[PATCH 5/5] ARM: dts: OMAP5: Specify nonsecure PPI IRQ for arch timer

[marc.zyngier@arm.com (Marc Zyngier)]

On Sat, 19 Jan 2013 00:21:22 +0530, Santosh Shilimkar
<santosh.shilimkar@ti.com> wrote:
> On Friday 18 January 2013 10:38 PM, Marc Zyngier wrote:
>> On 18/01/13 17:00, Santosh Shilimkar wrote:
>>> On Friday 18 January 2013 09:32 PM, Marc Zyngier wrote:
>>>> On 18/01/13 15:32, Santosh Shilimkar wrote:
>>>>> From: Rajendra Nayak <rnayak@ti.com>
>>>>>
>>>>> Specify both secure as well as nonsecure PPI IRQ for arch
>>>>> timer. This fixes the following errors seen on DT OMAP5 boot..
>>>>>
>>>>> [    0.000000] arch_timer: No interrupt available, giving up
>>>>>
>>>>> Cc: Benoit Cousson <b-cousson@ti.com>
>>>>>
>>>>> Signed-off-by: Rajendra Nayak <rnayak@ti.com>
>>>>> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
>>>>> ---
>>>>>    arch/arm/boot/dts/omap5.dtsi |   16 ++++++++++++----
>>>>>    1 file changed, 12 insertions(+), 4 deletions(-)
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/omap5.dtsi
>>>>> b/arch/arm/boot/dts/omap5.dtsi
>>>>> index 790bb2a..7a78d1b 100644
>>>>> --- a/arch/arm/boot/dts/omap5.dtsi
>>>>> +++ b/arch/arm/boot/dts/omap5.dtsi
>>>>> @@ -35,8 +35,12 @@
>>>>>    			compatible = "arm,cortex-a15";
>>>>>    			timer {
>>>>>    				compatible = "arm,armv7-timer";
>>>>> -				/* 14th PPI IRQ, active low level-sensitive */
>>>>> -				interrupts = <1 14 0x308>;
>>>>> +				/*
>>>>> +				 * PPI secure/nonsecure IRQ,
>>>>> +				 * active low level-sensitive
>>>>> +				 */
>>>>> +				interrupts = <1 13 0x308>,
>>>>> +					     <1 14 0x308>;
>>>>
>>>> Care to add the virtual and HYP timer interrupts? So KVM can get a
>>>> chance to run on this HW...
>>>>
>>> Thanks Marc for spotting it. Will take care of it.
>>
>> I just realised something silly... You have one timer node *per cpu*,
>> and this is not really expected.
>>
> This was discussed on the list here [1]
> Benoit suggested to add per CPU node since arch timer is per
> CPU and DT should describe the hw the way it is. Did we miss
> something ?

The current approach is not to duplicate banked resources. We do not have
duplicated twd-timer nodes on Cortex A9, we do not expose multiple CPU
interfaces for the GIC...

And speaking of the GIC: how do you interpret the CPU mask in the
interrupt field of the timer? The value 0x3xx in the third field is there
to indicate that CPU0 and CPU1 are getting interrupted by the timer. What
does it mean when you duplicate it?

        M.
-- 
Fast, cheap, reliable. Pick two.