From mboxrd@z Thu Jan  1 00:00:00 1970
From: alexandre.torgue@st.com (Alexandre Torgue)
Date: Mon, 9 Jan 2017 15:46:04 +0100
Subject: [PATCH 1/3] ARM: configs: stm32: enable ADC driver
In-Reply-To: <1480687022-12851-2-git-send-email-fabrice.gasnier@st.com>
References: <1480687022-12851-1-git-send-email-fabrice.gasnier@st.com>
 <1480687022-12851-2-git-send-email-fabrice.gasnier@st.com>
Message-ID: <f28799ba-c6ca-4c54-37fa-b718c85207ad@st.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi Fabrice

On 12/02/2016 02:57 PM, Fabrice GASNIER wrote:
> ADC driver depends on REGULATOR and IIO that are not yet selected.
> Current hardware boards (like stm32f429i-eval) is using fixed
> regulators.
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
> ---
>  arch/arm/configs/stm32_defconfig | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
> index a60b5cb..92ccc3c 100644
> --- a/arch/arm/configs/stm32_defconfig
> +++ b/arch/arm/configs/stm32_defconfig
> @@ -49,6 +49,8 @@ CONFIG_SERIAL_STM32=y
>  CONFIG_SERIAL_STM32_CONSOLE=y
>  # CONFIG_HW_RANDOM is not set
>  # CONFIG_HWMON is not set
> +CONFIG_REGULATOR=y
> +CONFIG_REGULATOR_FIXED_VOLTAGE=y
>  # CONFIG_USB_SUPPORT is not set
>  CONFIG_NEW_LEDS=y
>  CONFIG_LEDS_CLASS=y
> @@ -57,6 +59,9 @@ CONFIG_LEDS_TRIGGERS=y
>  CONFIG_LEDS_TRIGGER_HEARTBEAT=y
>  CONFIG_DMADEVICES=y
>  CONFIG_STM32_DMA=y
> +CONFIG_IIO=y
> +CONFIG_STM32_ADC_CORE=y
> +CONFIG_STM32_ADC=y
>  # CONFIG_FILE_LOCKING is not set
>  # CONFIG_DNOTIFY is not set
>  # CONFIG_INOTIFY_USER is not set
>

Applied on stm32-defconfig-for-v4.11

Thanks.

Alex