Re: [PATCH v4 7/9] arm64: dts: qcom: shikra-cqm-evk: Enable A704 GPU

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 7/3/26 10:34 PM, Akhil P Oommen wrote:
> From: Aditya Sherawat <asherawa@qti.qualcomm.com>
> 
> Enable the A704 GPU and configure its zap-shader firmware on the
> Shikra CQM EVK board.
> 
> Signed-off-by: Aditya Sherawat <asherawa@qti.qualcomm.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
> index 269e11bd44f6..8206dddcfc75 100644
> --- a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
> +++ b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
> @@ -50,6 +50,14 @@ &remoteproc_mpss {
>  	status = "okay";
>  };
>  
> +&gpu {
> +	status = "okay";
> +};
> +
> +&gpu_zap_shader {
> +	firmware-name = "qcom/shikra/a704_zap.mbn";
> +};

Move this to evk.dtsi

Konrad