From: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
To: "Nuno Sá" <nuno.sa@analog.com>,
openbmc@lists.ozlabs.org, linux-imx@nxp.com,
linux-stm32@st-md-mailman.stormreply.com,
linux-iio@vger.kernel.org, linux-mips@vger.kernel.org,
linux-renesas-soc@vger.kernel.org,
linux-mediatek@lists.infradead.org,
chrome-platform@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
"Lad Prabhakar" <prabhakar.mahadev-lad.rj@bp.renesas.com>,
linux-arm-msm@vger.kernel.org
Cc: Gwendal Grignou <gwendal@chromium.org>,
Jonathan Cameron <jic23@kernel.org>,
Saravanan Sekar <sravanhome@gmail.com>,
Tomer Maimon <tmaimon77@gmail.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Lorenzo Bianconi <lorenzo@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Shawn Guo <shawnguo@kernel.org>,
Olivier Moysan <olivier.moysan@foss.st.com>,
Tali Perry <tali.perry1@gmail.com>,
Thara Gopinath <thara.gopinath@linaro.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Arnd Bergmann <arnd@arndb.de>,
Benjamin Fair <benjaminfair@google.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Patrick Venture <venture@google.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Benson Leung <bleung@chromium.org>, Nancy Yuen <yuenn@google.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Zhang Rui <rui.zhang@intel.com>,
Linus Walleij <linus.walleij@linaro.org>,
Christophe Branchereau <cbranchereau@gmail.com>,
Cai Huoqing <cai.huoqing@linux.dev>,
Avi Fishman <avifishman70@gmail.com>,
Eugen Hristev <eugen.hristev@microchip.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Guenter Roeck <groeck@chromium.org>,
Paul Cercueil <paul@crapouillou.net>,
Claudiu Beznea <claudiu.beznea@microchip.com>,
Andy Gross <agross@kernel.org>, Amit Kucheria <amitk@kernel.org>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Haibo Chen <haibo.chen@nxp.com>,
Jishnu Prakash <quic_jprakash@quicinc.com>
Subject: Re: [PATCH v3 13/15] iio: adc: stm32-adc: convert to device properties
Date: Fri, 5 Aug 2022 09:25:18 +0200 [thread overview]
Message-ID: <05095a28-3db8-e7fe-72e5-2378f83eb950@foss.st.com> (raw)
In-Reply-To: <20220715122903.332535-14-nuno.sa@analog.com>
On 7/15/22 14:29, Nuno Sá wrote:
> Make the conversion to firmware agnostic device properties. As part of
> the conversion the IIO inkern interface 'of_xlate()' is also converted to
> 'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF
> dependencies from IIO.
>
> Signed-off-by: Nuno Sá <nuno.sa@analog.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Hi Nuno,
You can add my:
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Best Regards,
Thanks,
Fabrice
> ---
> drivers/iio/adc/stm32-adc.c | 125 ++++++++++++++++++++----------------
> 1 file changed, 70 insertions(+), 55 deletions(-)
>
> diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> index 3985fe972892..24248f1de1d0 100644
> --- a/drivers/iio/adc/stm32-adc.c
> +++ b/drivers/iio/adc/stm32-adc.c
> @@ -21,11 +21,11 @@
> #include <linux/io.h>
> #include <linux/iopoll.h>
> #include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> #include <linux/nvmem-consumer.h>
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
> -#include <linux/of.h>
> -#include <linux/of_device.h>
> +#include <linux/property.h>
>
> #include "stm32-adc-core.h"
>
> @@ -241,6 +241,7 @@ struct stm32_adc_cfg {
> * @chan_name: channel name array
> * @num_diff: number of differential channels
> * @int_ch: internal channel indexes array
> + * @nsmps: number of channels with optional sample time
> */
> struct stm32_adc {
> struct stm32_adc_common *common;
> @@ -267,6 +268,7 @@ struct stm32_adc {
> char chan_name[STM32_ADC_CH_MAX][STM32_ADC_CH_SZ];
> u32 num_diff;
> int int_ch[STM32_ADC_INT_CH_NB];
> + int nsmps;
> };
>
> struct stm32_adc_diff_channel {
> @@ -1530,8 +1532,8 @@ static int stm32_adc_update_scan_mode(struct iio_dev *indio_dev,
> return ret;
> }
>
> -static int stm32_adc_of_xlate(struct iio_dev *indio_dev,
> - const struct of_phandle_args *iiospec)
> +static int stm32_adc_fwnode_xlate(struct iio_dev *indio_dev,
> + const struct fwnode_reference_args *iiospec)
> {
> int i;
>
> @@ -1585,7 +1587,7 @@ static const struct iio_info stm32_adc_iio_info = {
> .hwfifo_set_watermark = stm32_adc_set_watermark,
> .update_scan_mode = stm32_adc_update_scan_mode,
> .debugfs_reg_access = stm32_adc_debugfs_reg_access,
> - .of_xlate = stm32_adc_of_xlate,
> + .fwnode_xlate = stm32_adc_fwnode_xlate,
> };
>
> static unsigned int stm32_adc_dma_residue(struct stm32_adc *adc)
> @@ -1782,14 +1784,14 @@ static const struct iio_chan_spec_ext_info stm32_adc_ext_info[] = {
> {},
> };
>
> -static int stm32_adc_of_get_resolution(struct iio_dev *indio_dev)
> +static int stm32_adc_fw_get_resolution(struct iio_dev *indio_dev)
> {
> - struct device_node *node = indio_dev->dev.of_node;
> + struct device *dev = &indio_dev->dev;
> struct stm32_adc *adc = iio_priv(indio_dev);
> unsigned int i;
> u32 res;
>
> - if (of_property_read_u32(node, "assigned-resolution-bits", &res))
> + if (device_property_read_u32(dev, "assigned-resolution-bits", &res))
> res = adc->cfg->adc_info->resolutions[0];
>
> for (i = 0; i < adc->cfg->adc_info->num_res; i++)
> @@ -1873,11 +1875,11 @@ static void stm32_adc_chan_init_one(struct iio_dev *indio_dev,
>
> static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm32_adc *adc)
> {
> - struct device_node *node = indio_dev->dev.of_node;
> + struct device *dev = &indio_dev->dev;
> const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
> int num_channels = 0, ret;
>
> - ret = of_property_count_u32_elems(node, "st,adc-channels");
> + ret = device_property_count_u32(dev, "st,adc-channels");
> if (ret > adc_info->max_channels) {
> dev_err(&indio_dev->dev, "Bad st,adc-channels?\n");
> return -EINVAL;
> @@ -1885,8 +1887,12 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
> num_channels += ret;
> }
>
> - ret = of_property_count_elems_of_size(node, "st,adc-diff-channels",
> - sizeof(struct stm32_adc_diff_channel));
> + /*
> + * each st,adc-diff-channels is a group of 2 u32 so we divide @ret
> + * to get the *real* number of channels.
> + */
> + ret = device_property_count_u32(dev, "st,adc-diff-channels");
> + ret /= (int)(sizeof(struct stm32_adc_diff_channel) / sizeof(u32));
> if (ret > adc_info->max_channels) {
> dev_err(&indio_dev->dev, "Bad st,adc-diff-channels?\n");
> return -EINVAL;
> @@ -1896,8 +1902,8 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
> }
>
> /* Optional sample time is provided either for each, or all channels */
> - ret = of_property_count_u32_elems(node, "st,min-sample-time-nsecs");
> - if (ret > 1 && ret != num_channels) {
> + adc->nsmps = device_property_count_u32(dev, "st,min-sample-time-nsecs");
> + if (adc->nsmps > 1 && adc->nsmps != num_channels) {
> dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs\n");
> return -EINVAL;
> }
> @@ -1907,21 +1913,20 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
>
> static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
> struct stm32_adc *adc,
> - struct iio_chan_spec *channels)
> + struct iio_chan_spec *channels,
> + int nchans)
> {
> - struct device_node *node = indio_dev->dev.of_node;
> const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
> struct stm32_adc_diff_channel diff[STM32_ADC_CH_MAX];
> + struct device *dev = &indio_dev->dev;
> u32 num_diff = adc->num_diff;
> int size = num_diff * sizeof(*diff) / sizeof(u32);
> - int scan_index = 0, val, ret, i;
> - struct property *prop;
> - const __be32 *cur;
> - u32 smp = 0;
> + int scan_index = 0, ret, i, c;
> + u32 smp = 0, smps[STM32_ADC_CH_MAX], chans[STM32_ADC_CH_MAX];
>
> if (num_diff) {
> - ret = of_property_read_u32_array(node, "st,adc-diff-channels",
> - (u32 *)diff, size);
> + ret = device_property_read_u32_array(dev, "st,adc-diff-channels",
> + (u32 *)diff, size);
> if (ret) {
> dev_err(&indio_dev->dev, "Failed to get diff channels %d\n", ret);
> return ret;
> @@ -1942,32 +1947,47 @@ static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
> }
> }
>
> - of_property_for_each_u32(node, "st,adc-channels", prop, cur, val) {
> - if (val >= adc_info->max_channels) {
> - dev_err(&indio_dev->dev, "Invalid channel %d\n", val);
> + ret = device_property_read_u32_array(dev, "st,adc-channels", chans,
> + nchans);
> + if (ret)
> + return ret;
> +
> + for (c = 0; c < nchans; c++) {
> + if (chans[c] >= adc_info->max_channels) {
> + dev_err(&indio_dev->dev, "Invalid channel %d\n",
> + chans[c]);
> return -EINVAL;
> }
>
> /* Channel can't be configured both as single-ended & diff */
> for (i = 0; i < num_diff; i++) {
> - if (val == diff[i].vinp) {
> - dev_err(&indio_dev->dev, "channel %d misconfigured\n", val);
> + if (chans[c] == diff[i].vinp) {
> + dev_err(&indio_dev->dev, "channel %d misconfigured\n", chans[c]);
> return -EINVAL;
> }
> }
> - stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
> - 0, scan_index, false);
> + stm32_adc_chan_init_one(indio_dev, &channels[scan_index],
> + chans[c], 0, scan_index, false);
> scan_index++;
> }
>
> + if (adc->nsmps > 0) {
> + ret = device_property_read_u32_array(dev, "st,min-sample-time-nsecs",
> + smps, adc->nsmps);
> + if (ret)
> + return ret;
> + }
> +
> for (i = 0; i < scan_index; i++) {
> /*
> - * Using of_property_read_u32_index(), smp value will only be
> - * modified if valid u32 value can be decoded. This allows to
> - * get either no value, 1 shared value for all indexes, or one
> - * value per channel.
> + * This check is used with the above logic so that smp value
> + * will only be modified if valid u32 value can be decoded. This
> + * allows to get either no value, 1 shared value for all indexes,
> + * or one value per channel. The point is to have the same
> + * behavior as 'of_property_read_u32_index()'.
> */
> - of_property_read_u32_index(node, "st,min-sample-time-nsecs", i, &smp);
> + if (i < adc->nsmps)
> + smp = smps[i];
>
> /* Prepare sampling time settings */
> stm32_adc_smpr_init(adc, channels[i].channel, smp);
> @@ -2010,22 +2030,21 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
> struct stm32_adc *adc,
> struct iio_chan_spec *channels)
> {
> - struct device_node *node = indio_dev->dev.of_node;
> const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
> - struct device_node *child;
> + struct fwnode_handle *child;
> const char *name;
> int val, scan_index = 0, ret;
> bool differential;
> u32 vin[2];
>
> - for_each_available_child_of_node(node, child) {
> - ret = of_property_read_u32(child, "reg", &val);
> + device_for_each_child_node(&indio_dev->dev, child) {
> + ret = fwnode_property_read_u32(child, "reg", &val);
> if (ret) {
> dev_err(&indio_dev->dev, "Missing channel index %d\n", ret);
> goto err;
> }
>
> - ret = of_property_read_string(child, "label", &name);
> + ret = fwnode_property_read_string(child, "label", &name);
> /* label is optional */
> if (!ret) {
> if (strlen(name) >= STM32_ADC_CH_SZ) {
> @@ -2050,7 +2069,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
> }
>
> differential = false;
> - ret = of_property_read_u32_array(child, "diff-channels", vin, 2);
> + ret = fwnode_property_read_u32_array(child, "diff-channels", vin, 2);
> /* diff-channels is optional */
> if (!ret) {
> differential = true;
> @@ -2067,7 +2086,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
> stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
> vin[1], scan_index, differential);
>
> - ret = of_property_read_u32(child, "st,min-sample-time-ns", &val);
> + ret = fwnode_property_read_u32(child, "st,min-sample-time-ns", &val);
> /* st,min-sample-time-ns is optional */
> if (!ret) {
> stm32_adc_smpr_init(adc, channels[scan_index].channel, val);
> @@ -2085,14 +2104,13 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
> return scan_index;
>
> err:
> - of_node_put(child);
> + fwnode_handle_put(child);
>
> return ret;
> }
>
> -static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
> +static int stm32_adc_chan_fw_init(struct iio_dev *indio_dev, bool timestamping)
> {
> - struct device_node *node = indio_dev->dev.of_node;
> struct stm32_adc *adc = iio_priv(indio_dev);
> const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
> struct iio_chan_spec *channels;
> @@ -2102,7 +2120,7 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
> for (i = 0; i < STM32_ADC_INT_CH_NB; i++)
> adc->int_ch[i] = STM32_ADC_INT_CH_NONE;
>
> - num_channels = of_get_available_child_count(node);
> + num_channels = device_get_child_node_count(&indio_dev->dev);
> /* If no channels have been found, fallback to channels legacy properties. */
> if (!num_channels) {
> legacy = true;
> @@ -2133,7 +2151,8 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
> return -ENOMEM;
>
> if (legacy)
> - ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels);
> + ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels,
> + num_channels);
> else
> ret = stm32_adc_generic_chan_init(indio_dev, adc, channels);
> if (ret < 0)
> @@ -2215,9 +2234,6 @@ static int stm32_adc_probe(struct platform_device *pdev)
> bool timestamping = false;
> int ret;
>
> - if (!pdev->dev.of_node)
> - return -ENODEV;
> -
> indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
> if (!indio_dev)
> return -ENOMEM;
> @@ -2226,17 +2242,16 @@ static int stm32_adc_probe(struct platform_device *pdev)
> adc->common = dev_get_drvdata(pdev->dev.parent);
> spin_lock_init(&adc->lock);
> init_completion(&adc->completion);
> - adc->cfg = (const struct stm32_adc_cfg *)
> - of_match_device(dev->driver->of_match_table, dev)->data;
> + adc->cfg = device_get_match_data(dev);
>
> indio_dev->name = dev_name(&pdev->dev);
> - indio_dev->dev.of_node = pdev->dev.of_node;
> + device_set_node(&indio_dev->dev, dev_fwnode(&pdev->dev));
> indio_dev->info = &stm32_adc_iio_info;
> indio_dev->modes = INDIO_DIRECT_MODE | INDIO_HARDWARE_TRIGGERED;
>
> platform_set_drvdata(pdev, indio_dev);
>
> - ret = of_property_read_u32(pdev->dev.of_node, "reg", &adc->offset);
> + ret = device_property_read_u32(dev, "reg", &adc->offset);
> if (ret != 0) {
> dev_err(&pdev->dev, "missing reg property\n");
> return -EINVAL;
> @@ -2265,7 +2280,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
> }
> }
>
> - ret = stm32_adc_of_get_resolution(indio_dev);
> + ret = stm32_adc_fw_get_resolution(indio_dev);
> if (ret < 0)
> return ret;
>
> @@ -2282,7 +2297,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
> timestamping = true;
> }
>
> - ret = stm32_adc_chan_of_init(indio_dev, timestamping);
> + ret = stm32_adc_chan_fw_init(indio_dev, timestamping);
> if (ret < 0)
> goto err_dma_disable;
>
next prev parent reply other threads:[~2022-08-05 7:27 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-15 12:28 [PATCH v3 00/15] make iio inkern interface firmware agnostic Nuno Sá
2022-07-15 12:28 ` [PATCH v3 01/15] iio: inkern: only release the device node when done with it Nuno Sá
2022-07-15 12:28 ` [PATCH v3 02/15] iio: inkern: fix return value in devm_of_iio_channel_get_by_name() Nuno Sá
2022-07-15 12:28 ` [PATCH v3 03/15] iio: inkern: only return error codes in iio_channel_get_*() APIs Nuno Sá
2022-08-06 17:45 ` Jonathan Cameron
2022-07-15 12:28 ` [PATCH v3 04/15] iio: inkern: split of_iio_channel_get_by_name() Nuno Sá
2022-08-06 18:30 ` Jonathan Cameron
2022-07-15 12:28 ` [PATCH v3 05/15] iio: inkern: move to fwnode properties Nuno Sá
2022-08-06 17:59 ` Jonathan Cameron
2022-08-06 18:38 ` Jonathan Cameron
2022-07-15 12:28 ` [PATCH v3 06/15] thermal: qcom: qcom-spmi-adc-tm5: convert to IIO fwnode API Nuno Sá
2022-07-15 21:40 ` Daniel Lezcano
2022-07-15 12:28 ` [PATCH v3 07/15] iio: adc: ingenic-adc: convert to IIO fwnode interface Nuno Sá
2022-07-15 12:28 ` [PATCH v3 08/15] iio: adc: ab8500-gpadc: convert to device properties Nuno Sá
2022-08-06 18:03 ` Jonathan Cameron
2022-08-06 18:08 ` Jonathan Cameron
2022-07-15 12:28 ` [PATCH v3 09/15] iio: adc: at91-sama5d2_adc: " Nuno Sá
2022-07-18 5:21 ` Claudiu.Beznea
2022-08-06 18:49 ` Jonathan Cameron
2022-08-18 8:39 ` Claudiu.Beznea
2022-07-15 12:28 ` [PATCH v3 10/15] iio: adc: qcom-pm8xxx-xoadc: " Nuno Sá
2022-07-15 12:28 ` [PATCH v3 11/15] iio: adc: qcom-spmi-vadc: " Nuno Sá
2022-07-15 12:29 ` [PATCH v3 12/15] iio: adc: qcom-spmi-adc5: " Nuno Sá
2022-08-06 18:20 ` Jonathan Cameron
2023-01-16 20:44 ` Marijn Suijten
2023-01-17 8:53 ` Andy Shevchenko
2023-01-17 9:06 ` Andy Shevchenko
2023-01-17 9:40 ` Andy Shevchenko
2023-01-17 22:42 ` Marijn Suijten
2022-07-15 12:29 ` [PATCH v3 13/15] iio: adc: stm32-adc: " Nuno Sá
2022-08-05 7:25 ` Fabrice Gasnier [this message]
2022-08-06 18:15 ` Jonathan Cameron
2022-08-06 18:53 ` Jonathan Cameron
2022-07-15 12:29 ` [PATCH v3 14/15] iio: inkern: remove OF dependencies Nuno Sá
2022-07-15 12:29 ` [PATCH v3 15/15] iio: inkern: fix coding style warnings Nuno Sá
2022-07-15 16:58 ` Andy Shevchenko
2022-08-06 18:56 ` [PATCH v3 00/15] make iio inkern interface firmware agnostic Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=05095a28-3db8-e7fe-72e5-2378f83eb950@foss.st.com \
--to=fabrice.gasnier@foss.st.com \
--cc=Michael.Hennerich@analog.com \
--cc=agross@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandre.torgue@foss.st.com \
--cc=amitk@kernel.org \
--cc=andy.shevchenko@gmail.com \
--cc=arnd@arndb.de \
--cc=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=bjorn.andersson@linaro.org \
--cc=bleung@chromium.org \
--cc=cai.huoqing@linux.dev \
--cc=cbranchereau@gmail.com \
--cc=chrome-platform@lists.linux.dev \
--cc=claudiu.beznea@microchip.com \
--cc=daniel.lezcano@linaro.org \
--cc=eugen.hristev@microchip.com \
--cc=festevam@gmail.com \
--cc=groeck@chromium.org \
--cc=gwendal@chromium.org \
--cc=haibo.chen@nxp.com \
--cc=jic23@kernel.org \
--cc=kernel@pengutronix.de \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=lorenzo@kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=nicolas.ferre@microchip.com \
--cc=nuno.sa@analog.com \
--cc=olivier.moysan@foss.st.com \
--cc=openbmc@lists.ozlabs.org \
--cc=paul@crapouillou.net \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=quic_jprakash@quicinc.com \
--cc=rafael@kernel.org \
--cc=rui.zhang@intel.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=sravanhome@gmail.com \
--cc=tali.perry1@gmail.com \
--cc=thara.gopinath@linaro.org \
--cc=tmaimon77@gmail.com \
--cc=venture@google.com \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).