[PATCH v3 0/3] MediaTek clocks: Support mux indices list and 8195 DP

[PATCH v3 0/3] MediaTek clocks: Support mux indices list and 8195 DP

[AngeloGioacchino Del Regno]

Changes in v3:
 - Rebased on next-20231025
 - Added comment in the code explaining why the dp/edp parents lists
   are split in one PLL per interface
 - Added a commit performing the same reparenting on MT8188 as well

Changes in v2:
 - Rebased on next-20231018

This series adds support to specify custom parent indices for MediaTek
MUX clocks, necessary to avoid setting the same parent PLL for MT8195's
top_dp and top_edp clocks, solving DP+eDP concurrent output issues.

No fixes tags are provided as the clk-mux commit introduces new logic
and the actual MT8195 fix depends on that.

This commit was tested on the Acer Tomato Chromebook (MT8195) with
dual concurrent display outputs (internal eDP panel and TypeC->DP->HDMI
adapter connected to Samsung UE40JU6400 4k TV); resolution switch on
DP was also tested; eDP output is not paused and internal display keeps
working as expected.


After feedback on v1 of this series (effectively the same as v2, except
for the rebase), I looked for an alternative solution with using
clk_set_rate_exclusive() as proposed. Couldn't find any, as that still
doesn't give any guarantee about selecting the same PLL that the driver
was manipulating before setting the right divider MUX, hence that still
wouldn't work correctly.

For more context, please look at the conversation at [1].

Cheers!

[1] https://lore.kernel.org/linux-arm-kernel/20230713072138.84117-1-angelogioacchino.delregno@collabora.com

AngeloGioacchino Del Regno (3):
  clk: mediatek: clk-mux: Support custom parent indices for muxes
  clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
  clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes

 drivers/clk/mediatek/clk-mt8188-topckgen.c | 27 +++++++-------
 drivers/clk/mediatek/clk-mt8195-topckgen.c | 27 ++++++++++----
 drivers/clk/mediatek/clk-mux.c             | 14 +++++++
 drivers/clk/mediatek/clk-mux.h             | 43 ++++++++++++++++++++--
 4 files changed, 86 insertions(+), 25 deletions(-)

-- 
2.42.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 1/3] clk: mediatek: clk-mux: Support custom parent indices for muxes

[AngeloGioacchino Del Regno]

Add support for customized parent indices for MediaTek muxes: this is
necessary for the case in which we want to exclude some clocks from
a mux's parent clocks list, where the exclusions are not from the
very bottom of the list but either in the middle or the beginning.

Example:
- MUX1 (all parents)
  - parent1; idx=0
  - parent2; idx=1
  - parent3; idx=2

- MUX1 (wanted parents)
  - parent1; idx=0
  - parent3; idx=2

To achieve that add a `parent_index` array pointer to struct mtk_mux,
then in .set_parent(), .get_parent() callbacks check if this array
was populated and eventually get the index from that.

Also, to avoid updating all clock drivers for all SoCs, rename the
"main" macro to __GATE_CLR_SET_UPD_FLAGS (so, `__` was added) and
add the new member to it; furthermore, GATE_CLK_SET_UPD_FLAGS has
been reintroduced as being fully compatible with the older version.

The new parent_index can be specified with the new `_INDEXED`
variants of the MUX_GATE_CLR_SET_UPD_xxxx macros.

Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/clk/mediatek/clk-mux.c | 14 +++++++++++
 drivers/clk/mediatek/clk-mux.h | 43 ++++++++++++++++++++++++++++++----
 2 files changed, 53 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/mediatek/clk-mux.c b/drivers/clk/mediatek/clk-mux.c
index c93bc7f926e5..60990296450b 100644
--- a/drivers/clk/mediatek/clk-mux.c
+++ b/drivers/clk/mediatek/clk-mux.c
@@ -89,6 +89,17 @@ static u8 mtk_clk_mux_get_parent(struct clk_hw *hw)
 	regmap_read(mux->regmap, mux->data->mux_ofs, &val);
 	val = (val >> mux->data->mux_shift) & mask;
 
+	if (mux->data->parent_index) {
+		int i;
+
+		for (i = 0; i < mux->data->num_parents; i++)
+			if (mux->data->parent_index[i] == val)
+				return i;
+
+		/* Not found: return an impossible index to generate error */
+		return mux->data->num_parents + 1;
+	}
+
 	return val;
 }
 
@@ -104,6 +115,9 @@ static int mtk_clk_mux_set_parent_setclr_lock(struct clk_hw *hw, u8 index)
 	else
 		__acquire(mux->lock);
 
+	if (mux->data->parent_index)
+		index = mux->data->parent_index[index];
+
 	regmap_read(mux->regmap, mux->data->mux_ofs, &orig);
 	val = (orig & ~(mask << mux->data->mux_shift))
 			| (index << mux->data->mux_shift);
diff --git a/drivers/clk/mediatek/clk-mux.h b/drivers/clk/mediatek/clk-mux.h
index 7ecb963b0ec6..943ad1d7ce4b 100644
--- a/drivers/clk/mediatek/clk-mux.h
+++ b/drivers/clk/mediatek/clk-mux.h
@@ -21,6 +21,7 @@ struct mtk_mux {
 	int id;
 	const char *name;
 	const char * const *parent_names;
+	const u8 *parent_index;
 	unsigned int flags;
 
 	u32 mux_ofs;
@@ -37,9 +38,10 @@ struct mtk_mux {
 	signed char num_parents;
 };
 
-#define GATE_CLR_SET_UPD_FLAGS(_id, _name, _parents, _mux_ofs,		\
-			_mux_set_ofs, _mux_clr_ofs, _shift, _width,	\
-			_gate, _upd_ofs, _upd, _flags, _ops) {		\
+#define __GATE_CLR_SET_UPD_FLAGS(_id, _name, _parents, _paridx,		\
+			 _num_parents, _mux_ofs, _mux_set_ofs,		\
+			 _mux_clr_ofs, _shift, _width, _gate, _upd_ofs,	\
+			 _upd, _flags, _ops) {				\
 		.id = _id,						\
 		.name = _name,						\
 		.mux_ofs = _mux_ofs,					\
@@ -51,11 +53,28 @@ struct mtk_mux {
 		.gate_shift = _gate,					\
 		.upd_shift = _upd,					\
 		.parent_names = _parents,				\
-		.num_parents = ARRAY_SIZE(_parents),			\
+		.parent_index = _paridx,				\
+		.num_parents = _num_parents,				\
 		.flags = _flags,					\
 		.ops = &_ops,						\
 	}
 
+#define GATE_CLR_SET_UPD_FLAGS(_id, _name, _parents, _mux_ofs,		\
+			_mux_set_ofs, _mux_clr_ofs, _shift, _width,	\
+			_gate, _upd_ofs, _upd, _flags, _ops)		\
+		__GATE_CLR_SET_UPD_FLAGS(_id, _name, _parents,		\
+			NULL, ARRAY_SIZE(_parents), _mux_ofs,		\
+			_mux_set_ofs, _mux_clr_ofs, _shift, _width,	\
+			_gate, _upd_ofs, _upd, _flags, _ops)		\
+
+#define GATE_CLR_SET_UPD_FLAGS_INDEXED(_id, _name, _parents, _paridx,	\
+			 _mux_ofs, _mux_set_ofs, _mux_clr_ofs, _shift,	\
+			 _width, _gate, _upd_ofs, _upd, _flags, _ops)	\
+		__GATE_CLR_SET_UPD_FLAGS(_id, _name, _parents,		\
+			_paridx, ARRAY_SIZE(_paridx), _mux_ofs,		\
+			_mux_set_ofs, _mux_clr_ofs, _shift, _width,	\
+			_gate, _upd_ofs, _upd, _flags, _ops)		\
+
 extern const struct clk_ops mtk_mux_clr_set_upd_ops;
 extern const struct clk_ops mtk_mux_gate_clr_set_upd_ops;
 
@@ -67,6 +86,14 @@ extern const struct clk_ops mtk_mux_gate_clr_set_upd_ops;
 			_gate, _upd_ofs, _upd, _flags,			\
 			mtk_mux_gate_clr_set_upd_ops)
 
+#define MUX_GATE_CLR_SET_UPD_FLAGS_INDEXED(_id, _name, _parents,	\
+			_paridx, _mux_ofs, _mux_set_ofs, _mux_clr_ofs,	\
+			_shift, _width, _gate, _upd_ofs, _upd, _flags)	\
+		GATE_CLR_SET_UPD_FLAGS_INDEXED(_id, _name, _parents,	\
+			_paridx, _mux_ofs, _mux_set_ofs, _mux_clr_ofs,	\
+			_shift, _width, _gate, _upd_ofs, _upd, _flags,	\
+			mtk_mux_gate_clr_set_upd_ops)
+
 #define MUX_GATE_CLR_SET_UPD(_id, _name, _parents, _mux_ofs,		\
 			_mux_set_ofs, _mux_clr_ofs, _shift, _width,	\
 			_gate, _upd_ofs, _upd)				\
@@ -75,6 +102,14 @@ extern const struct clk_ops mtk_mux_gate_clr_set_upd_ops;
 			_width, _gate, _upd_ofs, _upd,			\
 			CLK_SET_RATE_PARENT)
 
+#define MUX_GATE_CLR_SET_UPD_INDEXED(_id, _name, _parents, _paridx,	\
+			_mux_ofs, _mux_set_ofs, _mux_clr_ofs, _shift,	\
+			_width, _gate, _upd_ofs, _upd)			\
+		MUX_GATE_CLR_SET_UPD_FLAGS_INDEXED(_id, _name,		\
+			_parents, _paridx, _mux_ofs, _mux_set_ofs,	\
+			_mux_clr_ofs, _shift, _width, _gate, _upd_ofs,	\
+			_upd, CLK_SET_RATE_PARENT)
+
 #define MUX_CLR_SET_UPD(_id, _name, _parents, _mux_ofs,			\
 			_mux_set_ofs, _mux_clr_ofs, _shift, _width,	\
 			_upd_ofs, _upd)					\
-- 
2.42.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 2/3] clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes

[AngeloGioacchino Del Regno]

The top_dp and top_edp muxes can be both parented to either TVDPLL1
or TVDPLL2, two identically specced PLLs for the specific purpose of
giving out pixel clock: this becomes a problem when the MediaTek
DisplayPort Interface (DPI) driver tries to set the pixel clock rate.

In the usecase of two simultaneous outputs (using two controllers),
it was seen that one of the displays would sometimes display garbled
output (if any at all) and this was because:
 - top_edp was set to TVDPLL1, outputting X GHz
 - top_dp was set to TVDPLL2, outputting Y GHz
   - mtk_dpi calls clk_set_rate(top_edp, Z GHz)
     - top_dp is switched to TVDPLL1
     - TVDPLL1 changes its rate, top_edp outputs the wrong rate.
     - eDP display is garbled

To solve this issue, remove all TVDPLL1 parents from `top_dp` and
all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
able to use the right bit index for the new parents list.

Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/clk/mediatek/clk-mt8195-topckgen.c | 27 +++++++++++++++-------
 1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/mediatek/clk-mt8195-topckgen.c b/drivers/clk/mediatek/clk-mt8195-topckgen.c
index 5c426a1c94c7..8f713a3341a9 100644
--- a/drivers/clk/mediatek/clk-mt8195-topckgen.c
+++ b/drivers/clk/mediatek/clk-mt8195-topckgen.c
@@ -415,17 +415,28 @@ static const char * const pwrmcu_parents[] = {
 	"mainpll_d4_d2"
 };
 
+/*
+ * Both DP/eDP can be parented to TVDPLL1 and TVDPLL2, but we force using
+ * TVDPLL1 on eDP and TVDPLL2 on DP to avoid changing the "other" PLL rate
+ * in dual output case, which would lead to corruption of functionality loss.
+ */
 static const char * const dp_parents[] = {
 	"clk26m",
-	"tvdpll1_d2",
 	"tvdpll2_d2",
-	"tvdpll1_d4",
 	"tvdpll2_d4",
-	"tvdpll1_d8",
 	"tvdpll2_d8",
-	"tvdpll1_d16",
 	"tvdpll2_d16"
 };
+static const u8 dp_parents_idx[] = { 0, 2, 4, 6, 8 };
+
+static const char * const edp_parents[] = {
+	"clk26m",
+	"tvdpll1_d2",
+	"tvdpll1_d4",
+	"tvdpll1_d8",
+	"tvdpll1_d16"
+};
+static const u8 edp_parents_idx[] = { 0, 1, 3, 5, 7 };
 
 static const char * const disp_pwm_parents[] = {
 	"clk26m",
@@ -957,11 +968,11 @@ static const struct mtk_mux top_mtk_muxes[] = {
 	MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_PWRMCU, "top_pwrmcu",
 		pwrmcu_parents, 0x08C, 0x090, 0x094, 16, 3, 23, 0x08, 6,
 		CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-	MUX_GATE_CLR_SET_UPD(CLK_TOP_DP, "top_dp",
-		dp_parents, 0x08C, 0x090, 0x094, 24, 4, 31, 0x08, 7),
+	MUX_GATE_CLR_SET_UPD_INDEXED(CLK_TOP_DP, "top_dp",
+		dp_parents, dp_parents_idx, 0x08C, 0x090, 0x094, 24, 4, 31, 0x08, 7),
 	/* CLK_CFG_10 */
-	MUX_GATE_CLR_SET_UPD(CLK_TOP_EDP, "top_edp",
-		dp_parents, 0x098, 0x09C, 0x0A0, 0, 4, 7, 0x08, 8),
+	MUX_GATE_CLR_SET_UPD_INDEXED(CLK_TOP_EDP, "top_edp",
+		edp_parents, edp_parents_idx, 0x098, 0x09C, 0x0A0, 0, 4, 7, 0x08, 8),
 	MUX_GATE_CLR_SET_UPD(CLK_TOP_DPI, "top_dpi",
 		dp_parents, 0x098, 0x09C, 0x0A0, 8, 4, 15, 0x08, 9),
 	MUX_GATE_CLR_SET_UPD(CLK_TOP_DISP_PWM0, "top_disp_pwm0",
-- 
2.42.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 3/3] clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes

[AngeloGioacchino Del Regno]

The top_dp and top_edp muxes can be both parented to either TVDPLL1
or TVDPLL2, two identically specced PLLs for the specific purpose of
giving out pixel clock: this becomes a problem when the MediaTek
DisplayPort Interface (DPI) driver tries to set the pixel clock rate.

In the usecase of two simultaneous outputs (using two controllers),
it was seen that one of the displays would sometimes display garbled
output (if any at all) and this was because:
 - top_edp was set to TVDPLL1, outputting X GHz
 - top_dp was set to TVDPLL2, outputting Y GHz
   - mtk_dpi calls clk_set_rate(top_edp, Z GHz)
 - top_dp is switched to TVDPLL1
 - TVDPLL1 changes its rate, top_edp outputs the wrong rate.
 - eDP display is garbled

To solve this issue, remove all TVDPLL1 parents from `top_dp` and
all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
able to use the right bit index for the new parents list.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/clk/mediatek/clk-mt8188-topckgen.c | 27 +++++++++++-----------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/clk/mediatek/clk-mt8188-topckgen.c b/drivers/clk/mediatek/clk-mt8188-topckgen.c
index e330a4f9a0c3..f7ec599b20af 100644
--- a/drivers/clk/mediatek/clk-mt8188-topckgen.c
+++ b/drivers/clk/mediatek/clk-mt8188-topckgen.c
@@ -475,29 +475,28 @@ static const char * const sspm_parents[] = {
 	"mainpll_d4_d2"
 };
 
+/*
+ * Both DP/eDP can be parented to TVDPLL1 and TVDPLL2, but we force using
+ * TVDPLL1 on eDP and TVDPLL2 on DP to avoid changing the "other" PLL rate
+ * in dual output case, which would lead to corruption of functionality loss.
+ */
 static const char * const dp_parents[] = {
 	"clk26m",
-	"tvdpll1_d2",
 	"tvdpll2_d2",
-	"tvdpll1_d4",
 	"tvdpll2_d4",
-	"tvdpll1_d8",
 	"tvdpll2_d8",
-	"tvdpll1_d16",
 	"tvdpll2_d16"
 };
+static const u8 dp_parents_idx[] = { 0, 2, 4, 6, 8 };
 
 static const char * const edp_parents[] = {
 	"clk26m",
 	"tvdpll1_d2",
-	"tvdpll2_d2",
 	"tvdpll1_d4",
-	"tvdpll2_d4",
 	"tvdpll1_d8",
-	"tvdpll2_d8",
-	"tvdpll1_d16",
-	"tvdpll2_d16"
+	"tvdpll1_d16"
 };
+static const u8 edp_parents_idx[] = { 0, 1, 3, 5, 7 };
 
 static const char * const dpi_parents[] = {
 	"clk26m",
@@ -1038,10 +1037,12 @@ static const struct mtk_mux top_mtk_muxes[] = {
 	MUX_GATE_CLR_SET_UPD(CLK_TOP_SSPM, "top_sspm",
 			     sspm_parents, 0x080, 0x084, 0x088, 24, 4, 31, 0x08, 3),
 	/* CLK_CFG_9 */
-	MUX_GATE_CLR_SET_UPD(CLK_TOP_DP, "top_dp",
-			     dp_parents, 0x08C, 0x090, 0x094, 0, 4, 7, 0x08, 4),
-	MUX_GATE_CLR_SET_UPD(CLK_TOP_EDP, "top_edp",
-			     edp_parents, 0x08C, 0x090, 0x094, 8, 4, 15, 0x08, 5),
+	MUX_GATE_CLR_SET_UPD_INDEXED(CLK_TOP_DP, "top_dp",
+				     dp_parents, dp_parents_idx, 0x08C, 0x090, 0x094,
+				     0, 4, 7, 0x08, 4),
+	MUX_GATE_CLR_SET_UPD_INDEXED(CLK_TOP_EDP, "top_edp",
+				     edp_parents, edp_parents_idx, 0x08C, 0x090, 0x094,
+				     8, 4, 15, 0x08, 5),
 	MUX_GATE_CLR_SET_UPD(CLK_TOP_DPI, "top_dpi",
 			     dpi_parents, 0x08C, 0x090, 0x094, 16, 4, 23, 0x08, 6),
 	MUX_GATE_CLR_SET_UPD(CLK_TOP_DISP_PWM0, "top_disp_pwm0",
-- 
2.42.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 3/3] clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes

[Alexandre Mergnat]

On 03/11/2023 11:25, AngeloGioacchino Del Regno wrote:
> The top_dp and top_edp muxes can be both parented to either TVDPLL1
> or TVDPLL2, two identically specced PLLs for the specific purpose of
> giving out pixel clock: this becomes a problem when the MediaTek
> DisplayPort Interface (DPI) driver tries to set the pixel clock rate.
> 
> In the usecase of two simultaneous outputs (using two controllers),
> it was seen that one of the displays would sometimes display garbled
> output (if any at all) and this was because:
>   - top_edp was set to TVDPLL1, outputting X GHz
>   - top_dp was set to TVDPLL2, outputting Y GHz
>     - mtk_dpi calls clk_set_rate(top_edp, Z GHz)
>   - top_dp is switched to TVDPLL1
>   - TVDPLL1 changes its rate, top_edp outputs the wrong rate.
>   - eDP display is garbled
> 
> To solve this issue, remove all TVDPLL1 parents from `top_dp` and
> all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
> clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
> able to use the right bit index for the new parents list.

Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>

-- 
Regards,
Alexandre

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 3/3] clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes

[Chen-Yu Tsai]

On Fri, Nov 3, 2023 at 6:25 PM AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com> wrote:
>
> The top_dp and top_edp muxes can be both parented to either TVDPLL1
> or TVDPLL2, two identically specced PLLs for the specific purpose of
> giving out pixel clock: this becomes a problem when the MediaTek
> DisplayPort Interface (DPI) driver tries to set the pixel clock rate.
>
> In the usecase of two simultaneous outputs (using two controllers),
> it was seen that one of the displays would sometimes display garbled
> output (if any at all) and this was because:
>  - top_edp was set to TVDPLL1, outputting X GHz
>  - top_dp was set to TVDPLL2, outputting Y GHz
>    - mtk_dpi calls clk_set_rate(top_edp, Z GHz)
>  - top_dp is switched to TVDPLL1
>  - TVDPLL1 changes its rate, top_edp outputs the wrong rate.
>  - eDP display is garbled
>
> To solve this issue, remove all TVDPLL1 parents from `top_dp` and
> all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
> clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
> able to use the right bit index for the new parents list.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 1/3] clk: mediatek: clk-mux: Support custom parent indices for muxes

[Fei Shao]

On Fri, Nov 3, 2023 at 6:25 PM AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com> wrote:
>
> Add support for customized parent indices for MediaTek muxes: this is
> necessary for the case in which we want to exclude some clocks from
> a mux's parent clocks list, where the exclusions are not from the
> very bottom of the list but either in the middle or the beginning.
>
> Example:
> - MUX1 (all parents)
>   - parent1; idx=0
>   - parent2; idx=1
>   - parent3; idx=2
>
> - MUX1 (wanted parents)
>   - parent1; idx=0
>   - parent3; idx=2
>
> To achieve that add a `parent_index` array pointer to struct mtk_mux,
> then in .set_parent(), .get_parent() callbacks check if this array
> was populated and eventually get the index from that.
>
> Also, to avoid updating all clock drivers for all SoCs, rename the
> "main" macro to __GATE_CLR_SET_UPD_FLAGS (so, `__` was added) and
> add the new member to it; furthermore, GATE_CLK_SET_UPD_FLAGS has
> been reintroduced as being fully compatible with the older version.
>
> The new parent_index can be specified with the new `_INDEXED`
> variants of the MUX_GATE_CLR_SET_UPD_xxxx macros.
>
> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Tested on MT8188 with a Type-C -> DP adapter to an extended display
Gigabyte M32U.
The DP output reacts smoothly to resolution switch and refresh rate
change, and the internal eDP output also never freezes.

Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 2/3] clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes

[Fei Shao]

On Fri, Nov 3, 2023 at 6:25 PM AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com> wrote:
>
> The top_dp and top_edp muxes can be both parented to either TVDPLL1
> or TVDPLL2, two identically specced PLLs for the specific purpose of
> giving out pixel clock: this becomes a problem when the MediaTek
> DisplayPort Interface (DPI) driver tries to set the pixel clock rate.
>
> In the usecase of two simultaneous outputs (using two controllers),
> it was seen that one of the displays would sometimes display garbled
> output (if any at all) and this was because:
>  - top_edp was set to TVDPLL1, outputting X GHz
>  - top_dp was set to TVDPLL2, outputting Y GHz
>    - mtk_dpi calls clk_set_rate(top_edp, Z GHz)
>      - top_dp is switched to TVDPLL1
>      - TVDPLL1 changes its rate, top_edp outputs the wrong rate.
>      - eDP display is garbled
>
> To solve this issue, remove all TVDPLL1 parents from `top_dp` and
> all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
> clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
> able to use the right bit index for the new parents list.
>
> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Reviewed-by: Fei Shao <fshao@chromium.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 3/3] clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes

[Fei Shao]

On Fri, Nov 3, 2023 at 6:25 PM AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com> wrote:
>
> The top_dp and top_edp muxes can be both parented to either TVDPLL1
> or TVDPLL2, two identically specced PLLs for the specific purpose of
> giving out pixel clock: this becomes a problem when the MediaTek
> DisplayPort Interface (DPI) driver tries to set the pixel clock rate.
>
> In the usecase of two simultaneous outputs (using two controllers),
> it was seen that one of the displays would sometimes display garbled
> output (if any at all) and this was because:
>  - top_edp was set to TVDPLL1, outputting X GHz
>  - top_dp was set to TVDPLL2, outputting Y GHz
>    - mtk_dpi calls clk_set_rate(top_edp, Z GHz)
>  - top_dp is switched to TVDPLL1
>  - TVDPLL1 changes its rate, top_edp outputs the wrong rate.
>  - eDP display is garbled
>
> To solve this issue, remove all TVDPLL1 parents from `top_dp` and
> all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
> clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
> able to use the right bit index for the new parents list.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Tested on MT8188 with a Type-C -> DP adapter to an extended display
Gigabyte M32U.
The DP output reacts smoothly to resolution switch and refresh rate
change, and the internal eDP output also never freezes.

Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 0/3] MediaTek clocks: Support mux indices list and 8195 DP

[AngeloGioacchino Del Regno]

Il 03/11/23 11:25, AngeloGioacchino Del Regno ha scritto:
> Changes in v3:
>   - Rebased on next-20231025
>   - Added comment in the code explaining why the dp/edp parents lists
>     are split in one PLL per interface
>   - Added a commit performing the same reparenting on MT8188 as well
> 
> Changes in v2:
>   - Rebased on next-20231018
> 

Hello Stephen,

friendly ping for this fully reviewed/tested series :-)

Cheers,
Angelo

> This series adds support to specify custom parent indices for MediaTek
> MUX clocks, necessary to avoid setting the same parent PLL for MT8195's
> top_dp and top_edp clocks, solving DP+eDP concurrent output issues.
> 
> No fixes tags are provided as the clk-mux commit introduces new logic
> and the actual MT8195 fix depends on that.
> 
> This commit was tested on the Acer Tomato Chromebook (MT8195) with
> dual concurrent display outputs (internal eDP panel and TypeC->DP->HDMI
> adapter connected to Samsung UE40JU6400 4k TV); resolution switch on
> DP was also tested; eDP output is not paused and internal display keeps
> working as expected.
> 
> 
> After feedback on v1 of this series (effectively the same as v2, except
> for the rebase), I looked for an alternative solution with using
> clk_set_rate_exclusive() as proposed. Couldn't find any, as that still
> doesn't give any guarantee about selecting the same PLL that the driver
> was manipulating before setting the right divider MUX, hence that still
> wouldn't work correctly.
> 
> For more context, please look at the conversation at [1].
> 
> Cheers!
> 
> [1] https://lore.kernel.org/linux-arm-kernel/20230713072138.84117-1-angelogioacchino.delregno@collabora.com
> 
> AngeloGioacchino Del Regno (3):
>    clk: mediatek: clk-mux: Support custom parent indices for muxes
>    clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
>    clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
> 
>   drivers/clk/mediatek/clk-mt8188-topckgen.c | 27 +++++++-------
>   drivers/clk/mediatek/clk-mt8195-topckgen.c | 27 ++++++++++----
>   drivers/clk/mediatek/clk-mux.c             | 14 +++++++
>   drivers/clk/mediatek/clk-mux.h             | 43 ++++++++++++++++++++--
>   4 files changed, 86 insertions(+), 25 deletions(-)
> 




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 1/3] clk: mediatek: clk-mux: Support custom parent indices for muxes

[Stephen Boyd]

Quoting AngeloGioacchino Del Regno (2023-11-03 03:25:31)
> Add support for customized parent indices for MediaTek muxes: this is
> necessary for the case in which we want to exclude some clocks from
> a mux's parent clocks list, where the exclusions are not from the
> very bottom of the list but either in the middle or the beginning.
> 
> Example:
> - MUX1 (all parents)
>   - parent1; idx=0
>   - parent2; idx=1
>   - parent3; idx=2
> 
> - MUX1 (wanted parents)
>   - parent1; idx=0
>   - parent3; idx=2
> 
> To achieve that add a `parent_index` array pointer to struct mtk_mux,
> then in .set_parent(), .get_parent() callbacks check if this array
> was populated and eventually get the index from that.
> 
> Also, to avoid updating all clock drivers for all SoCs, rename the
> "main" macro to __GATE_CLR_SET_UPD_FLAGS (so, `__` was added) and
> add the new member to it; furthermore, GATE_CLK_SET_UPD_FLAGS has
> been reintroduced as being fully compatible with the older version.
> 
> The new parent_index can be specified with the new `_INDEXED`
> variants of the MUX_GATE_CLR_SET_UPD_xxxx macros.
> 
> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---

Applied to clk-next

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 2/3] clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes

[Stephen Boyd]

Quoting AngeloGioacchino Del Regno (2023-11-03 03:25:32)
> The top_dp and top_edp muxes can be both parented to either TVDPLL1
> or TVDPLL2, two identically specced PLLs for the specific purpose of
> giving out pixel clock: this becomes a problem when the MediaTek
> DisplayPort Interface (DPI) driver tries to set the pixel clock rate.
> 
> In the usecase of two simultaneous outputs (using two controllers),
> it was seen that one of the displays would sometimes display garbled
> output (if any at all) and this was because:
>  - top_edp was set to TVDPLL1, outputting X GHz
>  - top_dp was set to TVDPLL2, outputting Y GHz
>    - mtk_dpi calls clk_set_rate(top_edp, Z GHz)
>      - top_dp is switched to TVDPLL1
>      - TVDPLL1 changes its rate, top_edp outputs the wrong rate.
>      - eDP display is garbled
> 
> To solve this issue, remove all TVDPLL1 parents from `top_dp` and
> all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
> clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
> able to use the right bit index for the new parents list.
> 
> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---

Applied to clk-next

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 3/3] clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes

[Stephen Boyd]

Quoting AngeloGioacchino Del Regno (2023-11-03 03:25:33)
> The top_dp and top_edp muxes can be both parented to either TVDPLL1
> or TVDPLL2, two identically specced PLLs for the specific purpose of
> giving out pixel clock: this becomes a problem when the MediaTek
> DisplayPort Interface (DPI) driver tries to set the pixel clock rate.
> 
> In the usecase of two simultaneous outputs (using two controllers),
> it was seen that one of the displays would sometimes display garbled
> output (if any at all) and this was because:
>  - top_edp was set to TVDPLL1, outputting X GHz
>  - top_dp was set to TVDPLL2, outputting Y GHz
>    - mtk_dpi calls clk_set_rate(top_edp, Z GHz)
>  - top_dp is switched to TVDPLL1
>  - TVDPLL1 changes its rate, top_edp outputs the wrong rate.
>  - eDP display is garbled
> 
> To solve this issue, remove all TVDPLL1 parents from `top_dp` and
> all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
> clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
> able to use the right bit index for the new parents list.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---

Applied to clk-next

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel