_irq_ack,
+ .mask = nuc900_irq_mask,
+ .unmask = nuc900_irq_unmask,
};
-void __init w90x900_init_irq(void)
+void __init nuc900_init_irq(void)
{
int irqno;
__raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) {
- set_irq_chip(irqno, &w90x900_irq_chip);
+ set_irq_chip(irqno, &nuc900_irq_chip);
set_irq_handler(irqno, handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c
b/arch/arm/mach-w90x900/mach-nuc910evb.c
new file mode 100644
index 0000000..ec05bda
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc910.h"
+
+static void __init nuc910evb_map_io(void)
+{
+ nuc910_map_io();
+ nuc910_init_clocks();
+}
+
+static void __init nuc910evb_init(void)
+{
+ nuc910_board_init();
+}
+
+MACHINE_START(W90P910EVB, "W90P910EVB")
+ /* Maintainer: Wan ZongShun */
+ .phys_io = W90X900_PA_UART,
+ .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+ .boot_params = 0,
+ .map_io = nuc910evb_map_io,
+ .init_irq = nuc900_init_irq,
+ .init_machine = nuc910evb_init,
+ .timer = &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c
b/arch/arm/mach-w90x900/mach-w90p910evb.c
deleted file mode 100644
index 117578a..0000000
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mach-w90p910evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-serial.h>
-#include <mach/map.h>
-
-#include "cpu.h"
-/*w90p910 evb norflash driver data */
-
-#define W90P910_FLASH_BASE 0xA0000000
-#define W90P910_FLASH_SIZE 0x400000
-#define SPIOFFSET 0x200
-#define SPIOREG_SIZE 0x100
-
-static struct mtd_partition w90p910_flash_partitions[] = {
- {
- .name = "NOR Partition 1 for kernel (960K)",
- .size = 0xF0000,
- .offset = 0x10000,
- },
- {
- .name = "NOR Partition 2 for image (1M)",
- .size = 0x100000,
- .offset = 0x100000,
- },
- {
- .name = "NOR Partition 3 for user (2M)",
- .size = 0x200000,
- .offset = 0x00200000,
- }
-};
-
-static struct physmap_flash_data w90p910_flash_data = {
- .width = 2,
- .parts = w90p910_flash_partitions,
- .nr_parts = ARRAY_SIZE(w90p910_flash_partitions),
-};
-
-static struct resource w90p910_flash_resources[] = {
- {
- .start = W90P910_FLASH_BASE,
- .end = W90P910_FLASH_BASE + W90P910_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device w90p910_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &w90p910_flash_data,
- },
- .resource = w90p910_flash_resources,
- .num_resources = ARRAY_SIZE(w90p910_flash_resources),
-};
-
-/* USB EHCI Host Controller */
-
-static struct resource w90x900_usb_ehci_resource[] = {
- [0] = {
- .start = W90X900_PA_USBEHCIHOST,
- .end = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBH,
- .end = IRQ_USBH,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL;
-
-struct platform_device w90x900_device_usb_ehci = {
- .name = "w90x900-ehci",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_usb_ehci_resource),
- .resource = w90x900_usb_ehci_resource,
- .dev = {
- .dma_mask = &w90x900_device_usb_ehci_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-EXPORT_SYMBOL(w90x900_device_usb_ehci);
-
-/* USB OHCI Host Controller */
-
-static struct resource w90x900_usb_ohci_resource[] = {
- [0] = {
- .start = W90X900_PA_USBOHCIHOST,
- .end = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBH,
- .end = IRQ_USBH,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL;
-struct platform_device w90x900_device_usb_ohci = {
- .name = "w90x900-ohci",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_usb_ohci_resource),
- .resource = w90x900_usb_ohci_resource,
- .dev = {
- .dma_mask = &w90x900_device_usb_ohci_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-EXPORT_SYMBOL(w90x900_device_usb_ohci);
-
-/*TouchScreen controller*/
-
-static struct resource w90x900_ts_resource[] = {
- [0] = {
- .start = W90X900_PA_ADC,
- .end = W90X900_PA_ADC + W90X900_SZ_ADC-1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_ADC,
- .end = IRQ_ADC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device w90x900_device_ts = {
- .name = "w90x900-ts",
- .id = -1,
- .resource = w90x900_ts_resource,
- .num_resources = ARRAY_SIZE(w90x900_ts_resource),
-};
-EXPORT_SYMBOL(w90x900_device_ts);
-
-/* RTC controller*/
-
-static struct resource w90x900_rtc_resource[] = {
- [0] = {
- .start = W90X900_PA_RTC,
- .end = W90X900_PA_RTC + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_RTC,
- .end = IRQ_RTC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device w90x900_device_rtc = {
- .name = "w90x900-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_rtc_resource),
- .resource = w90x900_rtc_resource,
-};
-EXPORT_SYMBOL(w90x900_device_rtc);
-
-/* KPI controller*/
-
-static struct resource w90x900_kpi_resource[] = {
- [0] = {
- .start = W90X900_PA_KPI,
- .end = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_KPI,
- .end = IRQ_KPI,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device w90x900_device_kpi = {
- .name = "w90x900-kpi",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_kpi_resource),
- .resource = w90x900_kpi_resource,
-};
-EXPORT_SYMBOL(w90x900_device_kpi);
-
-/* USB Device (Gadget)*/
-
-static struct resource w90x900_usbgadget_resource[] = {
- [0] = {
- .start = W90X900_PA_USBDEV,
- .end = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBD,
- .end = IRQ_USBD,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device w90x900_device_usbgadget = {
- .name = "w90x900-usbgadget",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_usbgadget_resource),
- .resource = w90x900_usbgadget_resource,
-};
-EXPORT_SYMBOL(w90x900_device_usbgadget);
-
-/* FMI Device */
-
-static struct resource w90p910_fmi_resource[] = {
- [0] = {
- .start = W90X900_PA_FMI,
- .end = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_FMI,
- .end = IRQ_FMI,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device w90p910_device_fmi = {
- .name = "w90p910-fmi",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90p910_fmi_resource),
- .resource = w90p910_fmi_resource,
-};
-
-/* MAC device */
-
-static struct resource w90x900_emc_resource[] = {
- [0] = {
- .start = W90X900_PA_EMC,
- .end = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_EMCTX,
- .end = IRQ_EMCTX,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_EMCRX,
- .end = IRQ_EMCRX,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 w90x900_device_emc_dmamask = 0xffffffffUL;
-static struct platform_device w90p910_device_emc = {
- .name = "w90p910-emc",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_emc_resource),
- .resource = w90x900_emc_resource,
- .dev = {
- .dma_mask = &w90x900_device_emc_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-/* SPI device */
-
-static struct resource w90p910_spi_resource[] = {
- [0] = {
- .start = W90X900_PA_I2C + SPIOFFSET,
- .end = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SSP,
- .end = IRQ_SSP,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device w90p910_device_spi = {
- .name = "w90p910-spi",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90p910_spi_resource),
- .resource = w90p910_spi_resource,
-};
-
-/* spi device, spi flash info */
-
-static struct mtd_partition w90p910_spi_flash_partitions[] = {
- {
- .name = "bootloader(spi)",
- .size = 0x0100000,
- .offset = 0,
- },
-};
-
-static struct flash_platform_data w90p910_spi_flash_data = {
- .name = "m25p80",
- .parts = w90p910_spi_flash_partitions,
- .nr_parts = ARRAY_SIZE(w90p910_spi_flash_partitions),
- .type = "w25x16",
-};
-
-static struct spi_board_info w90p910_spi_board_info[] __initdata = {
- {
- .modalias = "m25p80",
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 1,
- .platform_data = &w90p910_spi_flash_data,
- .mode = SPI_MODE_0,
- },
-};
-
-/* WDT Device */
-
-static struct resource w90p910_wdt_resource[] = {
- [0] = {
- .start = W90X900_PA_TIMER,
- .end = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_WDT,
- .end = IRQ_WDT,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device w90p910_device_wdt = {
- .name = "w90p910-wdt",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90p910_wdt_resource),
- .resource = w90p910_wdt_resource,
-};
-
-static struct map_desc w90p910_iodesc[] __initdata = {
-};
-
-/*Here should be your evb resourse,such as LCD*/
-
-static struct platform_device *w90p910evb_dev[] __initdata = {
- &w90p910_serial_device,
- &w90p910_flash_device,
- &w90x900_device_usb_ehci,
- &w90x900_device_usb_ohci,
- &w90x900_device_ts,
- &w90x900_device_rtc,
- &w90x900_device_kpi,
- &w90x900_device_usbgadget,
- &w90p910_device_fmi,
- &w90p910_device_emc,
- &w90p910_device_spi,
- &w90p910_device_wdt,
-};
-
-static void __init w90p910evb_map_io(void)
-{
- w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
- w90p910_init_clocks();
-}
-
-static void __init w90p910evb_init(void)
-{
- platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev));
- spi_register_board_info(w90p910_spi_board_info,
- ARRAY_SIZE(w90p910_spi_board_info));
-}
-
-MACHINE_START(W90P910EVB, "W90P910EVB")
- /* Maintainer: Wan ZongShun */
- .phys_io = W90X900_PA_UART,
- .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
- .boot_params = 0,
- .map_io = w90p910evb_map_io,
- .init_irq = w90x900_init_irq,
- .init_machine = w90p910evb_init,
- .timer = &w90x900_timer,
-MACHINE_END
diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp.c
similarity index 77%
rename from arch/arm/mach-w90x900/mfp-w90p910.c
rename to arch/arm/mach-w90x900/mfp.c
index 4533098..a47dc9a 100644
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ b/arch/arm/mach-w90x900/mfp.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-w90x900/mfp-w90p910.c
+ * linux/arch/arm/mach-w90x900/mfp.c
*
* Copyright (c) 2008 Nuvoton technology corporation
*
@@ -55,7 +55,7 @@ void mfp_set_groupf(struct device *dev)
mfpen = __raw_readl(REG_MFSEL);
- if (strcmp(dev_id, "w90p910-emc") == 0)
+ if (strcmp(dev_id, "nuc900-emc") == 0)
mfpen |= GPSELF;/*enable mac*/
else
mfpen &= ~GPSELF;/*GPIOF[9:0]*/
@@ -79,16 +79,16 @@ void mfp_set_groupc(struct device *dev)
mfpen = __raw_readl(REG_MFSEL);
- if (strcmp(dev_id, "w90p910-lcd") == 0)
+ if (strcmp(dev_id, "nuc900-lcd") == 0)
mfpen |= GPSELC;/*enable lcd*/
- else if (strcmp(dev_id, "w90p910-kpi") == 0) {
- mfpen &= (~GPSELC);/*enable kpi*/
- mfpen |= ENKPI;
- } else if (strcmp(dev_id, "w90p910-nand") == 0) {
- mfpen &= (~GPSELC);/*enable nand*/
- mfpen |= ENNAND;
- } else
- mfpen &= (~GPSELC);/*GPIOC[14:0]*/
+ else if (strcmp(dev_id, "nuc900-kpi") == 0) {
+ mfpen &= (~GPSELC);/*enable kpi*/
+ mfpen |= ENKPI;
+ } else if (strcmp(dev_id, "nuc900-nand") == 0) {
+ mfpen &= (~GPSELC);/*enable nand*/
+ mfpen |= ENNAND;
+ } else
+ mfpen &= (~GPSELC);/*GPIOC[14:0]*/
__raw_writel(mfpen, REG_MFSEL);
@@ -111,12 +111,12 @@ void mfp_set_groupi(struct device *dev)
mfpen &= ~GPSELEI1;/*default gpio16*/
- if (strcmp(dev_id, "w90p910-wdog") == 0)
+ if (strcmp(dev_id, "nuc900-wdog") == 0)
mfpen |= GPSELEI1;/*enable wdog*/
- else if (strcmp(dev_id, "w90p910-atapi") == 0)
- mfpen |= GPSELEI0;/*enable atapi*/
- else if (strcmp(dev_id, "w90p910-keypad") == 0)
- mfpen &= ~GPSELEI0;/*enable keypad*/
+ else if (strcmp(dev_id, "nuc900-atapi") == 0)
+ mfpen |= GPSELEI0;/*enable atapi*/
+ else if (strcmp(dev_id, "nuc900-keypad") == 0)
+ mfpen &= ~GPSELEI0;/*enable keypad*/
__raw_writel(mfpen, REG_MFSEL);
@@ -137,13 +137,13 @@ void mfp_set_groupg(struct device *dev)
mfpen = __raw_readl(REG_MFSEL);
- if (strcmp(dev_id, "w90p910-spi") == 0) {
+ if (strcmp(dev_id, "nuc900-spi") == 0) {
mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
mfpen |= ENSPI;/*enable spi*/
- } else if (strcmp(dev_id, "w90p910-i2c0") == 0) {
+ } else if (strcmp(dev_id, "nuc900-i2c0") == 0) {
mfpen &= ~(GPIOG0TO1);
mfpen |= ENI2C0;/*enable i2c0*/
- } else if (strcmp(dev_id, "w90p910-i2c1") == 0) {
+ } else if (strcmp(dev_id, "nuc900-i2c1") == 0) {
mfpen &= ~(GPIOG2TO3);
mfpen |= ENI2C1;/*enable i2c1*/
} else {
diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c
new file mode 100644
index 0000000..656f03b
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.c
@@ -0,0 +1,60 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc910.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC910 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+#include "clock.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc910_dev[] __initdata = {
+ &nuc900_device_ts,
+ &nuc900_device_rtc,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc910evb_iodesc[] __initdata = {
+ IODESC_ENT(USBEHCIHOST),
+ IODESC_ENT(USBOHCIHOST),
+ IODESC_ENT(KPI),
+ IODESC_ENT(USBDEV),
+ IODESC_ENT(ADC),
+};
+
+/*Init NUC910 evb io*/
+
+void __init nuc910_map_io(void)
+{
+ nuc900_map_io(nuc910evb_iodesc, ARRAY_SIZE(nuc910evb_iodesc));
+}
+
+/*Init NUC910 clock*/
+
+void __init nuc910_init_clocks(void)
+{
+ nuc900_init_clocks();
+}
+
+/*Init NUC910 board info*/
+
+void __init nuc910_board_init(void)
+{
+ nuc900_board_init(nuc910_dev, ARRAY_SIZE(nuc910_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc910.h b/arch/arm/mach-w90x900/nuc910.h
new file mode 100644
index 0000000..83e9ba5
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc910.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc910.c */
+
+extern void nuc910_board_init(void);
+extern void nuc910_init_clocks(void);
+extern void nuc910_map_io(void);
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index 5e06770..4128af8 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -44,7 +44,7 @@
unsigned int timer0_load;
-static void w90p910_clockevent_setmode(enum clock_event_mode mode,
+static void nuc900_clockevent_setmode(enum clock_event_mode mode,
struct clock_event_device *clk)
{
unsigned int val;
@@ -71,7 +71,7 @@ static void w90p910_clockevent_setmode(enum
clock_event_mode mode,
__raw_writel(val, REG_TCSR0);
}
-static int w90p910_clockevent_setnextevent(unsigned long evt,
+static int nuc900_clockevent_setnextevent(unsigned long evt,
struct clock_event_device *clk)
{
unsigned int val;
@@ -85,20 +85,20 @@ static int
w90p910_clockevent_setnextevent(unsigned long evt,
return 0;
}
-static struct clock_event_device w90p910_clockevent_device = {
- .name = "w90p910-timer0",
+static struct clock_event_device nuc900_clockevent_device = {
+ .name = "nuc900-timer0",
.shift = 32,
.features = CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_mode = w90p910_clockevent_setmode,
- .set_next_event = w90p910_clockevent_setnextevent,
+ .set_mode = nuc900_clockevent_setmode,
+ .set_next_event = nuc900_clockevent_setnextevent,
.rating = 300,
};
/*IRQ handler for the timer*/
-static irqreturn_t w90p910_timer0_interrupt(int irq, void *dev_id)
+static irqreturn_t nuc900_timer0_interrupt(int irq, void *dev_id)
{
- struct clock_event_device *evt = &w90p910_clockevent_device;
+ struct clock_event_device *evt = &nuc900_clockevent_device;
__raw_writel(0x01, REG_TISR); /* clear TIF0 */
@@ -106,40 +106,40 @@ static irqreturn_t w90p910_timer0_interrupt(int
irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction w90p910_timer0_irq = {
- .name = "w90p910-timer0",
+static struct irqaction nuc900_timer0_irq = {
+ .name = "nuc900-timer0",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = w90p910_timer0_interrupt,
+ .handler = nuc900_timer0_interrupt,
};
-static void __init w90p910_clockevents_init(unsigned int rate)
+static void __init nuc900_clockevents_init(unsigned int rate)
{
- w90p910_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
- w90p910_clockevent_device.shift);
- w90p910_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
- &w90p910_clockevent_device);
- w90p910_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
- &w90p910_clockevent_device);
- w90p910_clockevent_device.cpumask = cpumask_of(0);
-
- clockevents_register_device(&w90p910_clockevent_device);
+ nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
+ nuc900_clockevent_device.shift);
+ nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
+ &nuc900_clockevent_device);
+ nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
+ &nuc900_clockevent_device);
+ nuc900_clockevent_device.cpumask = cpumask_of(0);
+
+ clockevents_register_device(&nuc900_clockevent_device);
}
-static cycle_t w90p910_get_cycles(struct clocksource *cs)
+static cycle_t nuc900_get_cycles(struct clocksource *cs)
{
return ~__raw_readl(REG_TDR1);
}
-static struct clocksource clocksource_w90p910 = {
- .name = "w90p910-timer1",
+static struct clocksource clocksource_nuc900 = {
+ .name = "nuc900-timer1",
.rating = 200,
- .read = w90p910_get_cycles,
+ .read = nuc900_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
.shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static void __init w90p910_clocksource_init(unsigned int rate)
+static void __init nuc900_clocksource_init(unsigned int rate)
{
unsigned int val;
@@ -149,12 +149,12 @@ static void __init
w90p910_clocksource_init(unsigned int rate)
val |= (COUNTEN | PERIOD);
__raw_writel(val, REG_TCSR1);
- clocksource_w90p910.mult =
- clocksource_khz2mult((rate / 1000), clocksource_w90p910.shift);
- clocksource_register(&clocksource_w90p910);
+ clocksource_nuc900.mult =
+ clocksource_khz2mult((rate / 1000), clocksource_nuc900.shift);
+ clocksource_register(&clocksource_nuc900);
}
-static void __init w90p910_timer_init(void)
+static void __init nuc900_timer_init(void)
{
struct clk *ck_ext = clk_get(NULL, "ext");
unsigned int rate;
@@ -171,12 +171,12 @@ static void __init w90p910_timer_init(void)
__raw_writel(RESETINT, REG_TISR);
timer0_load = (rate / TICKS_PER_SEC);
- setup_irq(IRQ_TIMER0, &w90p910_timer0_irq);
+ setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
- w90p910_clocksource_init(rate);
- w90p910_clockevents_init(rate);
+ nuc900_clocksource_init(rate);
+ nuc900_clockevents_init(rate);
}
-struct sys_timer w90x900_timer = {
- .init = w90p910_timer_init,
+struct sys_timer nuc900_timer = {
+ .init = nuc900_timer_init,
};
diff --git a/drivers/input/touchscreen/w90p910_ts.c
b/drivers/input/touchscreen/w90p910_ts.c
index 6071f58..937dfe4 100644
--- a/drivers/input/touchscreen/w90p910_ts.c
+++ b/drivers/input/touchscreen/w90p910_ts.c
@@ -326,7 +326,7 @@ static struct platform_driver w90x900ts_driver = {
.probe = w90x900ts_probe,
.remove = __devexit_p(w90x900ts_remove),
.driver = {
- .name = "w90x900-ts",
+ .name = "nuc900-ts",
.owner = THIS_MODULE,
},
};
@@ -347,4 +347,4 @@ module_exit(w90x900ts_exit);
MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
MODULE_DESCRIPTION("w90p910 touch screen driver!");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:w90p910-ts");
+MODULE_ALIAS("platform:nuc900-ts");
--
1.5.6.3
2009/9/1 Russell King - ARM Linux <linux@arm.linux.org.uk>:
> On Thu, Aug 20, 2009 at 11:33:32AM +0800, Wan ZongShun wrote:
>> How about this fixed patches?
>> Could I merge renaming 'ts' and 'keypad' platform_driver name into this patch?
>> and in case the drivers miss binding to platform device when via input
>> subsystem.
>
> I think it would make sense for this patch to also include _just_ the
> change to the driver name for those drivers. ?If you could submit that
> to the patch system, I'll apply it later today.
>
> Thanks.
>
--
Wan z.s
^ permalink raw reply related [flat|nested] only message in thread