[PATCH 1/2] ARM: kirkwood: Basic support for DNS-320 and DNS-325

[jm@lentin.co.uk (Jamie Lentin)]

On Mon, 12 Mar 2012 08:17:19 -0000, Arnd Bergmann <arnd@arndb.de> wrote:

> On Monday 12 March 2012, Jason Cooper wrote:
>> > +     dnskw_gpio_register(39, "dnskw:power:sata0", 1);
>> > +     dnskw_gpio_register(40, "dnskw:power:sata1", 1);
>> > +
>> > +     /* Set NAS to turn back on after a power failure */
>> > +     dnskw_gpio_register(37, "dnskw:power:recover", 1);
>> > +}
>> > +
>>
>> I doubt this board is the only one that wants to be added while the
>> conversion to devicetree is progressing.  It makes more sense to me to
>> break the above out to a separate file, eg board-dnskw.c.  I'll follow
>> and break out the dreamplug code to board-dreamplug.c.  Otherwise, I see
>> board-dt.c becoming a long mess.
>>
>> Arnd, sound okay to you?
>
> Either way is fine with me. I personally wouldn't expect many more boards
> to come in before the DT conversion has mostly completed, but I guess you
> have a better feeling for what other hardware is out there that people
> are interested in.
>

It probably depends on how easy it is to add the gpiochips into  
devicetree. Being able to put the LED, buttons and fans in devicetree  
would make board-dt.c much more manageable. I started to look into it and  
wasn't immediately obvious, but will have a closer look.

Happy to resubmit, breaking it out into a board-dnskw.c though.

-- 
Jamie Lentin