Hi Navid, Agustin, My next goal is to clean up my zx297520v3 pin control driver and write a proper binding. Before I do that I would like to understand how pinctrl works on your board to decide how much code reuse makes sense. My main question is if the zx27 board can control individual pins or if multiple pins need to be controlled together. On zx297520v3 I can set every pin individually. Does the same apply to your boards? The background: There are two ways to write pinctrl bindings and drivers: Either exposing a simple pinmux= setting, that sets pin 123 to a specified function. The other way is to collect groups of pins and possible functions they can be assigned to in the driver. They are controlled via strings. I prefer to go via the former one, but as far as I understand it, this is not possible if hardware links two or more pins together. Can you advise me on what you know about your board's pin control? Cheers, Stefan