linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: b32955@freescale.com (Huang Shijie)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] print_more_log
Date: Mon, 8 Aug 2011 18:39:11 +0800	[thread overview]
Message-ID: <mailman.55.1312871857.20020.linux-arm-kernel@lists.infradead.org> (raw)

print out the DMA register when timeout occur.

Signed-off-by: Huang Shijie <b32955@freescale.com>
---
 drivers/dma/mxs-dma.c                  |   37 +++++++++++++++++++++++++++++++-
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c |    2 +
 2 files changed, 38 insertions(+), 1 deletions(-)

diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
index 88aad4f..755cbfc 100644
--- a/drivers/dma/mxs-dma.c
+++ b/drivers/dma/mxs-dma.c
@@ -130,6 +130,7 @@ struct mxs_dma_engine {
 	struct mxs_dma_chan		mxs_chans[MXS_DMA_CHANNELS];
 };
 
+struct mxs_dma_chan *g_mxs_chan;
 static void mxs_dma_reset_chan(struct mxs_dma_chan *mxs_chan)
 {
 	struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
@@ -239,6 +240,7 @@ static dma_cookie_t mxs_dma_tx_submit(struct dma_async_tx_descriptor *tx)
 	struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(tx->chan);
 
 	mxs_dma_enable_chan(mxs_chan);
+	g_mxs_chan = mxs_chan;
 
 	return mxs_dma_assign_cookie(mxs_chan);
 }
@@ -370,6 +372,7 @@ static void mxs_dma_free_chan_resources(struct dma_chan *chan)
 	clk_disable(mxs_dma->clk);
 }
 
+static int idx;
 static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg(
 		struct dma_chan *chan, struct scatterlist *sgl,
 		unsigned int sg_len, enum dma_data_direction direction,
@@ -381,7 +384,6 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg(
 	struct scatterlist *sg;
 	int i, j;
 	u32 *pio;
-	static int idx;
 
 	if (mxs_chan->status == DMA_IN_PROGRESS && !append)
 		return NULL;
@@ -606,6 +608,39 @@ err_out:
 	return ret;
 }
 
+
+void dump_dma_reg(void)
+{
+	int i;
+	u32 stat1;
+
+	struct mxs_dma_chan *mxs_chan = g_mxs_chan;
+	struct mxs_dma_engine *g_mxs_dma = mxs_chan->mxs_dma;
+	struct mxs_dma_ccw *ccw;
+
+	printk("------------------------DMA DUMP END ------------\n");
+	for (i = 0; i < 7; i++) {
+		stat1 = readl(g_mxs_dma->base + 0x10 * i);
+		printk("APBH REG :%x : %.8X\n", 0x10 * i, stat1);
+	}
+	for (i = 0; i < 7; i++) {
+		stat1 = readl(g_mxs_dma->base + 0x10 * i + 0x400);
+		printk("APBH REG :%x : %.8X\n", 0x10 * i + 0x400, stat1);
+	}
+
+	for (i = 0; i < idx; i++) {
+		int j;
+
+		ccw = &mxs_chan->ccw[i];
+		printk("[ %d ] : ME : %.8x, next : %.8x, bits : %.8x, bytes : %.8x, buf : %.8x\n",
+			i, mxs_chan->ccw_phys + sizeof(*ccw) * i,
+			ccw->next, ccw->bits, ccw->xfer_bytes, ccw->bufaddr);
+		for (j = 0; j < 3; j++)
+			printk("[ %d ] PIO[%d] : %.8x\n", i, j, ccw->pio_words[j]); 
+	}
+	printk("------------------------DMA DUMP END ------------\n");
+}
+
 static int __init mxs_dma_probe(struct platform_device *pdev)
 {
 	const struct platform_device_id *id_entry =
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 1c2cbc5..3d6895b 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -378,6 +378,7 @@ int start_dma_without_bch_irq(struct gpmi_nand_data *this,
 {
 	struct completion *dma_c = &this->dma_done;
 	int err;
+	extern void dump_dma_reg(void);
 
 	init_completion(dma_c);
 
@@ -391,6 +392,7 @@ int start_dma_without_bch_irq(struct gpmi_nand_data *this,
 	if (err) {
 		pr_info("DMA timeout, last DMA :%d\n", this->last_dma_type);
 		if (gpmi_debug & GPMI_DEBUG_CRAZY) {
+			dump_dma_reg();
 			gpmi_show_regs(this);
 			panic("-----------DMA FAILED------------------");
 		}
-- 
1.7.0.4


--------------040304010008030902080407--

             reply	other threads:[~2011-08-08 10:39 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-08 10:39 Huang Shijie [this message]
  -- strict thread matches above, loose matches on Subject: below --
2011-08-08 10:39 [PATCH] print_more_log Huang Shijie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=mailman.55.1312871857.20020.linux-arm-kernel@lists.infradead.org \
    --to=b32955@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).