Re: [PATCH v4 04/13] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings

[Neil Armstrong <neil.armstrong@linaro.org>]

On 13/05/2023 20:32, Krzysztof Kozlowski wrote:
> On 12/05/2023 15:11, Neil Armstrong wrote:
>> The Amlogic G12A, G12B & SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a),
>> with a custom glue managing the IP resets, clock and data input similar to the DW-HDMI Glue
>> on the same Amlogic SoCs.
> 
> Please wrap commit message according to Linux coding style / submission
> process (neither too early nor over the limit):
> https://elixir.bootlin.com/linux/v5.18-rc4/source/Documentation/process/submitting-patches.rst#L586

This message may be automatic, but context is always important when reviewing,
this commit message is a re-spin on v3 that was reviewed by rob but I decided to remove the review
tags since I added a new clock and did some other cleanups.

While the process describes "how the patch itself *should* be formatted", it's a best effort
and not a blocker.

I'll fix the wrapping since you pointed out, but referring to the submitting-patches.rst
file (from a very old v5.18-rc4 version) is kind of childish.

> 
> Subject: drop second/last, redundant "bindings". The "dt-bindings"
> prefix is already stating that these are bindings.
> 
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>> ---
>>   .../display/amlogic,meson-g12a-dw-mipi-dsi.yaml    | 117 +++++++++++++++++++++
>>   1 file changed, 117 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml
>> new file mode 100644
>> index 000000000000..8169c7e93ff5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml
>> @@ -0,0 +1,117 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +# Copyright 2020 BayLibre, SAS
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/display/amlogic,meson-g12a-dw-mipi-dsi.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Amlogic specific extensions to the Synopsys Designware MIPI DSI Host Controller
>> +
>> +maintainers:
>> +  - Neil Armstrong <neil.armstrong@linaro.org>
>> +
>> +description: |
>> +  The Amlogic Meson Synopsys Designware Integration is composed of
>> +  - A Synopsys DesignWare MIPI DSI Host Controller IP
>> +  - A TOP control block controlling the Clocks & Resets of the IP
>> +
>> +allOf:
>> +  - $ref: dsi-controller.yaml#
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - amlogic,meson-g12a-dw-mipi-dsi
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    minItems: 3
> 
> Missing maxItems

Ack

> 
>> +
>> +  clock-names:
>> +    minItems: 3
>> +    items:
>> +      - const: pclk
>> +      - const: bit_clk
>> +      - const: px_clk
>> +      - const: meas_clk
> 
> Drop _clk suffixes. pclk can stay, it's a bit odd but recently Rob
> clarified that suffix with underscore should not be there.

Ack

> 
>> +
>> +  resets:
>> +    minItems: 1
> 
> maxItems instead

Ack

> 
>> +
>> +  reset-names:
>> +    items:
>> +      - const: top
>> +
>> +  phys:
>> +    minItems: 1
> 
> Ditto

Ack

> 
>> +
>> +  phy-names:
>> +    items:
>> +      - const: dphy
>> +
>> +  ports:
>> +    $ref: /schemas/graph.yaml#/properties/ports
>> +
>> +    properties:
>> +      port@0:
>> +        $ref: /schemas/graph.yaml#/properties/port
>> +        description: Input node to receive pixel data.
>> +
>> +      port@1:
>> +        $ref: /schemas/graph.yaml#/properties/port
>> +        description: DSI output node to panel.
>> +
>> +    required:
>> +      - port@0
>> +      - port@1
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - clocks
>> +  - clock-names
>> +  - resets
>> +  - reset-names
>> +  - phys
>> +  - phy-names
>> +  - ports
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> +  - |
>> +    dsi@7000 {
>> +          compatible = "amlogic,meson-g12a-dw-mipi-dsi";
>> +          reg = <0x6000 0x400>;
> 
> Your reg does not match unit address. The dt_binding_check should
> actually complain about it.

Well, it doesn't, will fix

Thanks,
Neil

> 
> Best regards,
> Krzysztof
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel