[PATCH 4/5] ARM: scu: Move register defines to header file

[santosh.shilimkar@ti.com (Santosh Shilimkar)]

> -----Original Message-----
> From: Russell King - ARM Linux [mailto:linux at arm.linux.org.uk]
> Sent: Friday, February 04, 2011 5:01 PM
> To: Santosh Shilimkar
> Cc: catalin.marinas at arm.com; linus.ml.walleij at gmail.com; linux-
> omap at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> ccross at android.com
> Subject: Re: [PATCH 4/5] ARM: scu: Move register defines to header
> file
>
> On Fri, Feb 04, 2011 at 04:16:07PM +0530, Santosh Shilimkar wrote:
> > > -----Original Message-----
> > > From: Russell King - ARM Linux [mailto:linux at arm.linux.org.uk]
> > > Sent: Friday, February 04, 2011 4:11 PM
> > > To: Santosh Shilimkar
> > > Cc: catalin.marinas at arm.com; linus.ml.walleij at gmail.com; linux-
> > > omap at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> > > ccross at android.com
> > > Subject: Re: [PATCH 4/5] ARM: scu: Move register defines to
> header
> > > file
> > >
> > > On Tue, Jan 25, 2011 at 11:53:35PM +0530, Santosh Shilimkar
> wrote:
> > > > After fixing the 3rd version for base address break, I was
> able to
> > > > use this patch and test it. Seems to work. SMC related stuff
> can
> > > > be ignored because OMAP4 ES1.0 doesn't have functional PM
> hardware
> > > > support.
> > >
> > > I think I'd prefer to do as the other functions do, and pass in
> the
> > > scu base address from the platform code.  It's potentially more
> > > efficient for platforms which have a fixed SCU base address.
> > Ok. I can fix that
>
Thanks. Will use this version then.

> 8<------
> Subject: [PATCH] ARM: smp: add function to set WFI low-power mode
> for SMP CPUs
>
> Add a function to set the SCU low-power mode for SMP CPUs.  This
> centralizes this functionality rather than having to expose the
> SCU register definitions to each platform.
>
> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> ---
>  arch/arm/include/asm/smp_scu.h |    5 +++++
>  arch/arm/kernel/smp_scu.c      |   24 ++++++++++++++++++++++++
>  2 files changed, 29 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/include/asm/smp_scu.h
> b/arch/arm/include/asm/smp_scu.h
> index 2376835..800860d 100644
> --- a/arch/arm/include/asm/smp_scu.h
> +++ b/arch/arm/include/asm/smp_scu.h
> @@ -1,7 +1,12 @@
>  #ifndef __ASMARM_ARCH_SCU_H
>  #define __ASMARM_ARCH_SCU_H
>
> +#define SCU_PM_NORMAL	0
> +#define SCU_PM_DORMANT	2
> +#define SCU_PM_POWEROFF	3
> +
>  unsigned int scu_get_core_count(void __iomem *);
>  void scu_enable(void __iomem *);
> +int scu_power_mode(void __iomem *, unsigned int);
>
>  #endif
> diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
> index 9ab4149..0ba329a 100644
> --- a/arch/arm/kernel/smp_scu.c
> +++ b/arch/arm/kernel/smp_scu.c
> @@ -50,3 +50,27 @@ void __init scu_enable(void __iomem *scu_base)
>  	 */
>  	flush_cache_all();
>  }
> +
> +/*
> + * Set the executing CPUs power mode as defined.  This will be in
> + * preparation for it executing a WFI instruction.
> + *
> + * This function must be called with preemption disabled, and as it
> + * has the side effect of disabling coherency, caches must have
> been
> + * flushed.  Interrupts must also have been disabled.
> + */
> +int scu_power_mode(void __iomem *scu_base, unsigned int mode)
> +{
> +	unsigned int val;
> +	int cpu = smp_processor_id();
> +	int shift;
> +
> +	if (mode > 3 || mode == 1 || cpu > 3)
> +		return -EINVAL;
> +
> +	val = __raw_readb(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
> +	val |= mode;
> +	__raw_writeb(val, scu_base + SCU_CPU_STATUS + cpu);
> +
> +	return 0;
> +}
> --
> 1.6.2.5