Re: [PATCH v2 2/2] PCI: qcom: Add X1E80100 PCIe support

[neil.armstrong@linaro.org]

On 02/02/2024 09:41, Abel Vesa wrote:
> On 24-02-01 20:20:40, Konrad Dybcio wrote:
>> On 29.01.2024 12:10, Abel Vesa wrote:
>>> Add the compatible and the driver data for X1E80100.
>>>
>>> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
>>> ---
>>>   drivers/pci/controller/dwc/pcie-qcom.c | 1 +
>>>   1 file changed, 1 insertion(+)
>>>
>>> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
>>> index 10f2d0bb86be..2a6000e457bc 100644
>>> --- a/drivers/pci/controller/dwc/pcie-qcom.c
>>> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
>>> @@ -1642,6 +1642,7 @@ static const struct of_device_id qcom_pcie_match[] = {
>>>   	{ .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 },
>>>   	{ .compatible = "qcom,pcie-sm8450-pcie1", .data = &cfg_1_9_0 },
>>>   	{ .compatible = "qcom,pcie-sm8550", .data = &cfg_1_9_0 },
>>> +	{ .compatible = "qcom,pcie-x1e80100", .data = &cfg_1_9_0 },
>>
>> I swear I'm not delaying everything related to x1 on purpose..
>>
> 
> No worries.
> 
>> But..
>>
>> Would a "qcom,pcie-v1.9.0" generic match string be a good idea?
> 
> Sure. So that means this would be fallback compatible for all the following platforms:
> 
> - sa8540p
> - sa8775p
> - sc7280
> - sc8180x
> - sc8280xp
> - sdx55
> - sm8150
> - sm8250
> - sm8350
> - sm8450-pcie0
> - sm8450-pcie1
> - sm8550
> - x1e80100
> 
> Will prepare a patchset.

Honestly I don't know from where comes the 1_9_0 here, I didn't find a match... none of the IP version matches.

So I consider this "1_9_0" is a software implementation, not a proper IP version so I'm against using this.

But, using close cousins as fallback that are known to share 99% of IP design is ok to me, this is why I used the sm8550 as fallback because the IP *behaves* like the one in sm8550.

Neil

> 
>>
>> Konrad
>