From mboxrd@z Thu Jan 1 00:00:00 1970 From: scott.branden@broadcom.com (Scott Branden) Date: Thu, 20 Apr 2017 14:38:57 -0700 Subject: [PATCH] ARM: dts: bcm-cygnus: Add 911360's V3D device. In-Reply-To: <20170418233234.13374-1-eric@anholt.net> References: <20170418233234.13374-1-eric@anholt.net> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Looks good - thanks for getting the V3D open source code going on this SoC! On 17-04-18 04:32 PM, Eric Anholt wrote: > This loads the VC4 driver on the 911360_entphn platform (with the > corresponding series sent to dri-devel), which is supported by master > of the Mesa tree. > > Signed-off-by: Eric Anholt Acked-by: Scott Branden > --- > arch/arm/boot/dts/bcm-cygnus.dtsi | 13 +++++++++++++ > arch/arm/boot/dts/bcm911360_entphn.dts | 8 ++++++++ > 2 files changed, 21 insertions(+) > > diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi > index f52750c6d3ed..907a5e843364 100644 > --- a/arch/arm/boot/dts/bcm-cygnus.dtsi > +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi > @@ -406,6 +406,19 @@ > status = "disabled"; > }; > > + v3d: v3d at 180a2000 { > + compatible = "brcm,cygnus-v3d"; > + reg = <0x180a2000 0x1000>; > + clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>; > + clock-names = "v3d_clk"; > + interrupts = ; > + status = "disabled"; > + }; > + > + vc4: gpu { > + compatible = "brcm,cygnus-vc4"; > + }; > + > adc: adc at 180a6000 { > compatible = "brcm,iproc-static-adc"; > #io-channel-cells = <1>; > diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts > index 8b3800f46288..037621c13290 100644 > --- a/arch/arm/boot/dts/bcm911360_entphn.dts > +++ b/arch/arm/boot/dts/bcm911360_entphn.dts > @@ -57,6 +57,14 @@ > }; > }; > > +&v3d { > + assigned-clocks = > + <&mipipll BCM_CYGNUS_MIPIPLL>, > + <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>; > + assigned-clock-rates = <525000000>, <300000000>; > + status = "okay"; > +}; > + > &uart3 { > status = "okay"; > }; >