From: sundar.iyer@stericsson.com (Sundar R Iyer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/2] ux500: add ab8500-regulators machine specific data
Date: Sun, 6 Jun 2010 19:16:03 +0530 [thread overview]
Message-ID: <mailman.73.1279037640.27306.linux-arm-kernel@lists.infradead.org> (raw)
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>
Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com>
---
CHANGELOG
v2 -> v3
- Empty the regulator_consumer_supply since there is no actual
device to supply
v1 -> v2
- Removed NULL device reference
arch/arm/mach-ux500/Makefile | 1 +
arch/arm/mach-ux500/board-mop500-regulators.c | 179 +++++++++++++++++++++++++
2 files changed, 180 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-ux500/board-mop500-regulators.c
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 0753a69..311f996 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_AB8500_PRCMU_I2C) += ab8500-prcmu-i2c.o
+obj-$(CONFIG_REGULATOR_AB8500) += board-mop500-regulators.o
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
new file mode 100644
index 0000000..08bc966
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *
+ * MOP500 board specific initialization for regulators
+ */
+#include <linux/kernel.h>
+#include <linux/regulator/machine.h>
+
+static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
+};
+
+struct regulator_init_data ab8500_vaux1_regulator = {
+ .supply_regulator_dev = NULL,
+ .constraints = {
+ .name = "ab8500-vaux1",
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
+ .consumer_supplies = ab8500_vaux1_consumers,
+};
+
+static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
+};
+
+struct regulator_init_data ab8500_vaux2_regulator = {
+ .supply_regulator_dev = NULL,
+ .constraints = {
+ .name = "ab8500-vaux2",
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
+ .consumer_supplies = ab8500_vaux2_consumers,
+};
+
+static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
+};
+
+struct regulator_init_data ab8500_vaux3_regulator = {
+ .supply_regulator_dev = NULL,
+ .constraints = {
+ .name = "ab8500-vaux3",
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
+ .consumer_supplies = ab8500_vaux3_consumers,
+};
+
+/* supply for tvout, gpadc, TVOUT LDO */
+static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
+};
+
+struct regulator_init_data ab8500_vtvout_init = {
+ .supply_regulator_dev = NULL,
+ .constraints = {
+ .name = "ab8500-vtvout",
+ .min_uV = 1900000,
+ .max_uV = 2100000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
+ .consumer_supplies = ab8500_vtvout_consumers,
+};
+
+/* supply for ab8500-vaudio, VAUDIO LDO */
+static struct regulator_consumer_supply ab8500_vaudio_consumers[] = {
+};
+
+struct regulator_init_data ab8500_vaudio_init = {
+ .supply_regulator_dev = NULL,
+ .constraints = {
+ .name = "ab8500-vaudio",
+ .min_uV = 1925000,
+ .max_uV = 2075000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vaudio_consumers),
+ .consumer_supplies = ab8500_vaudio_consumers,
+};
+
+/* supply for v-anamic1 VAMic1-LDO */
+static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
+};
+
+struct regulator_init_data ab8500_vamic1_init = {
+ .supply_regulator_dev = NULL,
+ .constraints = {
+ .name = "ab8500-vamic1",
+ .min_uV = 2000000,
+ .max_uV = 2100000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
+ .consumer_supplies = ab8500_vamic1_consumers,
+};
+
+/* supply for v-amic2, VAMIC2 LDO*/
+static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
+};
+
+struct regulator_init_data ab8500_vamic2_init = {
+ .supply_regulator_dev = NULL,
+ .constraints = {
+ .name = "ab8500-vamic2",
+ .min_uV = 2000000,
+ .max_uV = 2100000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
+ .consumer_supplies = ab8500_vamic2_consumers,
+};
+
+/* supply for v-dmic, VDMIC LDO */
+static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
+};
+
+struct regulator_init_data ab8500_vdmic_init = {
+ .supply_regulator_dev = NULL,
+ .constraints = {
+ .name = "ab8500-vdmic",
+ .min_uV = 1700000,
+ .max_uV = 1950000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
+ .consumer_supplies = ab8500_vdmic_consumers,
+};
+
+/* supply for v-intcore12, VINTCORE12 LDO */
+static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
+};
+
+struct regulator_init_data ab8500_vintcore_init = {
+ .supply_regulator_dev = NULL,
+ .constraints = {
+ .name = "ab8500-vintcore",
+ .min_uV = 1200000,
+ .max_uV = 1350000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
+ .consumer_supplies = ab8500_vintcore_consumers,
+};
+
+/* supply for U8500 CSI/DSI, VANA LDO */
+static struct regulator_consumer_supply ab8500_vana_consumers[] = {
+};
+
+struct regulator_init_data ab8500_vana_init = {
+ .supply_regulator_dev = NULL,
+ .constraints = {
+ .name = "ab8500-vana",
+ .min_uV = 0,
+ .max_uV = 1200000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
+ .consumer_supplies = ab8500_vana_consumers,
+};
+
--
1.7.0
reply other threads:[~2010-06-06 13:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=mailman.73.1279037640.27306.linux-arm-kernel@lists.infradead.org \
--to=sundar.iyer@stericsson.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).