Re: [PATCH 6/8] arm64: dts: qcom: eliza: Add GPU SMMU node

[Akhil P Oommen <akhilpo@oss.qualcomm.com>]

On 7/6/2026 4:38 PM, Konrad Dybcio wrote:
> On 7/6/26 1:07 PM, Konrad Dybcio wrote:
>> On 7/5/26 10:14 AM, Akhil P Oommen wrote:
>>> From: Abel Vesa <abel.vesa@oss.qualcomm.com>
>>>
>>> Add the nodes to describe the GPU SMMU.
>>>
>>> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
>>> Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
>>> ---
>>>  arch/arm64/boot/dts/qcom/eliza.dtsi | 38 +++++++++++++++++++++++++++++++++++++
>>>  1 file changed, 38 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/eliza.dtsi b/arch/arm64/boot/dts/qcom/eliza.dtsi
>>> index c5635f22e2a7..e5b8377e6c3a 100644
>>> --- a/arch/arm64/boot/dts/qcom/eliza.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/eliza.dtsi
>>> @@ -2674,6 +2674,44 @@ mdss_dp0_out: endpoint {
>>>  			};
>>>  		};
>>>  
>>> +		adreno_smmu: iommu@3da0000 {
>>> +			compatible = "qcom,eliza-smmu-500", "qcom,adreno-smmu",
>>> +				     "qcom,smmu-500", "arm,mmu-500";
>>> +			reg = <0x0 0x03da0000 0x0 0x40000>;
>>> +			#iommu-cells = <2>;
>>> +			#global-interrupts = <1>;
>>> +			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
>>
>> 674 is the correct globla
> 
> (modulo the issue i explained below)
> 
> [...]
> 
>> This list is not quite correct. It must be sorted by the context index,
>> to which a given interrupt corresponds to - the driver relies on that
>> to give you information about where a context fault happens
>>
>> Moreover, I see that the interrupt sheet has the bug where some
>> interrupts are offset by 32 from the base vector, and others are offset
>> by 31 (i.e. the SPI number doesn't equal irq vector - 32) - please find
>> out which mapping is correct with the right folks

I reviewed this and looks correct to me. Also, this matches the
downstream configuration. Did you confuse with Dest Port vs Vector ID in
the documentation?

-Akhil.

> 
> Konrad