From: slongerbeam@gmail.com (Steve Longerbeam)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 05/19] ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors
Date: Fri, 6 Jan 2017 16:25:14 -0800 [thread overview]
Message-ID: <e8f3329a-ff01-ae6d-a52d-32cb9bb10b2c@gmail.com> (raw)
In-Reply-To: <CAOMZO5CibSU45Cw1d8ZipiGSVfhCQ4uP4XiNuWTGLa5eHmC6Qg@mail.gmail.com>
On 01/04/2017 07:26 AM, Fabio Estevam wrote:
> On Tue, Jan 3, 2017 at 6:57 PM, Steve Longerbeam <slongerbeam@gmail.com> wrote:
>
>> + camera: ov5642 at 3c {
>> + compatible = "ovti,ov5642";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_ov5642>;
>> + clocks = <&clks IMX6QDL_CLK_CKO>;
>> + clock-names = "xclk";
>> + reg = <0x3c>;
>> + xclk = <24000000>;
>> + DOVDD-supply = <&vgen4_reg>; /* 1.8v */
>> + AVDD-supply = <&vgen5_reg>; /* 2.8v, rev C board is VGEN3
>> + rev B board is VGEN5 */
> Please use vgen3 so that by default we have the valid AVDD-supply for
> revC boards which is more recent and more the users have access to.
done.
>
>> + mipi_camera: ov5640 at 3c {
>> + compatible = "ovti,ov5640_mipi";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_ov5640>;
>> + reg = <0x3c>;
>> + clocks = <&clks IMX6QDL_CLK_CKO>;
>> + clock-names = "xclk";
>> + xclk = <24000000>;
>> + DOVDD-supply = <&vgen4_reg>; /* 1.8v */
>> + AVDD-supply = <&vgen5_reg>; /* 2.8v, rev C board is VGEN3
>> + rev B board is VGEN5 */
> Same here.
done.
>
>> + pinctrl_ov5640: ov5640grp {
>> + fsl,pins = <
>> + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x80000000
>> + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x80000000
> Please avoid all the 0x80000000 IOMUX settings and replace them by
> their real values.
yeah, finally got around to this, done!
Steve
next prev parent reply other threads:[~2017-01-07 0:25 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-03 20:57 [PATCH v2 00/19] i.MX Media Driver Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 01/19] ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 02/19] ARM: dts: imx6qdl: Add mipi_ipu1/2 multiplexers, mipi_csi, and their connections Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 03/19] ARM: dts: imx6qdl: add media device Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 04/19] ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors Steve Longerbeam
2017-01-04 12:25 ` Vladimir Zapolskiy
2017-01-05 19:20 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 05/19] ARM: dts: imx6-sabresd: " Steve Longerbeam
2017-01-04 12:33 ` Vladimir Zapolskiy
2017-01-05 22:30 ` Steve Longerbeam
2017-01-04 15:26 ` Fabio Estevam
2017-01-07 0:25 ` Steve Longerbeam [this message]
2017-01-03 20:57 ` [PATCH v2 06/19] ARM: dts: imx6-sabreauto: create i2cmux for i2c3 Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 07/19] ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 08/19] ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 09/19] ARM: dts: imx6-sabreauto: add the ADV7180 video decoder Steve Longerbeam
2017-01-04 12:41 ` Vladimir Zapolskiy
2017-01-05 22:31 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 11/19] media: imx: Add CSI subdev driver Steve Longerbeam
2017-01-04 13:44 ` Vladimir Zapolskiy
2017-01-06 18:05 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 12/19] media: imx: Add SMFC " Steve Longerbeam
2017-01-04 14:23 ` Vladimir Zapolskiy
2017-01-06 18:11 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 13/19] media: imx: Add IC subdev drivers Steve Longerbeam
2017-01-04 14:48 ` Vladimir Zapolskiy
2017-01-06 18:34 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 14/19] media: imx: Add Camera Interface subdev driver Steve Longerbeam
2017-01-04 14:55 ` Vladimir Zapolskiy
2017-01-06 18:42 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 15/19] media: imx: Add MIPI CSI-2 Receiver " Steve Longerbeam
2017-01-04 15:05 ` Vladimir Zapolskiy
2017-01-06 18:58 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 16/19] media: imx: Add video switch " Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 17/19] media: imx: Add MIPI CSI-2 OV5640 sensor " Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 19/19] ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers Steve Longerbeam
2017-01-03 21:10 ` [PATCH v2 00/19] i.MX Media Driver Fabio Estevam
[not found] ` <1483477049-19056-11-git-send-email-steve_longerbeam@mentor.com>
2017-01-04 13:33 ` [PATCH v2 10/19] media: Add i.MX media core driver Vladimir Zapolskiy
2017-01-06 1:21 ` Steve Longerbeam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e8f3329a-ff01-ae6d-a52d-32cb9bb10b2c@gmail.com \
--to=slongerbeam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).