[PATCH v2 05/13] ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi

[absahu@codeaurora.org (Abhishek Sahu)]

On 2018-03-16 15:08, Sricharan R wrote:
> Add the common parts for the dk04 boards.
> 
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>

  Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>

> ---
>  arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 129 
> ++++++++++++++++++++++++++
>  1 file changed, 129 insertions(+)
>  create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
> 
> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
> b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
> new file mode 100644
> index 0000000..96ce081
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
> @@ -0,0 +1,129 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018, The Linux Foundation. All rights reserved.
> +
> +#include "qcom-ipq4019.dtsi"
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
> +	compatible = "qcom,ipq4019";
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x80000000 0x10000000>; /* 256MB */
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		rsvd1 at 87000000 {
> +			/* Reserved for other subsystem */
> +			reg = <0x87000000 0x500000>;
> +			no-map;
> +		};
> +
> +		wifi_dump at 87500000 {
> +			reg = <0x87500000 0x600000>;
> +			no-map;
> +		};
> +
> +		rsvd2 at 87B00000 {
> +			/* Reserved for other subsystem */
> +			reg = <0x87B00000 0x500000>;
> +			no-map;
> +		};
> +	};
> +
> +	soc {
> +		pinctrl at 1000000 {
> +			serial_0_pins: serial0_pinmux {
> +				mux {
> +					pins = "gpio16", "gpio17";
> +					function = "blsp_uart0";
> +					bias-disable;
> +				};
> +			};
> +
> +			serial_1_pins: serial1_pinmux {
> +				mux {
> +					pins = "gpio8", "gpio9",
> +						"gpio10", "gpio11";
> +					function = "blsp_uart1";
> +					bias-disable;
> +				};
> +			};
> +
> +			spi_0_pins: spi_0_pinmux {
> +				pinmux {
> +					function = "blsp_spi0";
> +					pins = "gpio13", "gpio14", "gpio15";
> +					bias-disable;
> +				};
> +				pinmux_cs {
> +					function = "gpio";
> +					pins = "gpio12";
> +					bias-disable;
> +					output-high;
> +				};
> +			};
> +
> +			i2c_0_pins: i2c_0_pinmux {
> +				mux {
> +					pins = "gpio20", "gpio21";
> +					function = "blsp_i2c0";
> +					bias-disable;
> +				};
> +			};
> +
> +			nand_pins: nand_pins {
> +				mux {
> +					pins = "gpio53", "gpio55", "gpio56",
> +						"gpio57", "gpio58", "gpio59",
> +						"gpio60", "gpio62", "gpio63",
> +						"gpio64", "gpio65", "gpio66",
> +						"gpio67", "gpio68", "gpio69";
> +					function = "qpic";
> +				};
> +			};
> +		};
> +
> +		serial at 78af000 {
> +			pinctrl-0 = <&serial_0_pins>;
> +			pinctrl-names = "default";
> +			status = "ok";
> +		};
> +
> +		serial at 78b0000 {
> +			pinctrl-0 = <&serial_1_pins>;
> +			pinctrl-names = "default";
> +			status = "ok";
> +		};
> +
> +		blsp_dma: dma at 7884000 {
> +			status = "ok";
> +		};
> +
> +		spi_0: spi at 78b5000 { /* BLSP1 QUP1 */
> +			pinctrl-0 = <&spi_0_pins>;
> +			pinctrl-names = "default";
> +			status = "ok";
> +			cs-gpios = <&tlmm 12 0>;
> +
> +			m25p80 at 0 {
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				reg = <0>;
> +				compatible = "n25q128a11";
> +				spi-max-frequency = <24000000>;
> +			};
> +		};
> +
> +		pcie0: pci at 40000000 {
> +			status = "ok";
> +			perst-gpio = <&tlmm 38 0x1>;
> +		};
> +	};
> +};