[PATCH] Fix IXP4xx coherent allocations

[khc@pm.waw.pl (Krzysztof Halasa)]

ARM core code currently requires coherent DMA mask to be set. Make sure
we limit PCI devices to 64 MiB while allowing on-chip devices to access
the whole 4 GiB address space.

This fixes a v3.7+ regression which broke IXP4xx built-in network devices.

Signed-off-by: Krzysztof Ha?asa <khc@pm.waw.pl>
Cc: <stable@vger.kernel.org>

diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index ea1933d..8629fc9 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -454,10 +454,15 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
 
 int dma_set_coherent_mask(struct device *dev, u64 mask)
 {
-	if (mask >= SZ_64M - 1)
-		return 0;
+	if ((mask & DMA_BIT_MASK(26)) != DMA_BIT_MASK(26))
+		return -EIO;
+
+	/* PCI devices are limited to 64 MiB */
+	if (dev_is_pci(dev))
+		mask &= DMA_BIT_MASK(26); /* Use DMA region */
 
-	return -EIO;
+	dev->coherent_dma_mask = mask;
+	return 0;
 }
 
 EXPORT_SYMBOL(ixp4xx_pci_read);
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index 6958a5e..7c08269 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -1423,7 +1423,7 @@ static int eth_init_one(struct platform_device *pdev)
 	dev->netdev_ops = &ixp4xx_netdev_ops;
 	dev->ethtool_ops = &ixp4xx_ethtool_ops;
 	dev->tx_queue_len = 100;
-
+	dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
 	netif_napi_add(dev, &port->napi, eth_poll, NAPI_WEIGHT);
 
 	if (!(port->npe = npe_request(NPE_ID(port->id)))) {
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 95d0451..83b4597 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -1367,6 +1367,7 @@ static int hss_init_one(struct platform_device *pdev)
 	port->id = pdev->id;
 	port->dev = &pdev->dev;
 	port->plat = pdev->dev.platform_data;
+	dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
 	netif_napi_add(dev, &port->napi, hss_hdlc_poll, NAPI_WEIGHT);
 
 	if ((err = register_hdlc_device(dev)))