From: Claudiu.Beznea@microchip.com (Claudiu Beznea)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 08/10] pwm: pwm-omap-dmtimer: Adapt driver to utilize dmtimer pdata ops
Date: Mon, 8 Jan 2018 16:47:27 +0200 [thread overview]
Message-ID: <eb51e181-8203-0469-d013-dfd40f7da95d@microchip.com> (raw)
In-Reply-To: <3b52c42c-8283-c7b9-6f82-1187766faab1@baylibre.com>
On 08.01.2018 16:44, Neil Armstrong wrote:
> On 08/01/2018 15:33, Keerthy wrote:
>>
>>
>> On Monday 08 January 2018 02:14 PM, Claudiu Beznea wrote:
>>>
>>>
>>> On 02.01.2018 12:09, Keerthy wrote:
>>>> Adapt driver to utilize dmtimer pdata ops instead of pdata-quirks.
>>>>
>>>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>>>> Tested-by: Ladislav Michl <ladis@linux-mips.org>
>>>> ---
>>>> drivers/pwm/pwm-omap-dmtimer.c | 39 ++++++++++++++++++++++-----------------
>>>> 1 file changed, 22 insertions(+), 17 deletions(-)
>>>>
>>>> diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
>>>> index 5ad42f3..3b27aff 100644
>>>> --- a/drivers/pwm/pwm-omap-dmtimer.c
>>>> +++ b/drivers/pwm/pwm-omap-dmtimer.c
>>>> @@ -23,6 +23,7 @@
>>>> #include <linux/mutex.h>
>>>> #include <linux/of.h>
>>>> #include <linux/of_platform.h>
>>>> +#include <linux/platform_data/dmtimer-omap.h>
>>>> #include <linux/platform_data/pwm_omap_dmtimer.h>
>>>> #include <linux/platform_device.h>
>>>> #include <linux/pm_runtime.h>
>>>> @@ -37,7 +38,7 @@ struct pwm_omap_dmtimer_chip {
>>>> struct pwm_chip chip;
>>>> struct mutex mutex;
>>>> pwm_omap_dmtimer *dm_timer;
>>>> - struct pwm_omap_dmtimer_pdata *pdata;
>>>> + struct omap_dm_timer_ops *pdata;
>>>> struct platform_device *dm_timer_pdev;
>>>> };
>>>>
>>>> @@ -242,19 +243,33 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
>>>> {
>>>> struct device_node *np = pdev->dev.of_node;
>>>> struct device_node *timer;
>>>> + struct platform_device *timer_pdev;
>>>> struct pwm_omap_dmtimer_chip *omap;
>>>> - struct pwm_omap_dmtimer_pdata *pdata;
>>>> + struct dmtimer_platform_data *timer_pdata;
>>>> + struct omap_dm_timer_ops *pdata;
>>>> pwm_omap_dmtimer *dm_timer;
>>>> u32 v;
>>>> int status;
>>>>
>>>> - pdata = dev_get_platdata(&pdev->dev);
>>>> - if (!pdata) {
>>>> - dev_err(&pdev->dev, "Missing dmtimer platform data\n");
>>>> + timer = of_parse_phandle(np, "ti,timers", 0);
>>> of_node_put() should be called when done with device_node pointer returned
>>> by of_parse_phandle() (you may want to check the return ERROR cases below
>>> regarding this statement):
>>>> + if (!timer)
>>>> + return -ENODEV;
>>>> +
>>>> + timer_pdev = of_find_device_by_node(timer);
>>>> + if (!timer_pdev) {
>>>> + dev_err(&pdev->dev, "Unable to find Timer pdev\n");
>>> here
>>>> + return -ENODEV;
>>>> + }
>>>> +
>>>> + timer_pdata = dev_get_platdata(&timer_pdev->dev);
>>>> + if (!timer_pdata) {
>>>> + dev_err(&pdev->dev, "dmtimer pdata structure NULL\n");
>>> here
>>>> return -EINVAL;
>>>> }
>>>>
>>>> - if (!pdata->request_by_node ||
>>>> + pdata = timer_pdata->timer_ops;
>>>> +
>>>> + if (!pdata || !pdata->request_by_node ||
>>>> !pdata->free ||
>>>> !pdata->enable ||
>>>> !pdata->disable ||
>>>> @@ -270,10 +285,6 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
>>>> return -EINVAL;
>>>> }
>>>>
>>>> - timer = of_parse_phandle(np, "ti,timers", 0);
>>>> - if (!timer)
>>>> - return -ENODEV;
>>>> -
>>>> if (!of_get_property(timer, "ti,timer-pwm", NULL)) {
>>> here
>>>> dev_err(&pdev->dev, "Missing ti,timer-pwm capability\n");
>>>> return -ENODEV;
>>>> @@ -291,13 +302,7 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
>>>>
>>>> omap->pdata = pdata;
>>>> omap->dm_timer = dm_timer;
>>>> -
>>>> - omap->dm_timer_pdev = of_find_device_by_node(timer);
>>>> - if (!omap->dm_timer_pdev) {
>>>> - dev_err(&pdev->dev, "Unable to find timer pdev\n");
>>>> - omap->pdata->free(dm_timer);
>>>> - return -EINVAL;
>>>> - }
>>>> + omap->dm_timer_pdev = timer_pdev;
>>>>
>>>> /*
>>>> * Ensure that the timer is stopped before we allow PWM core to call
>>>>
>>> And all the other return instructions from probe function not listed by git diff
>>
>> Thanks for reviewing. I will add the of_node_put call for all the error
>> paths.
After that you can add: Reviwed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>>
>>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
>
> Apart the missing of_node_put() :
>
> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
>
next prev parent reply other threads:[~2018-01-08 14:47 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-02 10:09 [PATCH v6 00/10] omap: dmtimer: Move driver out of plat-omap Keerthy
2018-01-02 10:09 ` [PATCH v6 01/10] clocksource: dmtimer: Remove all the exports Keerthy
2018-01-02 10:09 ` [PATCH v6 02/10] arm: omap: timer: Wrap the inline functions under OMAP2PLUS define Keerthy
2018-01-02 10:09 ` [PATCH v6 03/10] arm: omap: Move dmtimer.h out of plat-omap Keerthy
2018-01-02 10:09 ` [PATCH v6 04/10] arm: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource Keerthy
2018-01-02 10:09 ` [PATCH v6 05/10] dmtimer: Add timer ops to the platform data structure Keerthy
2018-01-02 10:09 ` [PATCH v6 06/10] clocksource: dmtimer: Populate the timer ops to the pdata Keerthy
2018-01-02 10:09 ` [PATCH v6 07/10] clocksource: timer-dm: Hook device platform data if not already assigned Keerthy
2018-01-02 10:09 ` [PATCH v6 08/10] pwm: pwm-omap-dmtimer: Adapt driver to utilize dmtimer pdata ops Keerthy
2018-01-08 8:44 ` Claudiu Beznea
2018-01-08 14:33 ` Keerthy
2018-01-08 14:44 ` Neil Armstrong
2018-01-08 14:47 ` Claudiu Beznea [this message]
2018-01-08 16:24 ` Keerthy
2018-01-02 10:09 ` [PATCH v6 09/10] arm: omap: pdata-quirks: Remove unused timer pdata Keerthy
2018-01-02 10:09 ` [PATCH v6 10/10] clocksource: timer-dm: Check prescaler value Keerthy
2018-01-04 22:47 ` Ladislav Michl
2018-01-07 15:56 ` Keerthy
2018-01-07 19:26 ` Ladislav Michl
2018-01-07 15:59 ` [PATCH v6 00/10] omap: dmtimer: Move driver out of plat-omap Keerthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=eb51e181-8203-0469-d013-dfd40f7da95d@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).