From: santosh.shilimkar@ti.com (Santosh Shilimkar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep code
Date: Fri, 17 Dec 2010 16:06:49 +0530 [thread overview]
Message-ID: <f5fb4ed5dd869c6f820e9f05f6e35877@mail.gmail.com> (raw)
In-Reply-To: <1292580506-4421-4-git-send-email-j-pihet@ti.com>
> -----Original Message-----
> From: linux-omap-owner at vger.kernel.org [mailto:linux-omap-
> owner at vger.kernel.org] On Behalf Of jean.pihet at newoldbits.com
> Sent: Friday, December 17, 2010 3:38 PM
> To: linux-omap at vger.kernel.org
> Cc: khilman at deeprootsystems.com; linux-arm-kernel at lists.infradead.org;
> Jean Pihet; Vishwanath BS
> Subject: [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep
> code
>
> From: Jean Pihet <j-pihet@ti.com>
>
> Using macros from existing include files for registers addresses.
>
> Tested on N900 and Beagleboard with full RET and OFF modes,
> using cpuidle and suspend.
>
> Based on original patch from Vishwa.
>
> Signed-off-by: Jean Pihet <j-pihet@ti.com>
> Cc: Vishwanath BS <vishwanath.bs@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> ---
> arch/arm/mach-omap2/control.h | 2 ++
> arch/arm/mach-omap2/sleep34xx.S | 29 ++++++++++++++++++-----------
> 2 files changed, 20 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/control.h
b/arch/arm/mach-omap2/control.h
> index d7911c5..72efefb 100644
> --- a/arch/arm/mach-omap2/control.h
> +++ b/arch/arm/mach-omap2/control.h
> @@ -274,6 +274,8 @@
> #define OMAP343X_SCRATCHPAD_ROM (OMAP343X_CTRL_BASE +
0x860)
> #define OMAP343X_SCRATCHPAD (OMAP343X_CTRL_BASE + 0x910)
> #define OMAP343X_SCRATCHPAD_ROM_OFFSET 0x19C
> +#define OMAP343X_SCRATCHPAD_REGADDR(reg) OMAP2_L4_IO_ADDRESS(\
> + OMAP343X_SCRATCHPAD + reg)
>
> /* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
> #define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0
> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-
> omap2/sleep34xx.S
> index 406cd2a..8e9f38f 100644
> --- a/arch/arm/mach-omap2/sleep34xx.S
> +++ b/arch/arm/mach-omap2/sleep34xx.S
> @@ -34,20 +34,27 @@
> #include "sdrc.h"
> #include "control.h"
>
> -#define SDRC_SCRATCHPAD_SEM_V 0xfa00291c
> -
> -#define PM_PREPWSTST_CORE_P 0x48306AE8
> +/*
> + * Registers access definitions
> + */
> +#define SDRC_SCRATCHPAD_SEM_OFFS 0xc
> +#define SDRC_SCRATCHPAD_SEM_V OMAP343X_SCRATCHPAD_REGADDR\
> + (SDRC_SCRATCHPAD_SEM_OFFS)
> +#define PM_PREPWSTST_CORE_P OMAP3430_PRM_BASE + CORE_MOD +\
> + OMAP3430_PM_PREPWSTST
> #define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD +
> OMAP2_PM_PWSTCTRL
> #define CM_IDLEST1_CORE_V OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
> #define CM_IDLEST_CKGEN_V OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST)
> -#define SRAM_BASE_P 0x40200000
> -#define CONTROL_STAT 0x480022F0
> -#define CONTROL_MEM_RTA_CTRL (OMAP343X_CTRL_BASE\
> - + OMAP36XX_CONTROL_MEM_RTA_CTRL)
> -#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is
> - * available */
> -#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE +
> OMAP343X_CONTROL_MEM_WKUP\
> - + SCRATCHPAD_MEM_OFFS)
> +#define SRAM_BASE_P OMAP3_SRAM_PA
> +#define CONTROL_STAT OMAP343X_CTRL_BASE +
OMAP343X_CONTROL_STATUS
> +#define CONTROL_MEM_RTA_CTRL (OMAP343X_CTRL_BASE +\
> + OMAP36XX_CONTROL_MEM_RTA_CTRL)
> +
> +/* Move this as correct place is available */
> +#define SCRATCHPAD_MEM_OFFS 0x310
> +#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE +\
> + OMAP343X_CONTROL_MEM_WKUP +\
> + SCRATCHPAD_MEM_OFFS)
> #define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER)
> #define SDRC_SYSCONFIG_P (OMAP343X_SDRC_BASE + SDRC_SYSCONFIG)
> #define SDRC_MR_0_P (OMAP343X_SDRC_BASE + SDRC_MR_0)
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-12-17 10:36 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-17 10:08 [PATCH 0/7 v5] OMAP3: clean up ASM sleep code jean.pihet at newoldbits.com
2010-12-17 10:08 ` [PATCH 1/7] OMAP3: remove unused code from the " jean.pihet at newoldbits.com
2010-12-17 10:36 ` Santosh Shilimkar
2010-12-17 13:18 ` Nishanth Menon
2010-12-17 10:08 ` [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses jean.pihet at newoldbits.com
2010-12-17 10:36 ` Santosh Shilimkar
2010-12-17 13:34 ` Nishanth Menon
2010-12-17 14:59 ` Jean Pihet
2010-12-17 15:00 ` Nishanth Menon
2010-12-17 10:08 ` [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep code jean.pihet at newoldbits.com
2010-12-17 10:36 ` Santosh Shilimkar [this message]
2010-12-17 13:51 ` Nishanth Menon
2010-12-17 10:08 ` [PATCH 4/7] OMAP3: re-organize " jean.pihet at newoldbits.com
2010-12-17 10:37 ` Santosh Shilimkar
2010-12-17 14:05 ` Nishanth Menon
2010-12-17 10:08 ` [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths jean.pihet at newoldbits.com
2010-12-17 10:37 ` Santosh Shilimkar
2010-12-17 15:35 ` Nishanth Menon
2010-12-18 15:54 ` Jean Pihet
2010-12-17 10:08 ` [PATCH 6/7] OMAP3: add comments for low power code errata jean.pihet at newoldbits.com
2010-12-17 10:37 ` Santosh Shilimkar
2010-12-17 15:43 ` Nishanth Menon
2010-12-17 10:08 ` [PATCH 7/7] OMAP3: ASM sleep code format rework jean.pihet at newoldbits.com
2010-12-17 10:37 ` Santosh Shilimkar
2010-12-17 15:58 ` Nishanth Menon
2010-12-18 15:56 ` Jean Pihet
2010-12-17 23:02 ` [PATCH 0/7 v5] OMAP3: clean up ASM sleep code Kevin Hilman
2010-12-17 23:07 ` Jean Pihet
2010-12-17 23:22 ` Nishanth Menon
2010-12-18 15:51 ` Jean Pihet
-- strict thread matches above, loose matches on Subject: below --
2010-12-18 15:44 [PATCH 0/7 v6] " jean.pihet at newoldbits.com
2010-12-18 15:44 ` [PATCH 3/7] OMAP3: remove hardcoded values from the " jean.pihet at newoldbits.com
2010-12-20 11:20 ` Vishwanath Sripathy
2010-12-16 17:50 [PATCH 0/7 v4] OMAP3: clean up " jean.pihet at newoldbits.com
2010-12-16 17:50 ` [PATCH 3/7] OMAP3: remove hardcoded values from the " jean.pihet at newoldbits.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f5fb4ed5dd869c6f820e9f05f6e35877@mail.gmail.com \
--to=santosh.shilimkar@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).