From mboxrd@z Thu Jan 1 00:00:00 1970 From: sean.wang@mediatek.com (sean.wang at mediatek.com) Date: Fri, 23 Feb 2018 18:16:33 +0800 Subject: [PATCH v1 13/19] arm: dts: mt7623: move node mt6323 leds to mt6323.dtsi In-Reply-To: References: Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Sean Wang Since those LEDs are parts of PMIC MT6323, it is reasonable to merge those LEDs node definition back into mt6323.dtsi. This way can improve the reusability of those nodes among different boards with the same PMIC. Signed-off-by: Sean Wang Cc: Lee Jones --- arch/arm/boot/dts/mt6323.dtsi | 26 ++++++++++++++++++++++++- arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 28 --------------------------- 2 files changed, 25 insertions(+), 29 deletions(-) diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi index 7c783d6..44c5642 100644 --- a/arch/arm/boot/dts/mt6323.dtsi +++ b/arch/arm/boot/dts/mt6323.dtsi @@ -1,5 +1,5 @@ /* - * Copyright (c) 2017 MediaTek Inc. + * Copyright (c) 2017-2018 MediaTek Inc. * Author: John Crispin * Sean Wang * This program is free software; you can redistribute it and/or modify @@ -237,5 +237,29 @@ regulator-enable-ramp-delay = <216>; }; }; + + leds { + compatible = "mediatek,mt6323-led"; + #address-cells = <1>; + #size-cells = <0>; + + led at 0 { + reg = <0>; + label = "mt6323:isink:green"; + default-state = "off"; + }; + + led at 1 { + reg = <1>; + label = "mt6323:isink:red"; + default-state = "off"; + }; + + led at 2 { + reg = <2>; + label = "mt6323:isink:blue"; + default-state = "off"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 75e61c4..767b225 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -483,34 +483,6 @@ status = "okay"; }; -&pwrap { - mt6323 { - mt6323led: led { - compatible = "mediatek,mt6323-led"; - #address-cells = <1>; - #size-cells = <0>; - - led at 0 { - reg = <0>; - label = "bpi-r2:isink:green"; - default-state = "off"; - }; - - led at 1 { - reg = <1>; - label = "bpi-r2:isink:red"; - default-state = "off"; - }; - - led at 2 { - reg = <2>; - label = "bpi-r2:isink:blue"; - default-state = "off"; - }; - }; - }; -}; - &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi0_pins_a>; -- 2.7.4