Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: andre.przywara@arm.com (Andre Przywara)
To: linux-arm-kernel@lists.infradead.org
Subject: [linux-sunxi] [PATCH 1/7] pinctrl: sunxi: add support for pin controllers without bus gate
Date: Thu, 11 Jan 2018 11:48:40 +0000	[thread overview]
Message-ID: <ef82983f-6f91-46c2-1f67-7d4efc10c905@arm.com> (raw)
In-Reply-To: <20180106042326.46519-1-icenowy@aosc.io>

Hi,

another take to avoid this patch at all, I just remembered this from an
IRC discussion before:

On 06/01/18 04:23, Icenowy Zheng wrote:
> The Allwinner H6 pin controllers (both the main one and the CPUs one)
> have no bus gate clocks.

I don't think this is true. The pin controller *needs* an APB clock,
it's just not gate-able or not exposed or documented.
The "system bus tree" on page 90 in the manual shows that the "GPIO"
block is located on the APB1 bus.
So can't we just reference this apb clock directly? That would be much
cleaner, "more" correct and require less changes: "The best patch is no
patch":

	clocks = <&ccu APB1>, <&osc24M>, <&osc32k>;
	/* or whatever this APB clock is actually called. */
	clock-names = "apb", "hosc", "losc";

Cheers,
Andre.

> 
> Add support for this kind of pin controllers.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
>  drivers/pinctrl/sunxi/pinctrl-sunxi.c | 30 ++++++++++++++++++++----------
>  drivers/pinctrl/sunxi/pinctrl-sunxi.h |  1 +
>  2 files changed, 21 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> index 4b6cb25bc796..68cd505679d9 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> @@ -1182,7 +1182,12 @@ static int sunxi_pinctrl_setup_debounce(struct sunxi_pinctrl *pctl,
>  	unsigned int hosc_div, losc_div;
>  	struct clk *hosc, *losc;
>  	u8 div, src;
> -	int i, ret;
> +	int i, ret, clk_count;
> +
> +	if (pctl->desc->without_bus_gate)
> +		clk_count = 2;
> +	else
> +		clk_count = 3;
>  
>  	/* Deal with old DTs that didn't have the oscillators */
>  	if (of_count_phandle_with_args(node, "clocks", "#clock-cells") != 3)
> @@ -1360,15 +1365,19 @@ int sunxi_pinctrl_init_with_variant(struct platform_device *pdev,
>  			goto gpiochip_error;
>  	}
>  
> -	clk = devm_clk_get(&pdev->dev, NULL);
> -	if (IS_ERR(clk)) {
> -		ret = PTR_ERR(clk);
> -		goto gpiochip_error;
> -	}
> +	if (!desc->without_bus_gate) {
> +		clk = devm_clk_get(&pdev->dev, NULL);
> +		if (IS_ERR(clk)) {
> +			ret = PTR_ERR(clk);
> +			goto gpiochip_error;
> +		}
>  
> -	ret = clk_prepare_enable(clk);
> -	if (ret)
> -		goto gpiochip_error;
> +		ret = clk_prepare_enable(clk);
> +		if (ret)
> +			goto gpiochip_error;
> +	} else {
> +		clk = NULL;
> +	}
>  
>  	pctl->irq = devm_kcalloc(&pdev->dev,
>  				 pctl->desc->irq_banks,
> @@ -1425,7 +1434,8 @@ int sunxi_pinctrl_init_with_variant(struct platform_device *pdev,
>  	return 0;
>  
>  clk_error:
> -	clk_disable_unprepare(clk);
> +	if (clk)
> +		clk_disable_unprepare(clk);
>  gpiochip_error:
>  	gpiochip_remove(pctl->chip);
>  	return ret;
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
> index 11b128f54ed2..ccb6230f0bb5 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
> +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
> @@ -113,6 +113,7 @@ struct sunxi_pinctrl_desc {
>  	unsigned			irq_bank_base;
>  	bool				irq_read_needs_mux;
>  	bool				disable_strict_mode;
> +	bool				without_bus_gate;
>  };
>  
>  struct sunxi_pinctrl_function {
> 

  parent reply	other threads:[~2018-01-11 11:48 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-06  4:23 [PATCH 1/7] pinctrl: sunxi: add support for pin controllers without bus gate Icenowy Zheng
2018-01-06  4:23 ` [PATCH 2/7] pinctrl: sunxi: support pin controllers with holes among IRQ banks Icenowy Zheng
2018-01-06  4:23 ` [PATCH 3/7] pinctrl: sunxi: add support for the Allwinner H6 main pin controller Icenowy Zheng
2018-01-11 20:24   ` Rob Herring
2018-01-11 10:08 ` [linux-sunxi] [PATCH 1/7] pinctrl: sunxi: add support for pin controllers without bus gate Andre Przywara
2018-01-11 10:14   ` Chen-Yu Tsai
2018-01-11 10:23     ` Andre Przywara
2018-01-11 10:41       ` Maxime Ripard
2018-01-11 10:43         ` Icenowy Zheng
2018-01-11 11:48         ` Andre Przywara
2018-01-11 10:15   ` Icenowy Zheng
2018-01-11 10:41     ` Andre Przywara
2018-01-11 11:48 ` Andre Przywara [this message]
2018-01-11 13:21   ` Icenowy Zheng
2018-01-12  8:51     ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ef82983f-6f91-46c2-1f67-7d4efc10c905@arm.com \
    --to=andre.przywara@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox