From: Suzuki K Poulose <suzuki.poulose@arm.com>
To: "Aneesh Kumar K.V (Arm)" <aneesh.kumar@kernel.org>,
linux-coco@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>,
Greg KH <gregkh@linuxfoundation.org>,
Jeremy Linton <jeremy.linton@arm.com>,
Jonathan Cameron <jic23@kernel.org>,
Lorenzo Pieralisi <lpieralisi@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Sudeep Holla <sudeep.holla@arm.com>,
Will Deacon <will@kernel.org>,
Steven Price <steven.price@arm.com>
Subject: Re: [PATCH v6 3/4] firmware: smccc: arm-cca-guest: Bind the TSM provider to an SMCCC device
Date: Thu, 4 Jun 2026 10:18:07 +0100 [thread overview]
Message-ID: <fa2c189a-33f6-4e54-bcfb-2c56768e45db@arm.com> (raw)
In-Reply-To: <20260527100233.428018-4-aneesh.kumar@kernel.org>
On 27/05/2026 11:02, Aneesh Kumar K.V (Arm) wrote:
> The Arm CCA guest TSM provider currently binds through the arm-cca-dev
> platform device. Like arm-smccc-trng, this device is not an independent
> platform resource; it is a software representation of the RSI firmware
> service discovered through SMCCC.
>
> Move RSI discovery into the SMCCC firmware driver. When the SMCCC conduit
> is SMC and the RSI ABI version check succeeds, create an arm-rsi-dev SMCCC
> device. Convert the Arm CCA guest TSM provider to an SMCCC driver so it
> binds to that discovered RSI service and keeps module autoloading through
> the SMCCC device id table.
>
> Keep the old arm-cca-dev platform-device registration for now. Userspace
> has used that device as a Realm-guest indicator, so removing it is left to
> a follow-up patch that adds a replacement sysfs ABI.
>
> Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
> ---
> arch/arm64/include/asm/rsi.h | 2 +-
> arch/arm64/kernel/rsi.c | 2 +-
> drivers/firmware/smccc/Makefile | 4 ++
> drivers/firmware/smccc/rmm.c | 25 ++++++++
> drivers/firmware/smccc/rmm.h | 17 ++++++
> drivers/firmware/smccc/smccc.c | 8 +++
> drivers/virt/coco/arm-cca-guest/Kconfig | 1 +
> drivers/virt/coco/arm-cca-guest/Makefile | 2 +
> .../{arm-cca-guest.c => arm-cca.c} | 60 +++++++++----------
> 9 files changed, 89 insertions(+), 32 deletions(-)
> create mode 100644 drivers/firmware/smccc/rmm.c
> create mode 100644 drivers/firmware/smccc/rmm.h
> rename drivers/virt/coco/arm-cca-guest/{arm-cca-guest.c => arm-cca.c} (85%)
>
> diff --git a/arch/arm64/include/asm/rsi.h b/arch/arm64/include/asm/rsi.h
> index 88b50d660e85..2d2d363aaaee 100644
> --- a/arch/arm64/include/asm/rsi.h
> +++ b/arch/arm64/include/asm/rsi.h
> @@ -10,7 +10,7 @@
> #include <linux/jump_label.h>
> #include <asm/rsi_cmds.h>
>
> -#define RSI_PDEV_NAME "arm-cca-dev"
> +#define RSI_DEV_NAME "arm-rsi-dev"
>
> DECLARE_STATIC_KEY_FALSE(rsi_present);
>
> diff --git a/arch/arm64/kernel/rsi.c b/arch/arm64/kernel/rsi.c
> index 92160f2e57ff..da440f71bb64 100644
> --- a/arch/arm64/kernel/rsi.c
> +++ b/arch/arm64/kernel/rsi.c
> @@ -161,7 +161,7 @@ void __init arm64_rsi_init(void)
> }
>
> static struct platform_device rsi_dev = {
> - .name = RSI_PDEV_NAME,
> + .name = "arm-cca-dev",
> .id = PLATFORM_DEVID_NONE
> };
>
> diff --git a/drivers/firmware/smccc/Makefile b/drivers/firmware/smccc/Makefile
> index 40d19144a860..33c850aaff4d 100644
> --- a/drivers/firmware/smccc/Makefile
> +++ b/drivers/firmware/smccc/Makefile
> @@ -2,3 +2,7 @@
> #
> obj-$(CONFIG_HAVE_ARM_SMCCC_DISCOVERY) += smccc.o kvm_guest.o
> obj-$(CONFIG_ARM_SMCCC_SOC_ID) += soc_id.o
> +
> +ifeq ($(CONFIG_HAVE_ARM_SMCCC_DISCOVERY),y)
> +obj-$(CONFIG_ARM64) += rmm.o
> +endif
> diff --git a/drivers/firmware/smccc/rmm.c b/drivers/firmware/smccc/rmm.c
> new file mode 100644
> index 000000000000..d572f47e955c
> --- /dev/null
> +++ b/drivers/firmware/smccc/rmm.c
> @@ -0,0 +1,25 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2026 Arm Limited
> + */
> +
> +#include <linux/arm-smccc-bus.h>
> +#include <linux/err.h>
> +#include <linux/printk.h>
> +
> +#include "rmm.h"
> +
> +void __init register_rsi_device(void)
minor nit: Could we rename this global symbol to scope it under rmm ?
perhaps, rmm_register_rsi_device()?
> +{
> + unsigned long ret;
> +
> + if (arm_smccc_1_1_get_conduit() != SMCCC_CONDUIT_SMC)
> + return;
> +
> + ret = rsi_request_version(RSI_ABI_VERSION, NULL, NULL);
> + if (ret != RSI_SUCCESS)
> + return;
> +
> + if (IS_ERR(arm_smccc_device_register(RSI_DEV_NAME)))
> + pr_err("%s: could not register device\n", RSI_DEV_NAME);
> +}
> diff --git a/drivers/firmware/smccc/rmm.h b/drivers/firmware/smccc/rmm.h
> new file mode 100644
> index 000000000000..627098e2ae1f
> --- /dev/null
> +++ b/drivers/firmware/smccc/rmm.h
> @@ -0,0 +1,17 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _SMCCC_RMM_H
> +#define _SMCCC_RMM_H
> +
> +#include <linux/init.h>
> +
> +#ifdef CONFIG_ARM64
> +#include <linux/arm-smccc-bus.h>
> +#include <asm/rsi_cmds.h>
minor nit: Could the header files be moved to rmm.c ?
> +void __init register_rsi_device(void);
> +#else
> +
> +static inline void __init register_rsi_device(void)
> +{
> +}
> +#endif
> +#endif
> diff --git a/drivers/firmware/smccc/smccc.c b/drivers/firmware/smccc/smccc.c
> index 6d260354d0f9..888e7f1d6f86 100644
> --- a/drivers/firmware/smccc/smccc.c
> +++ b/drivers/firmware/smccc/smccc.c
> @@ -15,6 +15,8 @@
>
> #include <asm/archrandom.h>
>
> +#include "rmm.h"
> +
> static u32 smccc_version = ARM_SMCCC_VERSION_1_0;
> static enum arm_smccc_conduit smccc_conduit = SMCCC_CONDUIT_NONE;
> static DEFINE_IDA(arm_smccc_bus_id);
> @@ -240,6 +242,12 @@ subsys_initcall(arm_smccc_bus_init);
>
> static int __init smccc_devices_init(void)
> {
> + /*
> + * Register the RMI and RSI devices only when firmware exposes
> + * the required SMCCC function IDs at a supported revision.
> + */
> + register_rsi_device();
nit: We don't have RMI devices yet ? Do we want to make it
rmm_register_devices();
instead ?
> +
> if (smccc_trng_available) {
> struct arm_smccc_device *sdev;
>
> diff --git a/drivers/virt/coco/arm-cca-guest/Kconfig b/drivers/virt/coco/arm-cca-guest/Kconfig
> index 3f0f013f03f1..ad7538750c5a 100644
> --- a/drivers/virt/coco/arm-cca-guest/Kconfig
> +++ b/drivers/virt/coco/arm-cca-guest/Kconfig
> @@ -1,6 +1,7 @@
> config ARM_CCA_GUEST
> tristate "Arm CCA Guest driver"
> depends on ARM64
> + depends on HAVE_ARM_SMCCC_DISCOVERY
> select TSM_REPORTS
> help
> The driver provides userspace interface to request and
> diff --git a/drivers/virt/coco/arm-cca-guest/Makefile b/drivers/virt/coco/arm-cca-guest/Makefile
> index 69eeba08e98a..75a120e24fda 100644
> --- a/drivers/virt/coco/arm-cca-guest/Makefile
> +++ b/drivers/virt/coco/arm-cca-guest/Makefile
> @@ -1,2 +1,4 @@
> # SPDX-License-Identifier: GPL-2.0-only
> obj-$(CONFIG_ARM_CCA_GUEST) += arm-cca-guest.o
> +
> +arm-cca-guest-y += arm-cca.o
> diff --git a/drivers/virt/coco/arm-cca-guest/arm-cca-guest.c b/drivers/virt/coco/arm-cca-guest/arm-cca.c
> similarity index 85%
> rename from drivers/virt/coco/arm-cca-guest/arm-cca-guest.c
> rename to drivers/virt/coco/arm-cca-guest/arm-cca.c
> index 66d00b6ceb78..8d5a09bd772a 100644
> --- a/drivers/virt/coco/arm-cca-guest/arm-cca-guest.c
> +++ b/drivers/virt/coco/arm-cca-guest/arm-cca.c
> @@ -4,6 +4,7 @@
> */
>
> #include <linux/arm-smccc.h>
> +#include <linux/arm-smccc-bus.h>
> #include <linux/cc_platform.h>
> #include <linux/kernel.h>
> #include <linux/mod_devicetable.h>
> @@ -182,52 +183,51 @@ static int arm_cca_report_new(struct tsm_report *report, void *data)
> return ret;
> }
>
> -static const struct tsm_report_ops arm_cca_tsm_ops = {
> +static const struct tsm_report_ops arm_cca_tsm_report_ops = {
> .name = KBUILD_MODNAME,
> .report_new = arm_cca_report_new,
> };
>
Would you like to either :
1) Call out renaming the existing cca_tsm to reflect cca_tsm_report
in the commit description ?
OR
2) Split the renaming of the "report" stuff in a follow up patch ?
Rest looks fine by me.
Suzuki
> -/**
> - * arm_cca_guest_init - Register with the Trusted Security Module (TSM)
> - * interface.
> - *
> - * Return:
> - * * %0 - Registered successfully with the TSM interface.
> - * * %-ENODEV - The execution context is not an Arm Realm.
> - * * %-EBUSY - Already registered.
> - */
> -static int __init arm_cca_guest_init(void)
> +static void unregister_cca_tsm_report(void *data)
> +{
> + tsm_report_unregister(&arm_cca_tsm_report_ops);
> +}
> +
> +static int cca_tsm_probe(struct arm_smccc_device *sdev)
> {
> int ret;
>
> if (!is_realm_world())
> return -ENODEV;
>
> - ret = tsm_report_register(&arm_cca_tsm_ops, NULL);
> - if (ret < 0)
> - pr_err("Error %d registering with TSM\n", ret);
> + ret = tsm_report_register(&arm_cca_tsm_report_ops, NULL);
> + if (ret < 0) {
> + dev_err_probe(&sdev->dev, ret, "Error registering with TSM\n");
> + return ret;
> + }
>
> - return ret;
> -}
> -module_init(arm_cca_guest_init);
> + ret = devm_add_action_or_reset(&sdev->dev, unregister_cca_tsm_report,
> + NULL);
> + if (ret < 0) {
> + dev_err_probe(&sdev->dev, ret, "Error registering devm action\n");
> + return ret;
> + }
>
> -/**
> - * arm_cca_guest_exit - unregister with the Trusted Security Module (TSM)
> - * interface.
> - */
> -static void __exit arm_cca_guest_exit(void)
> -{
> - tsm_report_unregister(&arm_cca_tsm_ops);
> + return 0;
> }
> -module_exit(arm_cca_guest_exit);
>
> -/* modalias, so userspace can autoload this module when RSI is available */
> -static const struct platform_device_id arm_cca_match[] __maybe_unused = {
> - { RSI_PDEV_NAME, 0},
> - { }
> +static const struct arm_smccc_device_id cca_tsm_id_table[] = {
> + { .name = RSI_DEV_NAME },
> + {}
> };
> +MODULE_DEVICE_TABLE(arm_smccc, cca_tsm_id_table);
>
> -MODULE_DEVICE_TABLE(platform, arm_cca_match);
> +static struct arm_smccc_driver cca_tsm_driver = {
> + .name = KBUILD_MODNAME,
> + .probe = cca_tsm_probe,
> + .id_table = cca_tsm_id_table,
> +};
> +module_arm_smccc_driver(cca_tsm_driver);
> MODULE_AUTHOR("Sami Mujawar <sami.mujawar@arm.com>");
> MODULE_DESCRIPTION("Arm CCA Guest TSM Driver");
> MODULE_LICENSE("GPL");
next prev parent reply other threads:[~2026-06-04 9:19 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-27 10:02 [PATCH v6 0/4] Switch Arm SMCCC firmware services to an SMCCC bus Aneesh Kumar K.V (Arm)
2026-05-27 10:02 ` [PATCH v6 1/4] firmware: smccc: Add an Arm " Aneesh Kumar K.V (Arm)
2026-06-03 18:52 ` Sudeep Holla
2026-05-27 10:02 ` [PATCH v6 2/4] firmware: hwrng: arm_smccc_trng: Register as an SMCCC device Aneesh Kumar K.V (Arm)
2026-05-27 10:02 ` [PATCH v6 3/4] firmware: smccc: arm-cca-guest: Bind the TSM provider to " Aneesh Kumar K.V (Arm)
2026-06-04 9:18 ` Suzuki K Poulose [this message]
2026-06-04 9:21 ` Sudeep Holla
2026-06-04 10:24 ` Suzuki K Poulose
2026-06-04 10:55 ` Sudeep Holla
2026-06-04 13:26 ` Aneesh Kumar K.V
2026-06-04 13:45 ` Sudeep Holla
2026-05-27 10:02 ` [PATCH v6 4/4] coco: guest: arm64: Replace dummy CCA device with sysfs ABI Aneesh Kumar K.V (Arm)
2026-06-04 12:58 ` [PATCH v6 0/4] Switch Arm SMCCC firmware services to an SMCCC bus Aneesh Kumar K.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fa2c189a-33f6-4e54-bcfb-2c56768e45db@arm.com \
--to=suzuki.poulose@arm.com \
--cc=aneesh.kumar@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=gregkh@linuxfoundation.org \
--cc=jeremy.linton@arm.com \
--cc=jic23@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-coco@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mark.rutland@arm.com \
--cc=steven.price@arm.com \
--cc=sudeep.holla@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox