From mboxrd@z Thu Jan  1 00:00:00 1970
From: marc.zyngier@arm.com (Marc Zyngier)
Date: Wed, 3 Jan 2018 17:14:04 +0000
Subject: [PATCH 0/3] irqchip: irq-bcm2836: add support for DT interrupt
 polarity
In-Reply-To: <60587e4d-d285-34e7-3d27-ea1daa1f97d1@i2se.com>
References: <1513024752-11246-1-git-send-email-stefan.wahren@i2se.com>
 <d0c81267-8379-d4a1-ec56-fec3492c1df6@i2se.com>
 <a7939fae-31d1-c743-5957-d88be98a0c63@arm.com>
 <60587e4d-d285-34e7-3d27-ea1daa1f97d1@i2se.com>
Message-ID: <eabfb7b6-a7ec-90a5-bb08-23e9787de227@arm.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 03/01/18 17:10, Stefan Wahren wrote:
> Hi Marc,
> 
> 
> Am 19.12.2017 um 17:36 schrieb Marc Zyngier:
>> On 19/12/17 07:02, Stefan Wahren wrote:
>>> Hi Marc,
>>>
>>> Am 11.12.2017 um 21:39 schrieb Stefan Wahren:
>>>> This patch series implements DT polarity support for the 1st level interrupt
>>>> controller.
>>>>
>>>> Stefan Wahren (3):
>>>>     dt-bindings: bcm2836-l1-intc: add interrupt polarity support
>>>>     irqchip: irq-bcm2836: add support for DT interrupt polarity
>>>>     ARM: dts: bcm283x: Define polarity of per-cpu interrupts
>>>>
>>>>    .../interrupt-controller/brcm,bcm2836-l1-intc.txt  |  4 +-
>>>>    arch/arm/boot/dts/bcm2836.dtsi                     | 14 +++----
>>>>    arch/arm/boot/dts/bcm2837.dtsi                     | 12 +++---
>>>>    arch/arm/boot/dts/bcm283x.dtsi                     |  1 +
>>>>    drivers/irqchip/irq-bcm2836.c                      | 46 +++++++++++++---------
>>>>    5 files changed, 44 insertions(+), 33 deletions(-)
>>>>
>>> is this series okay?
>> Yes, it does look good. I'll queue that for 4.16.
>>
>> Thanks,
>>
>> 	M.
> 
> since i didn't found this in linux-next, please take this as a gentle 
> reminder.

It will take some time before I push this to tglx, as I'm otherwise
engaged. Patches are not lost.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...