Re: sun6i MIPI DSI driver EoTp

Maxime Ripard
2019-03-12T15:53:13Z

[-- Attachment #1.1: Type: text/plain, Size: 1000 bytes --]

Hi,

On Mon, Mar 11, 2019 at 09:43:36PM +0300, Sergey Suloev wrote:
> according to MIPI DSI spec chapter 8.8.2  the EoTp packet can be enabled or
> disabled on the protocol level.
> It seems like that it might be required for the panel I am working on (Himax
> HX8379A-based panel).
> Here is some crappy driver I found on github showing that it might be an
> issue  [1]
>
> May I ask you if this feature supported by sun6i MIPI DSI driver and
> where ?
> As there is no datasheet available, could you please help to support this
> feature (if not yet) ?

I haven't seen any panel that used it so far, so I have no idea.

I guess this would be controlled through
SUN6I_DSI_BASIC_CTL0_HS_EOTP_EN in the driver.

> The second point is that the panel requires NON-BURST-WITH-SYNC-EVENTS mode.
> Could it be a problem with the current driver?

That should be supported in -next

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]