[PATCH 03/29] pxa3xx_nand: introduce default timing to reduce

[leiwen@marvell.com (Lei Wen)]

read id times

We certainly don't need to send read id command times by times, since
we already know what the id is after the first read id...

So create a default timing which could ensure it would successfully read
id out all supported chip. Then follow the build-in table to reconfigure
the timing.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 drivers/mtd/nand/pxa3xx_nand.c |   56 ++++++++++++++++++---------------------
 1 files changed, 26 insertions(+), 30 deletions(-)

diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 52cec28..b605147 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -190,15 +190,18 @@ static struct pxa3xx_nand_cmdset default_cmdset = {
 };

 static struct pxa3xx_nand_timing __devinitdata timing[] = {
-	{ 10,  0, 20, 40, 30, 40, 11123, 110, 10, },
-	{ 10, 25, 15, 25, 15, 30, 25000,  60, 10, },
-	{ 10, 35, 15, 25, 15, 25, 25000,  60, 10, },
+	{ 40, 80, 60, 100, 80, 100, 90000, 400, 40, },
+	{ 10,  0, 20,  40, 30,  40, 11123, 110, 10, },
+	{ 10, 25, 15,  25, 15,  30, 25000,  60, 10, },
+	{ 10, 35, 15,  25, 15,  25, 25000,  60, 10, },
 };

-#define NAND_SETTING_SAMSUNG     &default_cmdset, &timing[0]
-#define NAND_SETTING_MICRON      &default_cmdset, &timing[1]
-#define NAND_SETTING_ST          &default_cmdset, &timing[2]
+#define NAND_SETTING_DEFAULT     &default_cmdset, &timing[0]
+#define NAND_SETTING_SAMSUNG     &default_cmdset, &timing[1]
+#define NAND_SETTING_MICRON      &default_cmdset, &timing[2]
+#define NAND_SETTING_ST          &default_cmdset, &timing[3]
 static struct pxa3xx_nand_flash __devinitdata builtin_flash_types[] = {
+	{      0,   0, 2048,  8,  8,    0, NAND_SETTING_DEFAULT, },
 	{ 0x46ec,  32,  512, 16, 16, 4096, NAND_SETTING_SAMSUNG, },
 	{ 0xdaec,  64, 2048,  8,  8, 2048, NAND_SETTING_SAMSUNG, },
 	{ 0xd7ec, 128, 4096,  8,  8, 8192, NAND_SETTING_SAMSUNG, },
@@ -948,36 +951,29 @@ static int pxa3xx_nand_detect_flash(struct
pxa3xx_nand_info *info,
 		if (pxa3xx_nand_detect_config(info) == 0)
 			return 0;

-	for (i = 0; i<pdata->num_flash; ++i) {
-		f = pdata->flash + i;
-
-		if (pxa3xx_nand_config_flash(info, f))
-			continue;
-
-		if (__readid(info, &id))
-			continue;
-
-		if (id == f->chip_id)
-			return 0;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(builtin_flash_types); i++) {
-
-		f = &builtin_flash_types[i];
-
-		if (pxa3xx_nand_config_flash(info, f))
-			continue;
-
-		if (__readid(info, &id))
-			continue;
-
-		if (id == f->chip_id)
+	/* we use default timing to detect id */
+	f = &builtin_flash_types[0];
+	pxa3xx_nand_config_flash(info, f);
+	if (__readid(info, &id))
+		goto fail_detect;
+
+	for (i=0; i<ARRAY_SIZE(builtin_flash_types) + pdata->num_flash - 1; i++) {
+		/* we first choose the flash definition from platfrom */
+		if (i < pdata->num_flash)
+			f = pdata->flash + i;
+		else
+			f = &builtin_flash_types[i - pdata->num_flash + 1];
+		if (f->chip_id == id) {
+			dev_info(&info->pdev->dev, "detect chip id: 0x%x\n", id);
+			pxa3xx_nand_config_flash(info, f);
 			return 0;
+		}
 	}

 	dev_warn(&info->pdev->dev,
 		 "failed to detect configured nand flash; found %04x instead of\n",
 		 id);
+fail_detect:
 	return -ENODEV;
 }

-- 
1.7.0.4