Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Devarsh Thakkar <devarsht@ti.com>
To: Jai Luthra <j-luthra@ti.com>, Nishanth Menon <nm@ti.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Jayesh Choudhary <j-choudhary@ti.com>
Subject: Re: [PATCH 1/5] arm64: dts: ti: k3-am62a-main: Add nodes for McASP
Date: Wed, 2 Aug 2023 13:08:44 +0530	[thread overview]
Message-ID: <f69b95ce-f285-1f2b-aca9-29bfbb6231af@ti.com> (raw)
In-Reply-To: <20230731-mcasp_am62a-v1-1-8bd137ffa8f1@ti.com>



On 31/07/23 18:14, Jai Luthra wrote:
> Same as AM62, AM62A has three instances of McASP which can be used for
> transmitting or receiving digital audio in various formats.
> 
> Signed-off-by: Jai Luthra <j-luthra@ti.com>
> Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>

Reviewed-by: Devarsh Thakkar <devarsht@ti.com>

> ---
>  arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 60 +++++++++++++++++++++++++++++++
>  1 file changed, 60 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> index 8397cb80f559..e4ced2cc790b 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> @@ -816,4 +816,64 @@ ecap2: pwm@23120000 {
>  		clock-names = "fck";
>  		status = "disabled";
>  	};
> +
> +	mcasp0: audio-controller@2b00000 {
> +		compatible = "ti,am33xx-mcasp-audio";
> +		reg = <0x00 0x02b00000 0x00 0x2000>,
> +		      <0x00 0x02b08000 0x00 0x400>;
> +		reg-names = "mpu", "dat";
> +		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "tx", "rx";
> +
> +		dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
> +		dma-names = "tx", "rx";
> +
> +		clocks = <&k3_clks 190 0>;
> +		clock-names = "fck";
> +		assigned-clocks = <&k3_clks 190 0>;
> +		assigned-clock-parents = <&k3_clks 190 2>;
> +		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
> +		status = "disabled";
> +	};
> +
> +	mcasp1: audio-controller@2b10000 {
> +		compatible = "ti,am33xx-mcasp-audio";
> +		reg = <0x00 0x02b10000 0x00 0x2000>,
> +		      <0x00 0x02b18000 0x00 0x400>;
> +		reg-names = "mpu", "dat";
> +		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "tx", "rx";
> +
> +		dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
> +		dma-names = "tx", "rx";
> +
> +		clocks = <&k3_clks 191 0>;
> +		clock-names = "fck";
> +		assigned-clocks = <&k3_clks 191 0>;
> +		assigned-clock-parents = <&k3_clks 191 2>;
> +		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
> +		status = "disabled";
> +	};
> +
> +	mcasp2: audio-controller@2b20000 {
> +		compatible = "ti,am33xx-mcasp-audio";
> +		reg = <0x00 0x02b20000 0x00 0x2000>,
> +		      <0x00 0x02b28000 0x00 0x400>;
> +		reg-names = "mpu", "dat";
> +		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "tx", "rx";
> +
> +		dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
> +		dma-names = "tx", "rx";
> +
> +		clocks = <&k3_clks 192 0>;
> +		clock-names = "fck";
> +		assigned-clocks = <&k3_clks 192 0>;
> +		assigned-clock-parents = <&k3_clks 192 2>;
> +		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
> +		status = "disabled";
> +	};
>  };

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2023-08-02  7:39 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-31 12:44 [PATCH 0/5] arm64: ti: Enable audio on AM62A Jai Luthra
2023-07-31 12:44 ` [PATCH 1/5] arm64: dts: ti: k3-am62a-main: Add nodes for McASP Jai Luthra
2023-08-02  7:38   ` Devarsh Thakkar [this message]
2023-07-31 12:44 ` [PATCH 2/5] arm64: dts: ti: k3-am62a7-sk: Split vcc_3v3 regulators Jai Luthra
2023-07-31 12:44 ` [PATCH 3/5] arm64: dts: ti: k3-am62a7-sk: Drop i2c-1 to 100Khz Jai Luthra
2023-08-02  7:39   ` Devarsh Thakkar
2023-07-31 12:44 ` [PATCH 4/5] arm64: dts: ti: k3-am62a7-sk: Enable audio on AM62A Jai Luthra
2023-08-02 10:45   ` Devarsh Thakkar
2023-08-02 11:40     ` Jai Luthra
2023-08-02 13:35       ` Nishanth Menon
2023-08-02 14:39         ` Devarsh Thakkar
2023-08-03  5:42         ` Jai Luthra
2023-07-31 12:44 ` [PATCH 5/5] arm64: defconfig: Enable TPS6593 PMIC for SK-AM62A Jai Luthra
2023-08-02 10:46   ` Devarsh Thakkar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f69b95ce-f285-1f2b-aca9-29bfbb6231af@ti.com \
    --to=devarsht@ti.com \
    --cc=catalin.marinas@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=j-choudhary@ti.com \
    --cc=j-luthra@ti.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox