Re: [PATCH 4/6] arm64: dts: qcom: x1e80100: Add CAMCC block definition

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 19.11.2024 2:10 PM, Bryan O'Donoghue wrote:
> Add the CAMCC block for x1e80100. The x1e80100 CAMCC block is an iteration
> of previous CAMCC blocks with the exception of having two required
> power-domains not just one.
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/x1e80100.dtsi | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> index c18b99765c25c901b3d0a3fbaddc320c0a8c1716..5119cf64b461eb517e9306869ad0ec1b2cae629e 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> @@ -3,6 +3,7 @@
>   * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>   */
>  
> +#include <dt-bindings/clock/qcom,x1e80100-camcc.h>
>  #include <dt-bindings/clock/qcom,rpmh.h>
>  #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
>  #include <dt-bindings/clock/qcom,x1e80100-dispcc.h>
> @@ -4647,6 +4648,22 @@ usb_1_ss1_dwc3_ss: endpoint {
>  			};
>  		};
>  
> +		camcc: clock-controller@ade0000 {
> +			compatible = "qcom,x1e80100-camcc";
> +			reg = <0 0x0ade0000 0 0x20000>;
> +			clocks = <&gcc GCC_CAMERA_AHB_CLK>,

This clock is not registered with the CCF

Konrad