From: Andrew Lunn <andrew@lunn.ch>
To: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Shawn Guo <shawnguo@kernel.org>,
Martin Schmiedel <Martin.Schmiedel@tq-group.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux@ew.tq-group.com
Subject: Re: [PATCH v2 2/3] arm64: dts: freescale: add initial device tree for TQMa93xx/MBa93xxLA-MINI
Date: Thu, 19 Mar 2026 16:46:44 +0100 [thread overview]
Message-ID: <ea9038c3-7e7d-457b-a3fc-8d21e2744e32@lunn.ch> (raw)
In-Reply-To: <20260319125013.2421621-3-alexander.stein@ew.tq-group.com>
> +&eqos {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_eqos>;
> + phy-mode = "rgmii-id";
> + phy-handle = <ðphy_eqos>;
> + status = "okay";
> +
> + mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy_eqos: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_eqos_phy>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> + reset-gpios = <&expander0 0 GPIO_ACTIVE_LOW>;
> + reset-assert-us = <500000>;
> + reset-deassert-us = <50000>;
> + enet-phy-lane-no-swap;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> + ti,dp83867-rxctrl-strap-quirk;
> + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
> + };
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec>;
> + phy-mode = "rgmii-id";
> + phy-handle = <ðphy_fec>;
> + fsl,magic-packet;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clock-frequency = <5000000>;
> +
> + ethphy_fec: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec_phy>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
> + reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
> + reset-assert-us = <500000>;
> + reset-deassert-us = <50000>;
> + enet-phy-lane-no-swap;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> + ti,dp83867-rxctrl-strap-quirk;
> + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
> + };
> + };
> +};
For these nodes only:
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
next prev parent reply other threads:[~2026-03-19 15:46 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-19 12:50 [PATCH v2 0/3] TQMa93xx on MBa93xxLA-Mini support Alexander Stein
2026-03-19 12:50 ` [PATCH v2 1/3] dt-bindings: arm: fsl: add MBa93xxLA-MINI Alexander Stein
2026-03-19 16:47 ` Conor Dooley
2026-03-19 12:50 ` [PATCH v2 2/3] arm64: dts: freescale: add initial device tree for TQMa93xx/MBa93xxLA-MINI Alexander Stein
2026-03-19 15:46 ` Andrew Lunn [this message]
2026-03-19 12:50 ` [PATCH v2 3/3] arm64: dts: freescale: imx93-tqma9352-mba93xxla-mini: Add WLAN/BT overlay Alexander Stein
2026-03-25 16:07 ` (subset) [PATCH v2 0/3] TQMa93xx on MBa93xxLA-Mini support Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ea9038c3-7e7d-457b-a3fc-8d21e2744e32@lunn.ch \
--to=andrew@lunn.ch \
--cc=Frank.Li@nxp.com \
--cc=Martin.Schmiedel@tq-group.com \
--cc=alexander.stein@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@ew.tq-group.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox